You are here: Civil Engineering / Research & Consulting / Publications / 1996-2000

2000 Publications

Books and Book Chapters | Journal Papers | Conference Papers
Research Reports | Higher Degree Theses

Books and Book Chapters

  • HG Poulos, Pile load test methods - applications and limitations, Libro Jomenaje a Jose Antonio Jimenez Salas, pp 101-109.
  • HG Poulos and JC Small, Development of design charts for concrete pavements and industrial grounds slabs, Design Applications of Raft Foundations, pp 39-70.
  • HG Poulos, Practical design procedures for piled raft foundations, Design Applications of Raft Foundations, pp 425-467.
Back to Top

Journal Papers

  • Davies PJ, Williamson M, Fraser H and Carter JP, The portable remotely operated drill, APPEA Journal, pp 522-530.
  • Jaafari Ali and Manivong K, A synthesis of a model for life cycle project management, Journal of Computer Aided Civil and Infrastructure Engineering, Vol. 15, pp 26 - 38.
  • Jaafari Ali, Construction business competitiveness and global benchmarking, Journal of Management in Engineering, Vol. 16 (6), pp 43 - 53.
  • Liu MD and Carter JP, Modelling the destructuring of soils during virgin compression, Géotechnique, Vol. 50 (4), pp 479-483.
  • Liu MD and Carter JP, On the volumetric behaviour of reconstituted soils, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp 101-133.
  • Liu MD, Carter JP, Desai CS and Xu KJ, Analysis of the compression behaviour of structured soils using the disturbed state concept, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp 723-735.
  • Liyanapathirana DS, Applications of stress smoothing methods to a finite element pile driving analysis, Engineering Computations, Vol. 17 ( 3), pp 218-234.
  • Liyanapathirana DS, Deeks AJ and Randolph MR, Numerical modelling of large deformations associated with driving of open-ended piles, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp 1079-1101.
  • Loganathan S and Poulos HG, Centrifuge model testing of tunnelling-induced ground and pile deformations, Geotechnique, Vol. 50 (3), pp 283-294.
  • Ng AKL and Small JC, Use of coupled finite element analysis in unsaturated soil problems, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp 73-94.
  • Pi YL and Trahair NS, Distortion and warping at beam supports, Journal of Structural Engineering, Vol. 126 (11), pp 1279-1287.
  • Pi YL and Trahair NS, Inelastic lateral buckling strength and design of steel arches, Engineering Structures, Vol. 22, pp 993-1005.
  • Poulos HG, Some aspects of pile skin friction in calcareous sediments, Engineering for Calcareous Sediments, Vol. 2, pp 457-471.
  • Rasmussen KJR and Rondal J, Strength curves for aluminium alloy columns, Engineering Structures, Vol. 22, pp 1505-1517.
  • Rasmussen KJR and Hancock GJ, Buckling analysis of thin-walled structures: Numerical developments and applications, Progress in Structural Engineering and Materials, Vol. 2, pp 359-368.
  • Rasmussen KJR and Rondal J, Column curves for stainless steel alloys, Journal of Constructional Steel Research, Vol. 54, pp 89-107.
  • Rasmussen KJR, Recent research on stainless steel tubular structures, Journal of Constructional Steel Research, Vol. 54, pp 75-88.
  • Reid SG, Acceptable risk criteria, Progress in Structural Engineering and Materials, Vol. 2 (2), Wiley, pp 254-262.
  • Rogers CA and Hancock GJ, Failure modes of bolted-sheet-steel connections loaded in shear, Journal of Structural Engineering, Vol. 126 (3), pp 288-296.
  • Small JC and Zhang H, Analysis of capped pile groups subjected to horizontal and vertical loads, Computers and Geotechnics, Vol. 26 (1), pp 1-21.
  • Taiebat H and Carter JP, A semi-empirical method for the liquefaction analysis of offshore foundations, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24, pp 991-1011.
  • Taiebat H and Carter JP, Numerical studies of the bearing capacity of shallow foundations on cohesive soil subjected to combined loading, Géotechnique, Vol. 50 (4), pp 409-418.
  • Teh L and Clarke M, Closure to discussion on symmetry of tangent stiffness matrices of 3D elastic frame, Journal of Engineering Mechanics, Vol. 125, pp 663-664.
  • Wheeler AT, Clarke MJ and Hancock GJ, FE Modelling of four-bolt, tubular moment end-plate connections, Journal of Structural Engineering, Vol. 126 (7), pp 816-822.
  • Wilkinson T and Hancock GJ, Tests to examine plastic behaviour of knee joints in cold-formed RHS, Journal of Structural Engineering, Vol. 126 (3), pp 297-305.
  • Xu KJ and Poulos HG, General elastic analysis of piles and pile groups, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 24,
    pp 1109-1138.
  • Xu KJ and Poulos HG, Measurement and practical axial response of piles with diameter discontinuities, Geotechnical Engineering, Vol. 31 (3), pp 171-191.
  • Young B and Rasmussen KJR, Inelastic bifurcation of cold-formed singly symmetric columns, Thin-walled Structures, Vol. 36, pp 213-230.
  • Yu X and Abel A, Crack surface interference under cyclic mode I and steady mode II loading. Part I: Experimental study, Engineering Fracture Mechanics, Vol. 66, pp 503-518.
  • Yu X and Abel A, Crack surface interference under cyclic mode I and steady mode II loading. Part II: Modelling analysis, Engineering Fracture Mechanics, Vol. 66, pp 519-535.
  • Yu X and Abel A, Mixed-mode crack surface interference under cyclic shear loads, Fatigue & Fracture of Engineering Materials & Structures, Vol. 23, pp 151-158.
  • Zhang H and Small JC, Analysis of capped pile groups subjected to horizontal and vertical loads, Computers and Geotechnics, Vol. 26 (1), pp 1-21.
  • Zheng X, Booker JR and Carter JP, Limit analysis of the bearing capacity of fissured materials, International Journal of Solids and Structures, Vol. 37 (8), pp 1211-1243.
  • Zhou Y, Small JC and Leo CJ, Behavior of EPS Geofoam as flexible pavement subgrade material in model tests, Geosynthetics International, Vol. 7 (1), pp 1-22.
Back to Top

Conference Papers

  • Airey DW, Itakura Takashi and Abbas Elzein, 'Boundary Element Modeling of Contaminant Migration at Castlereagh Landfill Site: Numerical and Analytical Modelling of Contaminant Migration in Soils', John Booker Memorial Symposium, University of Sydney, November 2000, Sydney, Australia, (2000).
  • Ansourian P, Design of large-scale steel corrugated silos, Proceedings, 14th International Congress of Chemical and Process Engineering, Prague, Czech Republic, F1.1, pp 1-9.
  • Carter JP, Desai CS, Potts DM, Schweiger HF and Sloan SW, Computing and computer modelling in Geotechnical Engineering, Proceedings, GeoEng 2000, Melbourne, Australia, Vol. 1, pp 1157-1252.
  • Chaaya M and Jaafari, A Collaboration and integration of project life cycle design information using IT systems. Proceedings, International Conference on Construction Information Technology, INCITE 2000, Hong Kong, pp 277-291.
  • Chaaya M and Jaafari A, Managing information within a globally integrated project environment, Proceedings, 15th World congress on project management, London, UK.
  • Chen LT, Poulos HG and Loganathan M, Approximate design charts for piles adjacent to tunneling operations, Proceedings, GeoEng 2000, Melbourne, Australia, CD volume.
  • Clarke MJ and Hancock GJ, Purlin design to AISI LRFD using rational buckling analysis, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 457-470.
  • Cunha RP, Small JC and Poulos HG, Class ‘C’ analysis of a piled raft case history in Gothenburg, Sweden, Developments in Geotechnical Engineering, Bangkok, Vol. 1, pp 271-280.
  • Cunha RP, Small JC and Poulos HG, Parametric analysis of a piled raft case history in Uppsala, Sweden, Proceedings, Fourth Brazilian Seminar on Special Foundation Engineering and Geotechnics - SEFE IV, São Paulo, Brazil, Vol. 2, pp 380-390.
  • Deng W and Carter JP, A Theoretical Study of the Vertical Uplift Capacity of Suction Caissons, Proceedings of the Tenth (2000) International Offshore and Polar Engineering Conference, Seattle, USA, Vol. II, pp 342-349.
  • Deng W, Inclined uplift capacity of suction caissons in sand, Proceedings, 2000 Offshore Technology Conference, Houston, USA.
  • Doloi H and Jaafari A, Application of simulation tool for strategic decision evaluation for life cycle project management, Proceedings, 17th International Symposium on Automation and Robotics in Construction, ISARC 2000, Taipei, Taiwan, pp 739-744.
  • Doloi H and Jaafari A, Synthesis of an integrated project level process simulation model for life cycle project management, Proceedings, PMI Conference 2000, Christchurch, New Zealand.
  • Doloi H, and Jaafari A, Integrated process simulation modeling system - A proactive decision tool for life cycle project management, Proceedings, Third European Conference on Product and Process Modelling in the Building and Related Industries, ECPPM 2000, Lisbon, Portugal.
  • Elzein AH (2000), 'Heat Sources in Non-Homogeneous Rock Media by Boundary Elements', GeoEng 2000, November 2000, Melbourne, Australia, (2000).
  • Elzein AH (2000), 'A three-dimensional model of uncoupled transient thermo-elasticity in non-homogeneous media', John Booker Memorial Symposium, University of Sydney, November 2000, Sydney, Australia, (2000).
  • Enright J, Harris R and Hancock GJ, Structural stability of braced scaffolding and formwork with Spigot joints, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 357-376.
  • Gupta V, Poulos H.G, and Reid SG, Seismic Micro-Zonation of Delhi, Proceedings of GeoEng2000, Melbourne, Australia, Paper GEE 0241, Lancaster, USA.
  • Hancock GJ, Wilkinson T and Teh L, Welded connections in high strength cold-formed steels, Proceedings, 4th International Conference on Connections in Steel Structures, Roanoke, USA.
  • Hancock GJ, Zhao XL and Wilkinson T, Future directions in cold-formed tubular structures, Proceedings, The Paul Grundy Symposium, Melbourne, Australia,
    pp 17-24.
  • Jaafari A, Manivong KK and Chaaya M, The story of VIRCON in simulating and teaching professional construction management, Proceedings, INCITE 2000: Implementing IT to Obtain a Competitive Advantage in the 21st Century, Hong Kong, pp. 515-532.
  • Jonaidi M and Ansourian P, Buckling behaviour of closed and open top cylindrical shells subjected to meridional edge deformation, Proceedings of the Third International Conference on Coupled Instabilities in Metal Structures CIMS’2000, Lisbon, Portugal, pp 411-418.
  • Loganathan N, Poulos HG and Bustos-Ramirez A, Estimation of ground loss during tunnel excavation, Geo Eng 2000, Melbourne, Australia, CD volume.
  • Manivong KK and Chaaya M, Life cycle project management: A strategic alliance approach, Proceedings, The International Research Network on Organising by Projects, IRNOP IV, Sydney, Australia.
  • Manivong KK and Jaafari A, A life cycle project management model for global collaboration.” INCITE 200, Proceedings, Implementing IT to Obtain a Competitive Advantage in the 21st Century, Hong Kong, pp. 155-175.
  • Popovic D, Hancock GJ and Rasmussen KJR, Compression tests on cold-formed angles loaded parallel with a leg, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, 255-279.
  • Poulos HG, Pile testing - from the designer's viewpoint, Proceedings of the Second International Stanamic Seminar, Tokyo, Japan, pp 3-21.
  • Poulos HG, Pile-raft interaction - alternative methods of analysis, Proceedings of the Booker Memorial Symposium, Sydney, Australia, pp 445-463.
  • Poulos HG, The pile - enhanced raft an economical foundation system, Proceedings, 11th Brazilian Congress on Soil Mechanics and Geotechnical Engineering, Brazil, Vol. 4, 27-43.
  • Rasmussen KJR and Young B, Coupling in the bifurcation of locally buckled fixed-ended columns, Proceeding of the 3rd International Conference on Coupled Instabilities in Metal Structures, Lisbon, Portugal, 153-161.
  • Rasmussen KJR, Overall bifurcation of locally buckled point-symmetric columns, Proceeding of the 3rd International Conference on Coupled Instabilities in Metal Structures, Lisbon, Portugal, 163-169.
  • Rasmussen KJR, Experimental techniques in the testing of thin-walled structural members, Proceeding of the 3rd International Conference on Coupled Instabilities in Metal Structures, Lisbon, Portugal, 225-239.
  • Rasmussen KJR, The development of an Australian Standard for stainless steel structures, Proceedings of the 15th International Conference on Cold-formed Steel Structures, St Louis, USA, 659-671.
  • Reid S, Load-testing for design of structures with Weibull-distributed strengths, Proceedings of the ICASP 8 Conference Applications of Statistics and Probability,pp 705-712.
  • Reid SG, Model errors in the failure prediction model of glass strength, Proceedings, Eighth ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, USA, pp 89.
  • Reid SG, Reliability-based design strengths based on prototype testing of small samples, Proceedings, Engineering Foundation Conference on Composite Construction in Steel and Concrete IV (CCIV), Banff, Canada, NSF Symposium - Session 2, United Engineering Foundation, Vol. 2, pp 1-12.
  • Rogers CA and Hancock GJ, Tensile fracture behaviour of thin G550 sheet steels, Proceedings of the Seventh International Symposium on Structural Failure and Plasticity (IMPLAST 2000), Australia, pp 699-704.
  • Sales MM, Cunha RP, Farias MM, Small JC and Poulos HG, Comparisons of some programs for analysing piled raft problems, Proceedings, Developments in Geotechnical Engineering, Bangkok, Vol. 1, pp 317-326.
  • Small JC and Zhang HH, Piled raft foundations subjected to general loadings, Proceedings of the Booker Memorial Symposium, Developments in Theoretical Geomechanics, Sydney, NSW, pp 431-445.
  • Teh LH, Hancock GJ and Clarke MJ, Spatial buckling behaviour of high-rise rack frames, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 335-355.
  • Teh, L. H., and Clarke, M. J. (2000) "A different type of conservative couple- Thinking outside the box," Proc., 14th Engineering Mechanics Conference, 21-24 May 2000, Austin, Texas, U.S.A (in CD-ROM).
  • Teh, L. H., and Hancock, G. J. (2000) "Fillet welded connections in G450 sheet steels," Proc., 48th Annual Conference of the Welding Technology Institute of Australia, Paper No. 36, 31 October-3 November 2000, Melbourne, Australia.
  • Wang CX and Carter JP, Penetration of strip and circular footings into layered clays, Proceedings of the John Booker Memorial Symposium, Advances in Theoretical Geomechanics, Sydney, Australia, pp 215-232.
  • Wilkinson T and Hancock GJ, Effect of GMAW on the mechanical properties of in-line galvanised cold-formed steel, Proceedings, IIW and WTIA 48th Annual Conference, Melbourne, Australia.
  • Xu KJ and Poulos HG, Theoretical study of pile behaviour induced by a soil cut, Proceedings, GeoEng 2000, CD volume.
  • Young B and Hancock GJ, Tests and design of cold-formed unlipped channels subjected to web crippling, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 43-70.
  • Young B and Hancock GJ, Web crippling behaviour of channels with flanges restrained, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 91-104.
  • Young B and Hancock GJ, Experimental investigation of cold-formed channels subjected to combined bending and web crippling, Proceedings, 15th International Specialty Conference in Cold-Formed Steel Design and Construction, St Louis, USA, pp 71-90.
  • Yu X and Abel A, Fatigue crack growth in notched thin-walled tubes under non-proportional mixed mode loads, Proceedings of the Tenth (2000) International Offshore and Polar Engineering Conference, Seattle, USA, Vol. 4, pp 23-28.
Back to Top