You are here: Civil Engineering / Research & Consulting / Publications / 1996-2000

1998 Publications

Books and Book Chapters | Journal Papers | Conference Papers
Research Reports | Higher Degree Theses

Books and Book Chapters

  • Trahair NS, Bradford MA (1998), The Behaviour and Design of Steel Structures to AS 4100, Third edition, E & FN Spon, ISBN 0 419 22920 5
  • Jones ISF (1998), Applications of SAR, Remote Sensing of the Pacific Ocean by Satellites, Ed. RA Brown, Earth Ocean & Space, Sydney, NSW, 90-92.
  • Trahair NS, Papangelis JP, Pi Y-L (1998), Recent Australian Research on the Strengths of Steel Arches, Festschrift, Technische Universitat Berlin.
Back to Top

Journal Papers

  • Bridge RQ, Clarke MJ, Osterrieder P, Pi Y, Trahair NS (1998), Design by advanced analysis, Journal of Constructional Steel Research, 46, 1-3, Paper 144, 93-101 (on CD-ROM).
  • Elzein AH and John R. Booker (1999), 'Groundwater pollution by organic compounds: a two-dimensional solution of contaminant transport equations in stratified porous media with multiple sources of non-equilibrium partitioning', International Journal for Numerical and Analytical Methods in Geomechanics, 23:1717-1732, (1999).
  • Elzein AH and John R. Booker (1999), 'Groundwater pollution by organic compounds: a three-dimensional solution of contaminant transport equations in stratified porous media with multiple non-equilibrium partitioning', International Journal for Numerical and Analytical Methods in Geomechanics, 23:1733-1762, (1999).
  • Fernando N, Carter JP (1998), Elastic analysis of buried pipes under surface patch loadings, Journal of Geotechnical and Geoenvironmental Engineering, 124, No.8,
    720-728.
  • Gizejowski MA, Papangelis J, Parameswar HC (1998), Stability design of semi-continuous steel frame structures, Journal of Constructional Steel Research, 46, No.1-3, Paper 148, 99-101.
  • Hancock GJ, Rasmussen KJR (1998), Recent research on thin-walled beam-columns, Thin-Walled Structures, 32, No.1-3, 3-18.
  • Hancock GJ, Rogers C (1998), Design of cold-formed steel structures of high strength steel, Journal of Constructional Steel Research, 46, No. 1-3, Paper 97, 167-168, (on CD-ROM).
  • Hasham A, Rasmussen KJR (1998), Section capacity of thin-walled I-section beam-columns, Journal of Structural Engineering, 124, No.4, 351-359.
  • Huang JT, Airey D (1998), Properties of artificially cemented carbonate sand, Journal of Geotechnical and Geoenvironmental Engineering, 492-499.
  • Jaafari A, Manivong K (1998), Towards a smart project management information system, International Journal of Project Management, 16, No.6, 249-265.
  • Jonaidi M, Ansourian P (1998), Harmonic settlement effects on uniform and tapered tank shells, Thin-Walled Structures, 31, No.1-3, 237-255.
  • Loganathan N, Poulos HG (1998), Analytical prediction for tunnelling-induced ground movements in clays, Journal of Geotechnical and Geoenvironmental Engineering, September, 846-856.
  • Papangelis J, Hancock GJ, Trahair NS (1998), Computer design of cold-formed C-and Z-section purlins, Journal of Constructional Steel Research, 46, No.1-3, Paper No. 098, 1-16, (on CD-ROM).
  • Papangelis J, Trahair NS, Hancock GJ (1998), Elastic flexural-torsional buckling of structures by computer, Computers and Structures, 68, 125-137.
  • Pi Y, Put BM, Trahair NS (1998), Lateral buckling strengths of cold-formed channel section beams, Journal of Structural Engineering, 124, No.10, 1182-1191.
  • Pi Y, Trahair NS (1998), Non-linear buckling and postbuckling of elastic arches, Engineering Structures, 20, No.7, 571-579.
  • Pi Y, Trahair NS (1998), Out-of-plane inelastic buckling and strength of steel arches, Journal of Structural Engineering, 124, 2, 174-183.
  • Rasmussen KJR, Hancock GJ (1998), Buckling analysis of thin-walled structures: analytical developments and applications, Progress in Structural Engineering and Materials, 1, 3, 316-322.
  • Rasmussen KJR, Hasham A (1998), Flexural and flexural-torsional bifurcation of locally buckled beam-columns, Thin-Walled Structures, 29, No.1-4, 203-233.
  • Rasmussen KJR, Rondal J (1998), A unified approach to column design, Journal of Constructional Steel Research, 127-128, 46, No.'S1-3, (on CD-ROM).
  • Rogers C, Hancock GJ (1998), Bolted connection tests of thin G550 and G300 sheet steels, Journal of Structural Engineering, 124, No.7, 798-808.
  • Sathikumar S, Karihaloo BL, Reid S (1998), A model for ageing visco-elastic tension softening materials, Mechanics of Cohesive-Frictional Materials, 3, 27-39.
  • Ta LD, Small JC (1998), Analysis and performance of pile draft foundations on layered soils-case studies, Soils and Foundations, 38, No.4, 145-150.
  • Teh LH, Clarke MJ (1998), Co-rotational and Lagrangian formulations for elastic three-dimensional beam finite elements, Journal of Constructional Steel Research, 48, No.2/3, 123-144.
  • Thepmongkorn S, Kwok KCS (1998), Wind-induced coupled translational-torsional motion of tall buildings, Wind & Structures, 1, No 1, 43-57.
  • Thorne C (1998), Penetration and load capacity of marine drag anchors in soft clay, Journal of Geotechnical and Geoenvironmental Engineering, 124, No.10, 945-953.
  • Valentino J, Trahair NS (1998), Torsional restraint against elastic lateral buckling, Journal of Structural Engineering,124, No.10, 1217-1225.
  • Vodenitcharova T, Ansourian P (1998), Hydrostatic, wind and non-uniform lateral pressure solutions for containment vessels, Thin-Walled Structures, 31, No.1-3, 221-236.
  • Wheeler A, Clarke MJ, Hancock GJ, Murray M (1998), Design model for bolted moment end plate connections joining rectangular hollow sections, Journal of Structural Engineering, 124, No.2, 164-173.
  • Wilkinson TJ, Hancock GJ (1998), Tests to examine compact web slenderness of cold-formed RHS, Journal of Structural Engineering, 124, No.10, 1166-1174.
  • Young B, Rasmussen KJR (1998), Inelastic bifurcation analysis of locally buckled channel columns, Thin-Walled Structures: Research and Development, 409-416.
  • Young B, Rasmussen KJR (1998), Tests of fixed-ended plain channel columns, Journal of Structural Engineering, 124, No.2, 131-139.
  • Young B, Rasmussen KJR (1998), Design of lipped channel columns, Journal of Structural Engineering, 124, No.2, 140-148.
  • Zhao XL, Hancock GJ (1998), Recent research on cold-formed tubular structures, Journal of Constructional Steel Research, 46, No.1-3, Paper 229, 1-12 (on CD-ROM).
  • Zheng H, Abel A (1998), Stress concentration and fatigue of profiled reinforcing steels, International Journal of Fatigue, 20, No.10, 767-773.
Back to Top

Conference Papers

  • Abel A, Fletcher D, Graham MD (1998), Low cycle fatigue of stainless steels; a comparative study, Proceedings, Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Germany, 69-74.
  • Bambach MR, Merrick JT, Hancock GJ (1998), Distortional buckling formulae for thin walled channel and Z-sections with return lips, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St. Louis, Missouri, USA, 21-37.
  • Denoon R, Wood G, Hitchcock PA, Kwok KCS (1998), Full-scale measurement of dynamic characteristics of an apartment block during construction, Proceedings, Australasian Structural Engineering Conference, Auckland, NZ, 1, 501-505.
  • Denoon RO, Letchford CW, Kwok KCS, Morrison DL (1998), Wind-induced motion of two air traffic control towers and motion perception of their occupants, Proceedings, Australasian Structural Engineering, Auckland, NZ, 1, 493-500.
  • Elzein AH and John R. Booker (1998), 'A time-dependent three-dimensional model of stress state of soil and rock near heat sources', 4th International Symposium on Environmental Geotechnology and Global Sustainable Development, Boston, USA, (1998).
  • Gupta V, Poulos HG, Reid SG (1998), Environmental management: Engineering the Water-Environment and Geo-Environment, Micro-zonation of Delhi: an urgent need, Wollongong, NSW, 2, 1055-1063.
  • Haldar A, Madsen H, Moan T, Reid SG (1998), Risk and reliability methods in engineering practice and public policy, Proceedings, Structural Safety and Reliability, Kyoto, Japan, 1, 75-76.
  • Holmes J, Kwok KCS (1998), Comparisons between the wind load provisions of ISO 4354, ENV 1991-2-4, ASCE 7-95, Proceedings, Australasian Structural Engineering, Auckland, NZ, 2, 999-1004.
  • Islam MK, Carter JP, Airey D (1998), Model simulation of uncemented and cemented calcareous sediments, Proceedings, The Geotechnics of Hard Soils - Soft Rocks, Napoli, Italy, 1, 561-569.
  • Itakura T, Airey D (1998), Laboratory studies of contaminant transport in soils at an industrial liquid waste depot in Sydney, Proceedings, Environmental Engineering in Australia: Opportunities and Challenges, Avoca Beach, NSW, 219-224.
  • Itakura T, Airey D, Leo CJ (1998), Determination of parameters for modelling the transport of organic compounds through clayey soils at Castlereagh, Western Sydney, Proceedings, Integrated Modelling of the Urban Environment, Kingswood, NSW, 150-157.
  • Jaafari A (1998), Perspectives on risks specific to large projects, Proceedings, National Infrastructure Strategy Symposium and Summit 98, Sydney, NSW, 1-21.
  • Jaafari A (1998), Project management of the EU's productivity initiative programme, Proceedings of the World Congress on Project Management, Ljubljana, Slovenia, 1, 1-3.
  • Jaafari A (1998), Project managers of the next millennium: do they resemble project managers of today?, Proceedings of the World Congress on Project Management, Ljubljana, Slovenia, 2, 1-10.
  • Jonaidi M, Ansourian P (1998), Behaviour of storage bins under harmonic edge settlement, Proceedings, 6th International Conference on Bulk Materials Storage, Handling and Transportation, Wollongong, NSW, 451-457.
  • Jonaidi M, Chaaya M, Ansourian P (1998), Cylindrical shells subjected to vertical edge deformation and internal pressure, Proceedings, Thin-Walled Structures: Research and Development, Singapore, Singapore, 613-620.
  • Jones ISF (1998), Classes of OCTS radiance spectra for the Pacific Ocean, The Third ADEOS Symposium Workshop, National Space Development Agency of Japan, 524.
  • Jones ISF, Ainsworth EJ (1998), Phytoplankton distributions at sites in the Pacific Ocean, Technical Report No 1 NASDA EORC, EORC, 26.
  • Jones ISF, Young HE (1998), Enhanced oceanic uptake of carbon dioxide - an AIJ Candidate, Proceedings, Technologies for Activities Implemented Jointly, Greenhouse Gas Mitigation, Vancouver, Canada, 267-272.
  • Kwok KCS, Isyumov N (1998), Aerodynamic measures to reduce the wind-induced response of buildings and structures, Proceedings, Structural Engineering World Wide, San Francisco, USA, CD T179-6-CD
  • Naghdy F, Samali B, Kwok KCS, Lam VUH (1998), Intelligent active control of wind excited structures, Proceedings, The Fourth International Conference on Motion and Vibration Control, Zurich, Switzerland, 3, 1195-1200.
  • Papangelis J, Trahair NS (1998), Computer design of steel structures according to AS 4100 and NZS 3404, Proceedings: Australasian Structural Engineering, Auckland, NZ,
    843-850.
  • Pi Y, Trahair NS (1998), Inelastic lateral buckling strength and design of steel arches, Proceedings, Lightweight Structures in Architecture, Engineering and Construction 98, Sydney, NSW, 1, 345-352.
  • Poulos HG (1998), The design of piles with particular reference to the Australian piling code, Symposium on Recent Developments in Piling Practice in Sydney, Sydney, NSW,
    1-21.
  • Poulos, HG (1998), A method for analyzing piled embankments, Proceedings, Thirteenth Southeast Asian Geotechnical Conference, Taipei, Taiwan, 551-556.
  • Rasmussen KJR (1998), Research on stainless steel tubular structures, Proceedings, Stainless Steel in Structures - An Experts Seminar, Sydney, NSW, 1, Section 4, 1-9.
  • Reid SG (1998), Experience with slip-block tests to assess the shear connection performance of profiled steel decking in composite slabs, Proceedings: Australasian Structural Engineering Conference, Auckland, NZ, 2, 205-212.
  • Reid SG (1998), Prototype load testing procedures for structural design, Proceedings, Structural Safety and Reliability, Kyoto, Japan, 573-580.
  • Reid SG (1998), Prototype load-testing procedures for probability-based limit states design, Proceedings, Structural Engineering World Wide Congress, San Francisco, USA, CD Paper T104-3.
  • Reid SG, Sedra S (1998), Interaction of creep, shrinkage and shrinkage-induced cracking of concrete, Proceedings, Fracture Mechanics of Concrete Structures, Gifu, Japan, 2,
    1377-1386.
  • Rogers C, Hancock GJ (1998), Bearing design of thin sheet steel screwed connections, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St Louis, Missouri, USA, 481-494.
  • Rogers C, Hancock GJ (1998), Behaviour of thin G550 sheet steel bolted connections, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St Louis, Missouri, USA, 521-547.
  • Rogers C, Hancock GJ (1998), Behaviour of thin G550 sheet steel screwed connections, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St Louis, Missouri, USA, 495-510.
  • Rogers C, Hancock GJ (1998), Ductile and connection behaviour of thin G550 sheet steels, Proceedings, Thin-Walled Structures: Research and Development, Singapore, Singapore, 145-152.
  • Rogers C, Hancock GJ (1998), Ductility measurements of thin G550 sheet steels, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, Rolla, Missouri, USA, 423-438.
  • Samali B, Kwok KCS (1998), Effectiveness of V-shaped tuned liquid column dampers in suppressing building motion induced by moderate earthquakes, Proceedings, Second World Conference on Structural Control, Kyoto, Japan, 3, 2431-2438.
  • Samali B, Kwok KCS, Facioni R (1998), A wind tunnel comparison of active and passive tuned mass dampers in controlling wind-induced vibrations of tall buildings, Proceedings, The Fourth International Conference on Motion and Vibration Control, Zurich, Switzerland, 2, 651-656.
  • Samali B, Kwok KCS, Facioni R (1998), Response of highrise buildings - Damper system to wind loads, Proceedings, 5th International Tall Building Conference, Hong Kong, Hong Kong, 1116-1123.
  • Samali B, Kwok KCS, Gao H (1998), Wind induced motion control of a 76 storey building by liquid dampers, Proceedings, Second World Conference on Structural Control, Kyoti, Japan, 1473-1480.
  • Small JC, Thorne C, Ta LD (1998), Effect of pore pressure dissipation on the behaviour of anchors in clay, The Proceedings of the Eighth International Offshore and Polar Engineering Conference, Montreal, Canada, 1, 497-504.
  • Sully RM, Hancock GJ (1998), The behaviour of cold-formed slender square hollow section beam columns, Proceedings, Tubular Structures VIII, Singapore, Singapore,
    445-454.
  • Teh LH, Clarke MJ (1998), Advanced analysis of steel frames composed of tubular sections - A preliminary case study, Proceedings, Fifth Pacific Structural Steel Conference, Seoul, Korea, 1, 277-282.
  • Teh LH, Clarke MJ (1998), 3-D Plastic-zone analysis of steel frames, Proceedings, Fifth Pacific Structural Steel Conference, Seoul, Korea, 1, 289-296.
  • Thepmongkorn S, Kwok KCS (1998), Load combination and response combination of wind-excited tall buildings and the effects of structural eccentricity, Session Proceedings, Australasian Wind Engineering Society: 7th Workshop on Wind Engineering, Auckland, New Zealand, 3.
  • Trahair NS, Pi Y, Papangelis J (1998), Design of Steel Arches, Proceedings, Thin-Walled Structures: Research and Development, Singapore, Singapore, 41-51.
  • Trahair NS, Pi Y, Put BM (1998), Buckling, torsion, and biaxial bending of cold-formed steel beams, Proceedings, Thin-Walled Structures: Research and Development, Singapore, Singapore, 121-127.
  • Trahair NS, Pi Y, Put BM (1998), Inelastic lateral buckling of cold-formed channel and
    Z-section beams, Proceedings, Thin-Walled Structures: Research and Development, Singapore, Singapore, 205-212.
  • Wheeler A, Clarke MJ, Hancock GJ, Murray M (1998), Design model for bolted moment end plate connections joining rectangular hollow sections, Proceedings, Tubular Structures VIII, Singapore, Singapore, 539-548.
  • Wheeler A, Clarke MJ, Hancock GJ (1998), Finite element modelling of bolted moment end plate connections in tubular members, Proceedings, Tubular Structures VIII, Singapore, Singapore, 549-558.
  • Wilkinson TJ, Hancock GJ (1998), Compact or class 1 limits for rectangular hollow sections in bending, Proceedings, Tubular Structures VIII, Singapore, Singapore, 409-416.
  • Wilkinson TJ, Hancock GJ (1998), Plastic design of cold-formed rectangular hollow sections, Proceedings, Fifth Pacific Structural Steel Conference, Seoul, Korea, 1, 49-55.
  • Wilkinson TJ, Hancock GJ (1998), Tests of bolted and internal sleeve knee connections in cold-formed RHS, Proceedings, Tubular Structures VIII, Singapore, Singapore, 187-195.
  • Wilkinson TJ, Hancock GJ (1998), Tests of portal frames in cold-formed RHS, Proceedings, Tubular Structures VIII, Singapore, Singapore, 521-529.
  • Wilkinson TJ, Hancock GJ (1998), Tests of stiffened and unstiffened welded knee connections in cold-formed RHS, Proceedings, Tubular Structures VIII, Singapore, Singapore, 177-186.
  • Wood G, Holmes J, Kwok KCS, Denoon R (1998), New techniques for determining structural response of large roofs due to wind loading, Proceedings: Australasian Structural Engineering, Auckland, NZ, 2, 1023-1028.
  • Wood GS, Kwok KCS (1998), An empirically derived estimate for the mean velocity profile of a thunderstorm downdraft, Australian Wind Engineering Society: Seventh Workshop on Wind Engineering, 1-4.
  • Yeoh CK, Airey D (1998), Drained cyclic response of an artificially cemented calcareous sand, Proceedings, The Geotechnics of Hard Soils - Soft Rocks, Napoli, Italy, 2, 935-942.
  • Young B, Hancock GJ (1998), Web crippling behaviour of cold-formed unlipped channels, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction Rolla, Missouri, USA, 127-150.
  • Young B, Rasmussen KJR (1998), Behaviour of locally buckled singly symmetric columns, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St. Louis, Missouri, USA, 219-238.
  • Young B, Rasmussen KJR (1998), Tests of cold-formed channel columns, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St Louis, Missouri, USA, 239-264.
  • Young B, Rasmussen KJR (1998), Shift of the effective centroid of channel columns, Proceedings, Recent Research and Developments in Cold-Formed Steel Design and Construction, St. Louis, Missouri, USA, 265-287.
  • Young B, Rasmussen KJR (1998), Design of fixed-ended cold-formed lipped channel columns, Proceedings, Sixth East Asia-Pacific Conference on Structural Engineering and Construction, Taipei, Taiwan, 2193-2198.
  • Young B, Rasmussen KJR (1998), Inelastic bifurcation analysis of locally buckled channel columns, Proceedings, Thin-walled Structures, Research and Development, Singapore, Singapore, 409-416.
  • Yu XB, Abel A (1998), Experimental and analytical studies on crack surface interference under multiaxial conditions, Proceedings of the Eighth International Offshore and Polar Engineering Conference, Montreal, Canada, 45-49.
  • Yuan HQ, Pi Y (1998), Effects of approximations o buckling and postbuckling analysis, Proceedings, LSA98 International Congress, Sydney, NSW, 1, 353-361.
  • Zhao XL, Cheah R, Lim P, Joseph P, Pi Y (1998), Rotational stiffness of oktalok nodal connections and member capacity with semi-rigid joints, Proceedings, Lightweight Structures in Architecture, Engineering and Construction 98, Sydney, NSW, 1, 322-331.
  • Zheng H, Abel A (1998), Tensile properties of TEMPCORE reinforcing steel, Proceedings, The Eighth International Offshore and Polar Engineering Conference, Montreal, Canada, IV, 138-141.
  • Zheng H, Abel, A (1998), Elasto-plastic transition in tempcore reinforcing steel, Proceedings, Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Germany, 373-378.
Back to Top