You are here: Civil Engineering / Research & Consulting / Publications / 1991-1995

1995 Publications

Books and Book Chapters | Journal Papers | Conference Papers
Research Reports |

Books and Book Chapters

  • Karihaloo BL (1995) Fracture Mechanics and Structural Concrete Longman Scientific and Technical United Kingdom.
  • Abel A (1995) The History of the Atomic Bomb Puski Publishers Budapest.
  • Rowe RK, Quigley RM, Booker JR (1995) Clayey Barrier Systems for Waste Disposal Facilities E & FN Spon England.
  • Karihaloo BL (1995) A topical encyclopedia of current knowledge dedicated to Alan Arnold Griffith Modified Griffith Approach to the Fracture of Quasi-brittle Materials G Cherepanov Krieger Publication Co, Melbourne USA, 358-396.
  • Airey DW, Huang JT (1995) Effects of cement and density on the stiffness of an artificially cemented sand Pre-failure deformation of Geomaterials Shibuya, Mitachi, Miura Balkema, 1095-1098.
Back to Top

Journal Papers

  • Abel A (1995) Dislocation-associated elastic energy storage in mechanical deformations Materials Science and Engineering, 164, 220-225.
  • Adamu A, Karihaloo BL (1995) Minimum-cost design of RC frames using the DCOC method. Part I, Columns under uniaxial bending actions Journal of Structural Optimization, 10, 16-32.
  • Adamu A, Karihaloo BL (1995) Optimal design of RC beams with segmentation using COC Journal of Structural Optimization, 9, 220-235
  • Al-Douri RH, Poulos HG (1995) Predicted and observed cyclic performance of piles in calcareous sand Journal of Geotechnical Engineering, 121, 11-16.
  • Andreasen JH, Moeller CV, Karihaloo, BL (1995) Fatigue crack growth from small surface cracks in TTC Journal of American Ceramic Society, 78, 406-410.
  • Bernard ES, Bridge RQ, Hancock GJ (1995) Tests of profiled steel decks with flat-hat stiffeners Journal of Structural Engineering, 121, 1175-1182.
  • Clarke MJ, Hancock GJ (1995) Design of top chord of stressed-arch frames Journal of Structural Engineering, 121, 201-213.
  • Clarke MJ, Hancock GJ (1995) Tests and nonlinear analyses of small-scale stressed-arch frames Journal of Structural Engineering, 121, 187-200.
  • Elzein, Abbas and Jerome Balesdent, 'Mechanistic simulation of vertical distribution of carbon concentrations and residence times in soils', Soil Science Society of America Journal, 59:1328-1335, (1995).
  • Facioni RJ, Kwok KCS, Samali B (1995) Wind tunnel investigations of active vibration control of tall buildings Journal of Wind Engineering and Industrial Aerodynamics, 54, 55, 397-412.
  • Glanville MJ, Kwok KCS (1995) Dynamic characteristics and wind induced response of steel lattice towers Journal of Wind Engineering and Industrial Aerodynamics, 54,55, 133-149.
  • Han SH, Adamu A, Karihaloo BL (1995) Application of DCOC to the optimum prestressed concrete beam design Journal of Engineering Optimization, 25, 180-199.
  • Huang X, Karihaloo BL (1995) Asymptotics of three-dimensional macrocrack-microcrack interaction International Journal of Solids and Structures, 32, 1495-1500.
  • Huang X, Rose LRF, Karihaloo, BL (1995) Effective spring constant for planar arrays of circular cracks International Journal of Damage Mechanics, 4, 103-116.
  • Jaafari A, Coles J, Anderson R. (1995) Risk assessment on development proejcts, the case of lost opportunities The Australian Institute of Building Papers, 6, 21-35.
  • Lee CY, Hull TS, Poulos HG (1995) Simplified pile-slope stability analysis Computers and Geotechnics, 17, 11-16.
  • Mackriell LE, Kwok KCS, Samali B (1995) Comparison of velocity and acceleration feedback used in the active control of a wind-loaded structure with an AT Civil Engineering Transactions,Institution of Engineering, 37, 255-263.
  • Moeller CV, Karihaloo BL (1995) Crack front trapping in transformation toughened ceramics International Journal of Fracture, 72, 171-181.
  • Moeller CV, Karihaloo BL (1995) Multiple cracks in transformation toughened ceramics Mechanics of Materials, 31, 325-334.
  • Papangelis JP, Hancock GJ (1995) Computer analysis of thin-walled structural members Computers and Structures ,56, 157-176.
  • Parbery RD, Karihaloo BL (1995) Optimum circular shafts in forward precession Journal of Engineering Optimization, 25, 180-199.
  • Pi YL, Papangelis JP, Trahair NS (1995) Prebuckling deformations and flexural-torsional buckling of arches Journal of Structural Engineering, 121, 1313-1322.
  • Pi YL, Trahair NS (1995) Inelastic torsion of steel I-beams Journal of Structural Engineering, 121, 609-620.
  • Pi YL, Trahair NS (1995) Lateral buckling strengths of cold-formed rectangular hollow sections Thin-Walled Structures, 22, 71-95.
  • Pi YL, Trahair NS (1995) Plastic collapse analysis of torsion Journal of Structural Engineering, 121, 1389-1395.
  • Poulos HG (1995) Design of reinforcing piles to increase slope stability Canadian Geotechnical Journal, 32, 808-818.
  • Poulos HG, Chen LT, Hull,TS (1995) Model tests on single piles subjected to lateral soil movements Soils and Foundations, 35, 485-492.
  • Rasmussen KJR, Hancock GJ (1995) Tests of high strength steel columns Journal of Constructional Steel Research, 34, 27-52.
  • Redjvani A, Wheen RJ (1995) Concrete walls display reusable formwork Civil Engineering - ASCE, 65, 27.
  • Redjvani A, Wheen RJ (1995) Fabulous flexible formwork - an Australian invention Australian Concrete Construction, 8, 13-14.
  • Redjvani A, Wheen RJ (1995) Flexible formwork systems Concrete in Australia, 21, 21-23.
  • Rowe RK, Booker JR (1995) A finite layer technique for modelling complex Landifill history Canadian Geotechnical Journal, 32, 660-676.
  • Ta LD, Small JC (1995) Analysis of piled raft systems in layered soils International Journal for Numerical and Analytical Methods in Geomechanics, 20, 57-72.
  • Tabucanon J, Airey DA, Poulos HG (1995) Pile skin friction in sands from constant normal stiffness tests Geotechnical Testing Journal ASTM, 18, 350-364.
  • Thomsen, NB, Karihaloo, BL (1995) Optimum microstructure of transformation toughened ceramics for enhanced wear performance Journal of Americal Ceramic Society, 78, 3-8.
  • Wang J, Karihaloo BL (1995) Effective moduli of cemented granular composites Journal of Australian Ceramic Society, 30, 29-40.
  • Wang J, Karihaloo BL (1995) Fracture mechanics and optimization - A useful tool for fibre-reinforced composite design Journal of Composite Structures, 31, 453-466.
  • Wang J, Karihaloo BL (1995) Multiple cracking in angle-ply composite laminates Journal of Composite Materials, 29, 1321-1336.
  • Zhang WJ, Xu YL, Kwok KCS (1995) Interference effects on aeroelastic torsional response of structurally asymmetric tall buildings Journal of Wind Engineering and Industrial Aerodynamics, 57, 41-61.
  • Zhao XL, Hancock GJ (1995) Butt welds and transverse fillet welds in thin cold-formed RHS Members Journal of Structural Engineering, 121, 1674-1682.
  • Zhao XL, Hancock GJ (1995) Longitudanal fillet welds in thin cold-formed RHS members Journal of Structural Engineering, 121, 1683-1690.
  • Zhao XL, Hancock GJ (1995) Square and rectangular hollow sections under transverse end-bearing force Journal of Structural Engineering, 121, 1323-1329.
  • Zhao XL, Hancock GJ, Trahair NS (1995) Lateral buckling tests of cold-formed RHS beams Journal of Structural Engineering, 121, 1565-1573.
Back to Top

Conference Papers

  • Airey DW, Carter JP (1995) Properties of a natural clay used to contain liquid wastes Proceedings Geonvironment 2000, ASCE Specialty Conference American Society of Civil Engineers New York, 758-774.
  • Ansourian P, Showkati H, Sengupta M, Vodenitcharova T (1995) Analysis, computation and experiments for cylindrical shells Proceedings of the International Conference on Structural Stability and Design, A.A. Balkeema Rotterdam, 385-390.
  • Ansourian P, Showkati H, Sengupta M, Vodenitcharova T (1995) The behaviour of cylindrical shells under uniform and non-uniform external pressure Proceedings, 14th Australasian Conference on the Mechanics of Structures and Materials The University of Tasmania Hobart, 620-636.
  • Bernard ES, Reid SG (1995) Impact strength of glass Proceedings, 14th Australasian Conference on Mechanics of Structures and Materials University of Tasmania Hobart, 227-232.
  • Bridge RQ, O'Shea MD, Gardner A, Grigson R, Tyrrell J (1995) Local buckling of square thin-walled steel tubes with concrete infill Proceedings International Conference on Structural Stability and Design Balkema Rotterdam, 307-314.
  • Carter JP, Xioa B (1995) A deep basement excavation - comparison of field measurements and numerical predictions Proceedings 8th International Congress on Rock Mechanics A.A. Balkema, Holland Rotterdam, 373-378.
  • Clarke MJ, Bridge RQ (1995) Application of the notional load approach to the design of multi-storey steel frames Proceedings, 1995 Annual Technical Session, Structural Stability Research Council , Structural Stabilty Research Council Bethlehem, USA, 191-211.
  • Clarke MJ, Bridge RQ (1995) Notional load approach for in-plane column strength in unbraced frames Proceedings, 1995 ASCE Structures Congress American Society of Civil Engineers New York, 84-87.
  • Clarke MJ, Bridge RQ (1995) Stiffness and strength of bracing for compression members Proceedings, 1995 ASCE Structures Congress American Society of Civil Engineers New York, 84-87.
  • Doolan TF, Carter DJ, Taylor RJ, Wheen, RJ (1995) A concrete/ timber cure for a major bridge headache Concrete 95 , Concrete Institute of Australia/ Federation Internationale de la Precontrainte , Concrete Institute of Australia, Australia Brisbane, 589-596.
  • Gao H, Kwok KCS, Samali, B (1995) Dynamic characterisation of multiple tuned liquid column dampers Proceedings, Asia-Pacific Vibration Conference'95 University of Technology Malaysia Malaysia, 429-434.
  • Hancock GJ (1995) Design for distortional buckling of flexural members Proceedings, 3rd International Conference on Steel and Aluminium Structures MAS Printing Co Istanbul, 275-281.
  • Hancock GJ, Davids AJ, Go E (1995) Limit states design of cold-formed steel structures in Australia Proceedings, 4th Pacific Structural Steel Conference Pergamon Singapore, 15-27.
  • Hancock GJ, Syam A, Chapman B, Hogan T (1995) Connection research, design and practice in Australia, Proceedings, 3rd International Workshop on Connections in Steel Structures University of Trento Istanbul.
  • Hoare T, Samali B, Kwok KCS (1995) A practical preliminary design guide for the control of tall buildings using active mass dampers Proceedings, Asia-Pacific Vibration Conference'95 University of Technology, Malaysia, 203-208.
  • Jaafari A (1995) Education for a construction vision, an Australian perspective Procceedings, The 1995 UNESCO International Congress of Engineering Deans And Industry Leaders IEAust and Monash University Australia, 592 - 600.
  • Lav MA, Carter JP, Booker JR (1995) The effect of fissures on the bearing capacity of clays Proceedings, 14th Australasian Conference on the Mechanics of Structures and Materials The University of Tasmania Hobart, 38-43.
  • Love DN, Bierbaum SJ, Poulos HG (1995) Seismic risk analysis and microzonation of Adelaide Proceedings of Pacific Conference on Earthquake Engineering Australian Earthquake Engineering Society, 59-67.
  • Mackriell LE, Kwok KCS, Samali B (1995) Active control of the along-wind and cross-wind acceleration of a tall building Proceedings, 9th International Conference on Wind Engineering Wiley Eastern Limited New Delhi, 1667-1678.
  • Ng KLA, Small JC (1995) Simulation of dams constructed with unsaturated fills during construction and water impounding Proceedings, 1st International Conference on Unsaturated Soils Balkema Rotterdam, 281-286.
  • O'Shea, MD, Bridge, RQ (1995) Circular Concrete Filled Steel Tubes Proceedings Concrete 95 Concrete Institute of Australia, Australia, 569-578.
  • O'Shea, MD, Bridge, RQ (1995) Circular thin-walled concrete filled steel tubes Proceedings, 4th Pacific Structural Steel Conference , Pergamon Great Britian, 53-60.
  • Papangelis JP, Hancock GJ (1995) Cross-section analysis of thin-walled structures by computer Proceedings, International Conference on Lightweight Structures in Civil Engineering Magat Poland, 405-413.
  • Papangelis JP, Trahair NS, Hancock GJ (1995) Elastic flexural-torsional buckling of structures by computer Proceedings, 6th International Conference on Civil and Structural Engineering Computing Civil-Comp Press Scotland, 109-119.
  • Pi YL, Trahair NS (1995) Nonlinear inelastic analysis of arches Proceedings, International Conference on Structural Stability and Design AA Balkema Rotterdam 113-118.
  • Poulos HG, Small JC (1995) Development of new design charts for concrete industrial slabs Proceedings, Concrete [95] - Towards Better Concrete Structures Concrete Institute of Australia Brisbane, 615-624.
  • Poulos HG,White W (1995) Earthquake response of typical soil deposits in the Newcastle area Proceedings,Conference on Engineering Geology of the Newcastle-Gosford Region University of New Castle Newcastle, 393-404.
  • Redjvani A, Wheen RJ (1995) Flexible formwork system for construction of marine structures (patent pending) 12th Australasian Coastal and Ocean Engineering Conference & 5th Australasian Port and Harbour Conference Institution of Engineers, Australia Melbourne, 423-432.
  • Reid SG (1995) Load testing for reliability based design of culverts Proceedings, 7th International Conference on Applications of Statistics and Probability in Civil Engineering Balkema Rotterdam, 903-909.
  • Reid SG (1995) Reliability-based pattern loads for design Extended Abstracts, Asian-Pacific Symposium on Structural Reliability and its Applications University of Tokyo Tokyo, 27.
  • Reid SG (1995) Risk assessment for aircraft navigation performance standards Proceedings, Conference on Integrated Risk Assessment Balkema Rotterdam, 125-132.
  • Reid SG (1995) Structural prototype testing for reliability-based design Proceedings, 5th East Asia-Pacific Conference on Structural Engineering and Construction Griffith University Gold Coast, 2055-2060.
  • Rogers CA, Schuster RM (1995) Flange/web distortional buckling of cold formed steel sections in bending Proceedings of the Third International Conference on Steel and Aluminium Structures Bogazici University Istanbul, Turkey, 49-56.
  • Rousch CJ, Hancock GJ (1995) Comparison of tests of bridged and unbridged purlins with a non-linear analysis model Proceedings, 4th Pacific Structural Steel Conference Pergamon Singapore, 331-358.
  • Samali B, Templeton D, Kwok KCS (1995) Control of along-wind vibrations of tall buildings by multiple tuned liquid column dampers Proceedings, 9th International Conference on Wind Engineering Wiley Eastern Limited New Delhi, 1655-1666.
  • Seedsman RW, Poulos HG, Best R (1995) Application of pile theory to ground support design Proceedings,Underground Operators Conference Aus IMM, 3-8.
  • Showkati H., Ansourian P (1995) Practical stiffening of cylindrical shells against buckling collapse Proceedings, 5th International Conference on Bulk Materials Storage, Handling and Transportation The Institution of Engineers Australia Barton, Australian Capital Territory Vol. 2, 439-444.
  • Sully RM, Hancock GJ (1995) Behaviour of cold-formed slender section SHS beam-columns Proceedings, 4th Pacific Structural Steel Conference Pergamon Singapore, 335-342.
  • Ta LD, Small JC (1995) Finite layer analysis of pile groups in layered soils Proceedings of the Fifth International Symposium on Numerical Models Balkema Rotterdam, 577-582.
  • Trahair NS (1995) Stability and design of steel beams and arches Proceedings, International Conference on Structural Stability and Design AA Balkema Rotterdam, 3-12.
  • Trahair NS, Pi, YL (1995) Torsion, bending, and buckling of steel beams Proceedings, International Conference on Stability of Structures Allied Publishers Ltd. Coimbatore, 41-55.
  • Wang JC, Apperley LW (1995) Application of a hybrid laplace transform/finite element method to transient mass transport problems Proceedings, 6th Asian Congress of Fluid Mechanics Nanyang Technological University of Singapore Singapore, 477-480.
  • Wheeler AT, Clarke MJ, Hancock GJ (1995) Tests of bolted flange plate connections joining square and rectangular hollow sections Proceedings, 4th Pacific Structural Steel Conference Pergamon Singapore, 97-103.
  • Wheeler AT, Clarke MJ, Hancock GJ (1995) Tests of bolted moment end plate connections in tubular members Proceedings, 14th Australasian Conference on the Mechanics of Structures and Materials University of Tasmania Hobart, 331-336.
  • Wheen RJ (1995) After cracking - what then- Current Developments and Innovative Applications in Prestressed Concrete , Concrete Institute of Australia Sydney, 1-16.
  • Wheen RJ (1995) Understanding composite actions Current Developments and Innovative Applications in Prestressed Concrete Concrete Institute of Australia Sydney, 17-32.
  • Zhao XL, Hancock GJ (1995) Welded connections in thin-cold-formed rectangular hollow sections Proceedings, 3rd International Workshop on Connections in Steel Structures University of Trento Istanbul.
  • Zhao XL, Hancock GJ, Trahair NS, Pi, YL (1995) Lateral buckling of cold-formed RHS beams Proceedings, International Conference on Structural Stability and Design Balkema Rotterdam, 55-60.
Back to Top