Emeritus Professor Geoffrey Barton

School of Chemical and Biomolecular Engineering

J01 - Chemical Engineering Building
The University of Sydney

Telephone +61 2 9351 3780
Fax +61 2 9351 2854

Website School of Chemical and Biomolecular Engineering

Teaching and supervision

CHNG5005 - Wastewater Eng - Systems and Practice

CHNG5706 - Foundations of Materials Purification and Recovery

Selected grants

2014

  • It's a fine line: analytical and experimental optimisation of drawing metal-in-dielectric nanowire composites to manufacture engineered metamaterials; Fleming S, Barton G; Australian Research Council (ARC)/Discovery Projects (DP).
  • Making the most of every opportunity: Innovative solutions for the Australian food industry in the 21st century.; Raubenheimer D, Dehghani F, Kavanagh J, Barton G, Langrish T, Gomes V, Fletcher D, Abbas A, Downard K, Dong Q, Chae S, McConchie R, Copeland L, Phan-Thien K, Arab-Tehrany E, Regtop H, Lang T, Ryan D, Wright G, Ling L, Cuthbertson A, Heatley R, Adil Q, Challacombe B, Simonetta M, Norman K; Australian Research Council (ARC)/Industrial Transformation Training Centres (ITTC).

2012

  • A Coupled Finite Volume Method for Viscoelastic Flow Problems on Highly-Skewed Unstructured Meshes: A Computational Rheology Revolution; Barton G; Australian Research Council (ARC)/Discovery Projects (DP).
  • Yield improvement in large - scale bubble column fermenters; Barton G, Kavanagh J, Fletcher D, Balzan T; Australian Research Council (ARC)/Linkage Projects (LP).

2010

  • Measurement and Prevention of Membrane Fouling for Water Reuse in Biorefineries; O'Cleirigh C, Ryan D, Coster H, Ryan D, O'Cleirigh C, Barton G, Ryan D, Dzurak A, Kavanagh J; Australian Research Council (ARC)/Linkage Projects (LP).

2009

  • Numerically Robust Extruder Die Design for Fabricating High-Quality Preforms for Microstructured Polymer Optical Fibres; Barton G, Fan X; Australian Research Council (ARC)/Discovery Projects (DP).

2008

  • High Resolution Field Emission Scanning Electron Microscopy (FESEM) Platform for Characterisation at; Ringer S, Barton G, Ramzan I, Copeland L, Potts D, Braet F, Grillet C, Lay P, Murphy C, Cairney J, Ferry M, Eggleton B, McKenzie D, Masters A, Parker A, Overall R, Weiss A, Ruys A, Sorrell C, Ye L, Harris A, Ranzi G; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).
  • Extruder Die Design for Large-Scale Production of Microstructured Polymer Optical Fibres; Barton G; University of Sydney/Bridging Support.
  • High-Resolution Field Emission Scanning Electron Microscopy (FESEM) Platform for Characterisation at the Nanometre-Level; Cairney J, Ringer S, Braet F, Ferry M, Sorrell C, Ye L, Ruys A, Barton G, Harris A, Ranzi G, Eggleton B, Grillet C, Mckenzie D, Lay P, Masters A, Parker A, Overall R, Weiss A, Murphy C, Ramzan I, Copeland L, Potts D; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).

2007

  • Extruder Die Design: The Missing-Link in the Large-Scale Production of Microstructured Polymer Optical Fibres; Barton G; University of Sydney/Bridging Support.

2006

  • Linkage 2005 Round Two " Electrocoagulation as a low-cost option for the continuous treatment of hi; Ryan D, Gadd A, Barton G; AB Mauri Technology & Development Pty Limited/Project Support.
  • Electrocoagulation as a low-cost option for the continuous treatment of highly polluted wastewater; Barton G, Ryan D, Black G; Australian Research Council (ARC)/Linkage Projects (LP).
  • Tailoring the functionality of microstructured polymer optical fibres; Van Eijkelenborg M, Barton G; Australian Research Council (ARC)/Discovery Projects (DP).

2004

  • ARC Linkage 2003 - LP 0348533"Microstructured polymer interconnects for photonic devices"; Barton G, Poladian L, Van Eijkelenborg M; Bandwidth Foundry P/L/Project Support.
  • Fine structured optical fibre fabrication - soot rheology & nanostructure in modified chemical vapour deposition; Fleming S, Ringer S, McNamara P, Barton G; Australian Research Council (ARC)/Discovery Projects (DP).
  • Microstructured polymer interconnnects for photonic devices; Van Eijkelenborg M, Poladian L, Barton G, Mann I, Ladouceur F, Ladouceur F; Australian Research Council (ARC)/Linkage Projects (LP).
  • Developing a strategy for the international commercialisation of micro-structured polmer optical fibres; Barton G; DEST/Innovation Access Program.

2003

  • Linkage 2003 Production of Optimal Microstructured Polymer Optical Fibre LP0347745; Barton G, Tanner R, Poladian L, Large M; Cactus Fibre/Project Support.
  • Production of optimal microstructured polymer optical fibre; Barton G, Tanner R, Large M, Poladian L; Australian Research Council (ARC)/Linkage Projects (LP).

2002

  • An Integrated Framework for Optimisation and Control of Key Product Properties in Emulsion Polymeris; Barton G, Gomes V, Romagnoli J; Australian Research Council (ARC)/Discovery Projects (DP).

2000

  • Research Production of fertilizers from waste using biotechnology agreement between Brightstar Environmental Partnership and The University of Sydney; Kollaras A, Murray C, Steele J, Barton G; Brightstar Environmental Partnership/BLO Project.

Selected publications

Download citations: PDF RTF Endnote

Books

  • Large, M., Poladian, L., Barton, G., Van Eijkelenborg, M. (2008). Microstructured Polymer Optical Fibres. New York, US: Springer.

Book Chapters

  • Wong, C., Barton, G., Barford, J. (2003). The Nitrogen Cycle and its Application in Wastewater Treatment. In Duncan Mara, Nigel J. Horan (Eds.), The Handbook of Water and Wastewater Microbiology, (pp. 427-439). The Netherlands: Academic Press Elsevier.
  • Dun, T., Barton, G., Brace, A. (2001). Towards a Central Interest Rate Model. In E Jouini, J Cvitanic & M Musiela (Eds.), Option Pricing, Interest Rates and Risk Management, (pp. 278-313). United Kingdom: Sage Publications.

Journals

  • McClure, D., Deligny, J., Kavanagh, J., Fletcher, D., Barton, G. (2014). Impact of Surfactant Chemistry on Bubble Column Systems. Chemical Engineering and Technology, 37(4), 652-658. [More Information]
  • Xue, S., Barton, G. (2013). A finite volume formulation for transient convection and diffusion equations with unstructured distorted grids and its applications in fluid flow simulations with a collocated variable arrangement. Computer Methods in Applied Mechanics and Engineering, 253, 146-159. [More Information]
  • Handelsman, T., Nguyen, T., Vukas, M., Barton, G., Coster, H., Roddick, F., Kavanagh, J. (2013). Characterisation of foulants in membrane filtration of biorefinery effluents. Desalination and Water Treatment, 51(7-9), 1563-1570. [More Information]
  • McClure, D., Kavanagh, J., Fletcher, D., Barton, G. (2013). Development of a CFD model of bubble column bioreactors: Part one - A detailed experimental study. Chemical Engineering and Technology, 36(12), 2065-2070. [More Information]
  • Cen, J., Kavanagh, J., Coster, H., Barton, G. (2013). Fouling of reverse osmosis membranes by cane molasses fermentation wastewater: detection by electrical impedance spectroscopy techniques. Desalination and Water Treatment, 51(4-6), 969-975. [More Information]
  • Walker, T., Xue, S., Barton, G. (2012). A robust Monte Carlo based ray-tracing approach for the calculation of view factors in arbitrary three-dimensional geometries. Computational Thermal Sciences, 4(5), 425-442. [More Information]
  • Xue, S., Barton, G. (2012). Implementation of boundary conditions and global mass conservation in pressure-based finite volume method on unstructured grids for fluid flow and heat transfer simulations. International Journal of Heat and Mass Transfer, 55(19-20), 5233-5243. [More Information]
  • Handelsman, T., Kavanagh, J., Coster, H., Barton, G. (2011). Zero Discharge Fermentation Plant Design. Desalination and Water Treatment, 34(1-3), 389-393. [More Information]
  • Cheung, C., Fletcher, D., Barton, G. (2010). A computational fluid dynamics model for co-deposition of silica and germania in the MCVD process. Journal of Non-Crystalline Solids, 356(1), 24-31. [More Information]
  • Gadd, A., Ryan, D., Kavanagh, J., Barton, G. (2010). Design development of an electrocoagulation reactor for molasses process wastewater treatment. Water Science and Technology, 61(12), 3221-3227. [More Information]
  • Gadd, A., Ryan, D., Kavanagh, J., Beaurain, A., Luxem, S., Barton, G. (2010). Electrocoagulation of fermentation wastewater by low carbon steel (Fe) and 5005 aluminium (Al) electrodes. Journal of Applied Electrochemistry, 40(8), 1511-1517. [More Information]
  • Walker, T., Xue, S., Barton, G. (2010). Numerical Determination of Radiative View Factors Using Ray Tracing. Journal of Heat Transfer, 132(7), 072702-1-072702-6. [More Information]
  • Yu, H., Leon-Saval, S., Argyros, A., Barton, G. (2010). Temperature effects on emission of quantum dots embedded in polymethylmethacrylate. Applied Optics, 49(15), 2749-2752.
  • Yu, H., Argyros, A., Leon-Saval, S., Fuerbach, A., Efimov, A., Barton, G. (2009). Emission properties of quantum dots in polymer optical fibres. Optics Express, 17(24), 21344-21349.
  • Cheung, C., Fletcher, D., Barton, G. (2009). Impact of chlorine dissociation for modified chemical vapor deposition. Journal of Non-Crystalline Solids, 355(13), 817-820. [More Information]
  • Haley, D., Petersen, T., Barton, G., Ringer, S. (2009). Influence of Field Evaporation on Radial Distribution Functions in Atom Probe Tomography. Philosophical Magazine (London, 2003), 89(11), 925-943.
  • Ryan, D., Gadd, A., Kavanagh, J., Barton, G. (2009). Integrated biorefinery wastewater design. Chemical Engineering Research and Design, 87(9), 1261-1268. [More Information]
  • Cheung, C., Fletcher, D., Barton, G., McNamara, P. (2009). Simulation of particle transport and deposition in the modified chemical vapor deposition process. Journal of Non-Crystalline Solids, 355, 327-334. [More Information]
  • Ryan, D., Gadd, A., Kavanagh, J., Zhou, M., Barton, G. (2008). A comparison of coagulant dosing options for the remediation of molasses process water. Separation and Purification Technology, (58), 347-352.
  • Norton, C., Cameron, I., Crosthwaite, C., Balliu, N., Tade, M., Shallcross, D., Hoadley, A., Barton, G., Kavanagh, J. (2008). Development and deployment of an immersive learning environment for enhancing process systems engineering concepts. Education for Chemical Engineers, 3, e75-e83.
  • Yu, H., Van Eijkelenborg, M., Leon-Saval, S., Argyros, A., Barton, G. (2008). Enhanced magneto-optical effect in cobalt nanoparticle-doped optical fiber. Applied Optics, 47(35), 6497-6501.
  • Cheung, C., McNamara, P., Barton, G., Liu, Z. (2008). Germania nanocrystals in Modified Chemical Vapour Deposition. Journal of Non-Crystalline Solids, 354, 3958-3964. [More Information]
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2008). Multiple solution-doping in optical fibre fabrication I - Aluminium doping. Journal of Non-Crystalline Solids, 354, 927-937. [More Information]
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2008). Multiple solution-doping in optical fibre fabrication II - Rare-earth and aluminium co-doping. Journal of Non-Crystalline Solids, 354, 1582-1590. [More Information]
  • Lwin, R., Barton, G., Harvey, L., Harvey, J., Hirst, D., Manos, S., Large, M., Poladian, L., Bachmann, A., Poisel, H., et al (2007). Beyond the bandwidth-length product: Graded Index Microstructured Polymer Optical Fiber. Applied Physics Letters, 91(19), 191119-1-191119-3.
  • Zhou, M., Yu, Q., Lei, L., Barton, G. (2007). Electro-Fenton method for the removal of methyl red in an efficient electrochemical system. Separation and Purification Technology, 57(2), 380-387.
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2007). Microscale inhomogeneities in aluminum solution-doping of silica-based optical fibers. Journal of the American Ceramic Society, 90(1), 23-28.
  • Kavanagh, J., Barton, G. (2007). Productivity improvement of recombinant Escherichia coli fermentation via robust optimization. Bioprocess and Biosystems Engineering, 31(2), 137-143.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Quantum dot and silica nanoparticle doped polymer optical fibers. Optics Express, 15(16), 9989-9994.
  • Xue, S., Poladian, L., Barton, G., Large, M. (2007). Radiative Heat Transfer in Preforms for Microstructured Optical Fibres. International Journal of Heat and Mass Transfer, 50(7-8), 1569-1576. [More Information]
  • Cheung, C., Haley, D., Fletcher, D., Barton, G., McNamara, P. (2007). Simulation of particle-vortex interactions in the modified chemical vapor deposition process. Journal of Non-Crystalline Solids, 353(44-46), 4046-4075.
  • Xue, S., Van Eijkelenborg, M., Barton, G., Hambley, P. (2007). Theoretical, numerical, and experimental analysis of optical fiber tapering. Journal of Lightwave Technology, 25(5), 1169-1176.
  • Xue, S., Lwin, R., Barton, G., Poladian, L., Large, M. (2007). Transient Heating of PMMA Preforms for Microstructured Optical Fibres. Journal of Lightwave Technology, 25(5), 1177-1183.
  • Gomes, V., Barton, G., Petrie, J., Romagnoli, J., Holt, P., Abbas, A., Cohen, B., Harris, A., Haynes, B., Langrish, T., Orellana, J., See, H., Valix, M., White, D. (2006). Chemical Engineering Curriculum renewal. Education for Chemical Engineers, 1(1), 116-125.
  • Law, S., Van Eijkelenborg, M., Barton, G., Yan, C., Lwin, R., Gan, J. (2006). Cleaved end-face quality of microstructured polymer optical fibres. Optics Communications, 265(2), 513-520.
  • Law, S., Harvey, J., Krukhlak, R., Song, M., Wu, E., Barton, G., Van Eijkelenborg, M., Large, M. (2006). Cleaving microstructured polymer optical fibres. Optics Communications, 258(2), 193-202.
  • Large, M., Argyros, A., Cox, F., Van Eijkelenborg, M., Ponrathnam, S., Pujari, N., Bassett, I., Lwin, R., Barton, G. (2006). Microstructured Polymer Optical Fibres: New Opportunities and Challenges. Molecular Crystals and Liquid Crystals, 446, 219-231.
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2006). Nanoscale characterization of silica soots and aluminium solution doping in optical fibre fabrication. Journal of Non-Crystalline Solids, 352(36-37), 3799-3807. [More Information]
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266.
  • Barton, G., Law, S., Phan, T. (2005). Limitations to the Manufacture of Specialty Optical Fiber. Journal of Manufacturing Science and Engineering, 127(3), 663-669.
  • Barton, G., Forrester, K., Bradstock, K., Gottlieb, D., Foster, A. (2005). Optimizing bioreactor productivity for therapeutic immune cells. Food and Bioproducts Processing, 83(C2), 158-163.
  • Holt, P., Barton, G., Mitchell, C. (2005). The future for electrocoagulation as a localised water treatment technology. Chemosphere, 59(3), 355-367. [More Information]
  • Law, S., Barton, G., Phan, T., Barton, M. (2005). The interpretation of online measurements of optical fibre diameter. Transactions of the Institute of Measurement and Control, 27(3), 215-229.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Large, M., Henry, G., Issa, N., Klein, K., Poisel, H., Pok, W., Poladian, L., Manos, S., Zagari, J. (2004). Bandwidth and loss measurements of graded-index microstructured polymer optical fibre. Electronics Letters, 40(10), 592-593.
  • Barton, G., Van Eijkelenborg, M., Henry, G., Large, M., Zagari, J. (2004). Fabrication of microstructured polymer optical fibres. Optical Fiber Technology, 10(4), 325-335.
  • Lyytikainen, K., Zagari, J., Barton, G., Canning, J. (2004). Heat transfer within a microstructured polymer optical fibre preform. Modelling and Simulation in Materials Science and Engineering, 12(3), S255-S265.
  • Foster, A., Forrester, K., Gottlieb, D., Barton, G., Romagnoli, J., Bradstock, K. (2004). Large-Scale Expansion Of Cytomegalovirus-Specific Cytotoxic T Cells In Suspension Culture. Biotechnology and Bioengineering, 85(2), 138-146. [More Information]
  • Zagari, J., Argyros, A., Issa, N., Barton, G., Henry, G., Large, M., Poladian, L., Van Eijkelenborg, M. (2004). Small-Core Single-Mode Microstructured Polymer Optical Fiber with Large External Diameter. Optics Letters, 29(8), 818-820.
  • Foster, A., Gottlieb, D., Marangolo, M., Bartlett, A., Li, Y., Barton, G., Romagnoli, J., Bradstock, K. (2003). Rapid, Large-Scale Generation of Highly Pure Cytomegalovirus-Specific Cytotoxic T Cells for Adoptive Immunotherapy. Stem Cells and Development, 12(1), 93-105.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Fellew, M., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L., Zagari, J. (2003). Recent progress in microstructured polymer optical fibre fabrication and characterisation. Optical Fiber Technology, 9(4), 199-209.
  • Holt, P., Barton, G., Wark, M., Mitchell, C. (2002). A quantitative comparison between chemical dosing and electrocoagulation. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 211(2-3), 233-248.
  • Zeaiter, J., Gomes, V., Romagnoli, J., Barton, G. (2002). Inferential conversion monitoring and control in emulsion polymerisation through calorimetric measurements. Chemical Engineering Journal, 89(1-3), 37-45.
  • Holt, P., Barton, G., Mitchell,, C. (2002). Mathematical analysis of a batch electrocoagulation. Water Science and Technology: Water Supply, 2(5-6), 65-71.
  • Zeaiter, J., Romagnoli, J., Barton, G., Gomes, V., Hawkett, B., Gilbert, R. (2002). Operation of semi-batch emulsion polymerisation reactors: Modelling, validation and effect of operating conditions. Chemical Engineering Journal, , 2955-2969.
  • Galan Domingo, O., Barton, G., Romagnoli, J. (2002). Robust control of a SAG mill. Powder Technology, 124(3), 264-271.
  • Zeaiter, J., Bakhtazad, A., Romagnoli, J., Barton, G., Gomes, V. (2002). The role of wave-net models in emulsion polymerisation. Powder Technology, 124(3), 212-218.
  • Barton, G., Marlin, T., Brisk, M., Perkins, J. (2001). Experiences from an industry-university study on control benefits. Pulp and Paper-Canada, 4.2527777778, 34-37.
  • Barton, G., Dun, T., Schlogl,, E. (2001). Simulated Swaption Delta-Hedging in the lognormal forward libor model. International Journal of Theoretical and Applied Finance, 4 No 4, 677-709.
  • Barton, G., Di, M. (2001). The economic assessment of process control quality using a Taguchi-based method. Journal of Process Control, 11, 81-88.

Conferences

  • Xue, S., Barton, G. (2013). Incompressible flow simulations without explicit boundary conditions at any open boundary. 11th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2013), Rhodes, Greece: American Institute of Physics (AIP). [More Information]
  • Xue, S., Barton, G., Fan, X. (2011). A Finite Volume Formulation with Unstructured Distorted Grids for Fluid Flow and Heat Transfer. 2011 World Congress on Engineering and Technology, Beijing: (IEEE) Institute of Electrical and Electronics Engineers.
  • Walker, T., Xue, S., Barton, G. (2010). Numerical Determination of Radiative View Factors. Chemeca 2010, Canberra: RMIT Publishing.
  • Yu, H., Argyros, A., Leon-Saval, S., Barton, G. (2009). Characterisation of quantum dot photoluminescence in polymer optical fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Barton, G., Kenny, D. (2009). Religion and spirituality in Adolescents. 3rd Australian Conference on Spirituality and Health 2009, Australia: Spirituality & Health Conference Australia Inc.
  • Gadd, A., Ryan, D., Kavanagh, J., Barton, G. (2008). Design development of an electrocoagulation reactor for molasses process wastewater treatment. conference on industrial water treatment systems, Amsterdam: International Water Association Publishing.
  • Yu, H., Argyros, A., Barton, G., Leon-Saval, S., Van Eijkelenborg, M. (2008). Enhancing the Verdet constant in polymer optical fibre by doping with magnetic nanoparticles. The 17th International Conference on Plastic Optical Fibers (POF2008), Brighton, MA, USA: IGI Publishing.
  • Yu, H., Argyros, A., Barton, G., Leon-Saval, S., Van Eijkelenborg, M. (2008). Magneto-optical effect in cobalt nanoparticle doped polymer optical material. OECC/ACOFT 2008 Conference, Sydney: (IEEE) Institute of Electrical and Electronics Engineers.
  • Cheung, C., Fletcher, D., Barton, G., McNamara, P. (2008). Numerical Simulation of silica deposition in the Modified Chemical Vapour Deposition Process. CHT-08 : Advances in Computation Heat Transfer, 50 Cross Highway; Redding, CT 06896-2404, USA: Begell House Inc.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Nanoparticle-Doped Microstructured Polymer Optical Fibre. 33rd European Conference and Exhibition on Optical Communication.
  • Norton, C., Cameron, I., Balliu, N., Shallcross, D., Barton, G., Kavanagh, J. (2007). Pedagogic Principles for an Immersive Learning Environment for Process Engineering. AaeE 2007: Eighteenth Annual Conference of the Australasian Association for Engineering Education, Melbourne Australia: Department of Computer Science and Software Engineering, University of Melbourne.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Universal dopant delivery method for polymer optical fiber. POF 2007 16th International Conference on Plastic Optical Fibers. International Cooperative of Plastic Optical Fibers (ICPOF).
  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Gan, J., Lwin, R. (2006). Cleaving microstructured polymer optical fibre : Effect of fibre draw conditions. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Law, S., Barton, G., Van Eijkelenborg, M., Lwin, R. (2006). End-face quality of a cleaved microstructured polymer optical fibre. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Tang, F., McNamara, P., Barton, G. (2006). Enhanced Al Incorporation in Solution-Doped Optical Fibre Fabrication. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Gomes, V., Papworth, P., Barton, G. (2006). Facilitating problem based learning using information and communications technology. 7th International Conference on Information Technology Based Higher Education and Training, 2006. ITHET'06, Piscataway, NJ USA: (IEEE) Institute of Electrical and Electronics Engineers. [More Information]
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Gan, J. (2006). Fibre Draw Conditions and the Cleaving of Microstructured Polymer Optical Fibre. Australian Conference on Optical Fibre Technology and Australian Optical Society (ACOFT/AOS 2006), Melbourne, Vic.: ACOFT/AOS.
  • Barton, G., Gomes, V. (2006). Graduating 'Competent' Chemical Engineers In The 21st Century - From Vision To Reality. 11th Asia Pacific Confederation of Chemical Engineering Congress APCChE 2006, Australia: The Asian Pacific Confederation of Chemical Engineers.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Xue, S. (2006). Heat Transfer in preforms for microstructured polymer optical fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Xue, S., Van Eijkelenborg, M., Argyros, A., Cox, F. (2006). Microstructured polymer optical fibre : The road to commercialization. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Xue, S., Van Eijkelenborg, M., Barton, G. (2006). Role of material properties and pulling conditions in tapering micro-capillary fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Cheung, C., McNamara, P., Barton, G., Liu, Z., Ringer, S. (2006). Si0² and Ge0² Soot Generation in Optical Fibre Preform Fabrication using Modified Chemical Vapour Deposition. 16th International Microscopy Congress IMC16 2006, Japan: Japanese Society of Microscopy.
  • Hambley, P., Van Eijkelenborg, M., Xue, S., Henry, G., Barton, G. (2006). Tapering of microstructured polymer optical fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Lwin, R., Gan, J. (2006). The effect of fabrication parameters on the cleaving of microstructured polymer optical fibers. Optical Fibers and Sensors for Medical Applications IV, San Diego, California, USA: SPIE - International Society for Optical Engineering.
  • Large, M., Xue, S., Poladian, L., Barton, G. (2006). The Significance of Radiative Heating in the Preforms for Silica Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Van Eijkelenborg, M., Barbé, C., Barton, G., Finnie, K., Hambley, P., Hiscocks, M., Issa, N., Ladouceur, F., Lwin, R., Ng, D., Von Korff Schmising, C., Yu, H. (2006). Update on experimental results using microstructured polymer optical fibres. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Tang, F., McNamara, P., Barton, G., Ringer, S., Fleming, S., Liu, Z. (2005). Aluminium Loss in Solution-Doped Silica Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Harvey, J., Krukhlak, R., Song, M., Wu, E., Law, S., Barton, G., Van Eijkelenborg, M., Large, M. (2005). Cleaving Microstructured Polymer Optical Fibre. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Cheung, C., Barton, G., McNamara, P., Fletcher, D. (2005). Computational Fluid Dynamics and the MCVD Process. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Large, M., Cox, F., Argyros, A., Lwin, R., Barton, G., Van Eijkelenborg, M., Manos, S., Poladian, L., Bachmann, A., Poisel, H. (2005). Microstructured POF and Applications. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Large, M., Ponrathnam, S., Argyros, A., Bassett, I., Pujari, N., Cox, F., Lwin, R., Barton, G., Van Eijkelenborg, M. (2005). Microstructured Polymer Optical Fibres: New Opportunities and Challenges. 8th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM) 2005.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Van Eijkelenborg, M. (2005). Progress on Low Loss of Microstructured Polymer Optical Fibres. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Hambley, P., Van Eijkelenborg, M., Barton, G., Henry, G. (2005). Progress Towards Fabricating Microstructured Polymer Optical Fibre Tapers. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Hambley, P., Van Eijkelenborg, M., Barton, G., Henry, G. (2005). Strategies and initial results for microstructured polymer optical fibre tapers. 14th International Conference on Polymer Optical Fiber 2005, Hong Kong: Optoelectronis Research Centre.
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Law, S., Barton, G., Phan, T. (2005). The Causes and Nature of Diameter Variations Along Optical Fiber. Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II (2004), Australia: SPIE - International Society for Optical Engineering.
  • Gomes, V., Barton, G. (2005). The integration of problem based learning in a chemical engineering curriculum. Higher Education Research and Development Society of Australasia, C, Sydney: Higher Education Research and Development Society of Australasia.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Zhao, Y., et al (2004). An overview of microstructured polymer optical fibres and applications. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Zhao, Y., et al (2004). Applications of Microstructured Polymer Optical Fibres. Conference on Lasers & Electro-Optics International Quantum Electronics Conference (CLEO/IQEC 2004), CD-ROM: Conference on Lasers and Electro-Optics (CLEO).
  • Large, M., Argyros, A., Barton, G., Cox, F., Henry, G., Issa, N., Manos, S., Padden, W., Poladian, L., Van Eijkelenborg, M., et al (2004). Future directions for microstructured polymer optical fibres. Photonic crystal materials and devices II, Bellingham, Washington: SPIE - International Society for Optical Engineering.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Large, M., Henry, G., Issa, N., Klein, K., Poisel, H., Pok, W., Poladian, L., Manos, S., Zagari, J. (2004). Graded-index microstructured polymer optical fibre - transmission bandwidth and loss characteristics. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Barton, G., Law, S., McNamara, P., Phan, T. (2004). Measurement and Control Challenges for the Specialty Optical Fibre Industry in the 21st Century. 5th Asian Control Conference ASCC 2004, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Cheung, C., Tang, F., McNamara, P., Barton, G., Ringer, S. (2004). Micro and Nanostructure in MCVD Deposits (POSTER). 2nd Australia-Japan Workshop on Advanced Materials.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Von Korff Schmising, C., Keawfanapadol, T., Lwin, R., et al (2004). Microstructured Polymer Optical Fibres for Applications in Imaging, Interconnects and Supercontinuum Generation. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L. (2003). Applications of microstructured polymer optical fibres. ACOLS: 16th Australian Optical Society Conference, : Academic Press Elsevier.
  • Barton, G., Van Eijkelenborg, M., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Pok, W., Poladian, L. (2003). Characteristics of Multimode Microstructured POF Performance. POF 2003 - 12th International Conference on Polymer Optical Fiber, USA: International Cooperative Plastic Optical Fibre group.
  • Large, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Henry, G., Issa, N., Manos, S., Padden, W., Poladian, L., Van Eijkelenborg, M., Zagari, J. (2003). Microstructured optical fibres: why use polymers? 29th European Conference on Optical Communication - 14th International Conference on Integrated Optics and Optical Fibre Communication, Italy: Ecoc.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N. (2003). Microstructured polymer optical fibres - the exploration of a new class of fibres. 2nd Asia-pacific Polymer Fibre Optics Workshop, : National University of Singapore.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L., Zagari, J. (2003). Microstructured polymer optical fibres -the exploration of a new class of fibres. Second Asia-Pacific Polymer Fibre Optics Workshop.
  • Klein, K., Bunge, C., Bachmann, A., Feistner, S., Barton, G., Van Eijkelenborg, M., Large, M., Poladian, L. (2003). Mikrostrukturierte Multimode-Polymerfasern. 10th ITG Symposium. VDE.
  • Law, S., Phan, T., Barton, G., Barton, M., Elsey, J. (2002). Anomalies in online fibre measurements and their implications for fibre array manufacture. Symposium on Optical Fibre Measurements, Boulder: National Institute of Standards and Technology.
  • Lyytikainen, K., Zagari, J., Barton, G., Canning, J. (2002). Heat transfer in a microstructured polymer optical fibre preform. POF 2002, Keio University, Faculty of Science & Technology, 3-14-1, Hiyoshi, Kohoku-ku Yokohama 223-8522, Japa: International Cooperative of POF.
  • Large, M., Van Eijkelenborg, M., Zagari, J., Barton, G., Manos, S., Henry, G., Issa, N., Bassett, I., Argyros, A., Poladian, L. (2002). Microstructured Polymer Optical Fibres: An Overview of Progress. Microphotonics III Materials and Applications.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N., Large, M., Manos, S., Poladian, L., Zagari, J. (2002). New possibilities with microstructured polymer optical fibres. POF 2002, Keio University, Faculty of Science & Technology, 3-14-1, Hiyoshi, Kohoku-ku Yokohama 223-8522, Japa: International Cooperative of POF.
  • Large, M., Van Eijkelenborg, M., Argyros, A., Zagari, J., Manos, S., Issa, N., Bassett, I., Fleming, S., Barton, G. (2002). Novel microstructured optical fibres fabricated in polymer. 27th Australian Conference on Optical Fibre Technology (ACOFT 2002), Sydney, N.S.W.: Photonics Institute & The Institution of Engineers Australia.
  • Holt, P., Barton, G., Mitchell, C. (2001). Electrocoagulation:a novel water treatment process for a new century. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Gomes, V., Romagnoli, J., Zeaiter, J., Barton, G., Gilbert, R. (2001). Modelling and Control of Molecular Weight and Particle Size Distributions in Styrene Polymerisation. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Barton, G., Kavanagh, J., Romagnoli, J., Malik, R., Doan, T. (2001). Modelling of a Non-Induced E.coli Fermentation Producing Porcine Growth Hormone. The 8th International Conference on Computer Applications in Biotechnology, United States: Pergamon.
  • Barton, G., Kavanagh, J., Romagnoli, J., Malik, R., Doan, T. (2001). Optimisation of Recombinant E.coli Fermentation. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Gomes, V., Barton, G., Romagnoli, J., Zeaiter, J., Gilbert, R. (2001). Strategies for optimisation and control of molecular weight and particle size distributions in emulsion polymerisation. 11th European Symposium of Computer Aided ProcessEngineering (ESCAPE 11), : Ads & Adea.

2014

  • McClure, D., Deligny, J., Kavanagh, J., Fletcher, D., Barton, G. (2014). Impact of Surfactant Chemistry on Bubble Column Systems. Chemical Engineering and Technology, 37(4), 652-658. [More Information]

2013

  • Xue, S., Barton, G. (2013). A finite volume formulation for transient convection and diffusion equations with unstructured distorted grids and its applications in fluid flow simulations with a collocated variable arrangement. Computer Methods in Applied Mechanics and Engineering, 253, 146-159. [More Information]
  • Handelsman, T., Nguyen, T., Vukas, M., Barton, G., Coster, H., Roddick, F., Kavanagh, J. (2013). Characterisation of foulants in membrane filtration of biorefinery effluents. Desalination and Water Treatment, 51(7-9), 1563-1570. [More Information]
  • McClure, D., Kavanagh, J., Fletcher, D., Barton, G. (2013). Development of a CFD model of bubble column bioreactors: Part one - A detailed experimental study. Chemical Engineering and Technology, 36(12), 2065-2070. [More Information]
  • Cen, J., Kavanagh, J., Coster, H., Barton, G. (2013). Fouling of reverse osmosis membranes by cane molasses fermentation wastewater: detection by electrical impedance spectroscopy techniques. Desalination and Water Treatment, 51(4-6), 969-975. [More Information]
  • Xue, S., Barton, G. (2013). Incompressible flow simulations without explicit boundary conditions at any open boundary. 11th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2013), Rhodes, Greece: American Institute of Physics (AIP). [More Information]

2012

  • Walker, T., Xue, S., Barton, G. (2012). A robust Monte Carlo based ray-tracing approach for the calculation of view factors in arbitrary three-dimensional geometries. Computational Thermal Sciences, 4(5), 425-442. [More Information]
  • Xue, S., Barton, G. (2012). Implementation of boundary conditions and global mass conservation in pressure-based finite volume method on unstructured grids for fluid flow and heat transfer simulations. International Journal of Heat and Mass Transfer, 55(19-20), 5233-5243. [More Information]

2011

  • Xue, S., Barton, G., Fan, X. (2011). A Finite Volume Formulation with Unstructured Distorted Grids for Fluid Flow and Heat Transfer. 2011 World Congress on Engineering and Technology, Beijing: (IEEE) Institute of Electrical and Electronics Engineers.
  • Handelsman, T., Kavanagh, J., Coster, H., Barton, G. (2011). Zero Discharge Fermentation Plant Design. Desalination and Water Treatment, 34(1-3), 389-393. [More Information]

2010

  • Cheung, C., Fletcher, D., Barton, G. (2010). A computational fluid dynamics model for co-deposition of silica and germania in the MCVD process. Journal of Non-Crystalline Solids, 356(1), 24-31. [More Information]
  • Gadd, A., Ryan, D., Kavanagh, J., Barton, G. (2010). Design development of an electrocoagulation reactor for molasses process wastewater treatment. Water Science and Technology, 61(12), 3221-3227. [More Information]
  • Gadd, A., Ryan, D., Kavanagh, J., Beaurain, A., Luxem, S., Barton, G. (2010). Electrocoagulation of fermentation wastewater by low carbon steel (Fe) and 5005 aluminium (Al) electrodes. Journal of Applied Electrochemistry, 40(8), 1511-1517. [More Information]
  • Walker, T., Xue, S., Barton, G. (2010). Numerical Determination of Radiative View Factors. Chemeca 2010, Canberra: RMIT Publishing.
  • Walker, T., Xue, S., Barton, G. (2010). Numerical Determination of Radiative View Factors Using Ray Tracing. Journal of Heat Transfer, 132(7), 072702-1-072702-6. [More Information]
  • Yu, H., Leon-Saval, S., Argyros, A., Barton, G. (2010). Temperature effects on emission of quantum dots embedded in polymethylmethacrylate. Applied Optics, 49(15), 2749-2752.

2009

  • Yu, H., Argyros, A., Leon-Saval, S., Barton, G. (2009). Characterisation of quantum dot photoluminescence in polymer optical fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Yu, H., Argyros, A., Leon-Saval, S., Fuerbach, A., Efimov, A., Barton, G. (2009). Emission properties of quantum dots in polymer optical fibres. Optics Express, 17(24), 21344-21349.
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Cheung, C., Fletcher, D., Barton, G. (2009). Impact of chlorine dissociation for modified chemical vapor deposition. Journal of Non-Crystalline Solids, 355(13), 817-820. [More Information]
  • Haley, D., Petersen, T., Barton, G., Ringer, S. (2009). Influence of Field Evaporation on Radial Distribution Functions in Atom Probe Tomography. Philosophical Magazine (London, 2003), 89(11), 925-943.
  • Ryan, D., Gadd, A., Kavanagh, J., Barton, G. (2009). Integrated biorefinery wastewater design. Chemical Engineering Research and Design, 87(9), 1261-1268. [More Information]
  • Barton, G., Kenny, D. (2009). Religion and spirituality in Adolescents. 3rd Australian Conference on Spirituality and Health 2009, Australia: Spirituality & Health Conference Australia Inc.
  • Cheung, C., Fletcher, D., Barton, G., McNamara, P. (2009). Simulation of particle transport and deposition in the modified chemical vapor deposition process. Journal of Non-Crystalline Solids, 355, 327-334. [More Information]

2008

  • Ryan, D., Gadd, A., Kavanagh, J., Zhou, M., Barton, G. (2008). A comparison of coagulant dosing options for the remediation of molasses process water. Separation and Purification Technology, (58), 347-352.
  • Gadd, A., Ryan, D., Kavanagh, J., Barton, G. (2008). Design development of an electrocoagulation reactor for molasses process wastewater treatment. conference on industrial water treatment systems, Amsterdam: International Water Association Publishing.
  • Norton, C., Cameron, I., Crosthwaite, C., Balliu, N., Tade, M., Shallcross, D., Hoadley, A., Barton, G., Kavanagh, J. (2008). Development and deployment of an immersive learning environment for enhancing process systems engineering concepts. Education for Chemical Engineers, 3, e75-e83.
  • Yu, H., Van Eijkelenborg, M., Leon-Saval, S., Argyros, A., Barton, G. (2008). Enhanced magneto-optical effect in cobalt nanoparticle-doped optical fiber. Applied Optics, 47(35), 6497-6501.
  • Yu, H., Argyros, A., Barton, G., Leon-Saval, S., Van Eijkelenborg, M. (2008). Enhancing the Verdet constant in polymer optical fibre by doping with magnetic nanoparticles. The 17th International Conference on Plastic Optical Fibers (POF2008), Brighton, MA, USA: IGI Publishing.
  • Cheung, C., McNamara, P., Barton, G., Liu, Z. (2008). Germania nanocrystals in Modified Chemical Vapour Deposition. Journal of Non-Crystalline Solids, 354, 3958-3964. [More Information]
  • Yu, H., Argyros, A., Barton, G., Leon-Saval, S., Van Eijkelenborg, M. (2008). Magneto-optical effect in cobalt nanoparticle doped polymer optical material. OECC/ACOFT 2008 Conference, Sydney: (IEEE) Institute of Electrical and Electronics Engineers.
  • Large, M., Poladian, L., Barton, G., Van Eijkelenborg, M. (2008). Microstructured Polymer Optical Fibres. New York, US: Springer.
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2008). Multiple solution-doping in optical fibre fabrication I - Aluminium doping. Journal of Non-Crystalline Solids, 354, 927-937. [More Information]
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2008). Multiple solution-doping in optical fibre fabrication II - Rare-earth and aluminium co-doping. Journal of Non-Crystalline Solids, 354, 1582-1590. [More Information]
  • Cheung, C., Fletcher, D., Barton, G., McNamara, P. (2008). Numerical Simulation of silica deposition in the Modified Chemical Vapour Deposition Process. CHT-08 : Advances in Computation Heat Transfer, 50 Cross Highway; Redding, CT 06896-2404, USA: Begell House Inc.

2007

  • Lwin, R., Barton, G., Harvey, L., Harvey, J., Hirst, D., Manos, S., Large, M., Poladian, L., Bachmann, A., Poisel, H., et al (2007). Beyond the bandwidth-length product: Graded Index Microstructured Polymer Optical Fiber. Applied Physics Letters, 91(19), 191119-1-191119-3.
  • Zhou, M., Yu, Q., Lei, L., Barton, G. (2007). Electro-Fenton method for the removal of methyl red in an efficient electrochemical system. Separation and Purification Technology, 57(2), 380-387.
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2007). Microscale inhomogeneities in aluminum solution-doping of silica-based optical fibers. Journal of the American Ceramic Society, 90(1), 23-28.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Nanoparticle-Doped Microstructured Polymer Optical Fibre. 33rd European Conference and Exhibition on Optical Communication.
  • Norton, C., Cameron, I., Balliu, N., Shallcross, D., Barton, G., Kavanagh, J. (2007). Pedagogic Principles for an Immersive Learning Environment for Process Engineering. AaeE 2007: Eighteenth Annual Conference of the Australasian Association for Engineering Education, Melbourne Australia: Department of Computer Science and Software Engineering, University of Melbourne.
  • Kavanagh, J., Barton, G. (2007). Productivity improvement of recombinant Escherichia coli fermentation via robust optimization. Bioprocess and Biosystems Engineering, 31(2), 137-143.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Quantum dot and silica nanoparticle doped polymer optical fibers. Optics Express, 15(16), 9989-9994.
  • Xue, S., Poladian, L., Barton, G., Large, M. (2007). Radiative Heat Transfer in Preforms for Microstructured Optical Fibres. International Journal of Heat and Mass Transfer, 50(7-8), 1569-1576. [More Information]
  • Cheung, C., Haley, D., Fletcher, D., Barton, G., McNamara, P. (2007). Simulation of particle-vortex interactions in the modified chemical vapor deposition process. Journal of Non-Crystalline Solids, 353(44-46), 4046-4075.
  • Xue, S., Van Eijkelenborg, M., Barton, G., Hambley, P. (2007). Theoretical, numerical, and experimental analysis of optical fiber tapering. Journal of Lightwave Technology, 25(5), 1169-1176.
  • Xue, S., Lwin, R., Barton, G., Poladian, L., Large, M. (2007). Transient Heating of PMMA Preforms for Microstructured Optical Fibres. Journal of Lightwave Technology, 25(5), 1177-1183.
  • Yu, H., Argyros, A., Barton, G., Van Eijkelenborg, M., Barbe, C., Finnie, K., Kong, L., Ladouceur, F., McNiven, S. (2007). Universal dopant delivery method for polymer optical fiber. POF 2007 16th International Conference on Plastic Optical Fibers. International Cooperative of Plastic Optical Fibers (ICPOF).

2006

  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Gomes, V., Barton, G., Petrie, J., Romagnoli, J., Holt, P., Abbas, A., Cohen, B., Harris, A., Haynes, B., Langrish, T., Orellana, J., See, H., Valix, M., White, D. (2006). Chemical Engineering Curriculum renewal. Education for Chemical Engineers, 1(1), 116-125.
  • Law, S., Van Eijkelenborg, M., Barton, G., Yan, C., Lwin, R., Gan, J. (2006). Cleaved end-face quality of microstructured polymer optical fibres. Optics Communications, 265(2), 513-520.
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Gan, J., Lwin, R. (2006). Cleaving microstructured polymer optical fibre : Effect of fibre draw conditions. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Law, S., Harvey, J., Krukhlak, R., Song, M., Wu, E., Barton, G., Van Eijkelenborg, M., Large, M. (2006). Cleaving microstructured polymer optical fibres. Optics Communications, 258(2), 193-202.
  • Law, S., Barton, G., Van Eijkelenborg, M., Lwin, R. (2006). End-face quality of a cleaved microstructured polymer optical fibre. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Tang, F., McNamara, P., Barton, G. (2006). Enhanced Al Incorporation in Solution-Doped Optical Fibre Fabrication. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Gomes, V., Papworth, P., Barton, G. (2006). Facilitating problem based learning using information and communications technology. 7th International Conference on Information Technology Based Higher Education and Training, 2006. ITHET'06, Piscataway, NJ USA: (IEEE) Institute of Electrical and Electronics Engineers. [More Information]
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Gan, J. (2006). Fibre Draw Conditions and the Cleaving of Microstructured Polymer Optical Fibre. Australian Conference on Optical Fibre Technology and Australian Optical Society (ACOFT/AOS 2006), Melbourne, Vic.: ACOFT/AOS.
  • Barton, G., Gomes, V. (2006). Graduating 'Competent' Chemical Engineers In The 21st Century - From Vision To Reality. 11th Asia Pacific Confederation of Chemical Engineering Congress APCChE 2006, Australia: The Asian Pacific Confederation of Chemical Engineers.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Xue, S. (2006). Heat Transfer in preforms for microstructured polymer optical fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Xue, S., Van Eijkelenborg, M., Argyros, A., Cox, F. (2006). Microstructured polymer optical fibre : The road to commercialization. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Large, M., Argyros, A., Cox, F., Van Eijkelenborg, M., Ponrathnam, S., Pujari, N., Bassett, I., Lwin, R., Barton, G. (2006). Microstructured Polymer Optical Fibres: New Opportunities and Challenges. Molecular Crystals and Liquid Crystals, 446, 219-231.
  • Tang, F., McNamara, P., Barton, G., Ringer, S. (2006). Nanoscale characterization of silica soots and aluminium solution doping in optical fibre fabrication. Journal of Non-Crystalline Solids, 352(36-37), 3799-3807. [More Information]
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860.
  • Xue, S., Van Eijkelenborg, M., Barton, G. (2006). Role of material properties and pulling conditions in tapering micro-capillary fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Cheung, C., McNamara, P., Barton, G., Liu, Z., Ringer, S. (2006). Si0² and Ge0² Soot Generation in Optical Fibre Preform Fabrication using Modified Chemical Vapour Deposition. 16th International Microscopy Congress IMC16 2006, Japan: Japanese Society of Microscopy.
  • Hambley, P., Van Eijkelenborg, M., Xue, S., Henry, G., Barton, G. (2006). Tapering of microstructured polymer optical fibres. 15th International Conference on Plastic Optical Fiber 2006, Seoul, Korea: People-X, Inc.
  • Law, S., Barton, G., Van Eijkelenborg, M., Yan, C., Lwin, R., Gan, J. (2006). The effect of fabrication parameters on the cleaving of microstructured polymer optical fibers. Optical Fibers and Sensors for Medical Applications IV, San Diego, California, USA: SPIE - International Society for Optical Engineering.
  • Large, M., Xue, S., Poladian, L., Barton, G. (2006). The Significance of Radiative Heating in the Preforms for Silica Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Van Eijkelenborg, M., Barbé, C., Barton, G., Finnie, K., Hambley, P., Hiscocks, M., Issa, N., Ladouceur, F., Lwin, R., Ng, D., Von Korff Schmising, C., Yu, H. (2006). Update on experimental results using microstructured polymer optical fibres. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.

2005

  • Tang, F., McNamara, P., Barton, G., Ringer, S., Fleming, S., Liu, Z. (2005). Aluminium Loss in Solution-Doped Silica Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Harvey, J., Krukhlak, R., Song, M., Wu, E., Law, S., Barton, G., Van Eijkelenborg, M., Large, M. (2005). Cleaving Microstructured Polymer Optical Fibre. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Cheung, C., Barton, G., McNamara, P., Fletcher, D. (2005). Computational Fluid Dynamics and the MCVD Process. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266.
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Barton, G., Law, S., Phan, T. (2005). Limitations to the Manufacture of Specialty Optical Fiber. Journal of Manufacturing Science and Engineering, 127(3), 663-669.
  • Large, M., Cox, F., Argyros, A., Lwin, R., Barton, G., Van Eijkelenborg, M., Manos, S., Poladian, L., Bachmann, A., Poisel, H. (2005). Microstructured POF and Applications. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Large, M., Ponrathnam, S., Argyros, A., Bassett, I., Pujari, N., Cox, F., Lwin, R., Barton, G., Van Eijkelenborg, M. (2005). Microstructured Polymer Optical Fibres: New Opportunities and Challenges. 8th International Conference on Frontiers of Polymers and Advanced Materials (ICFPAM) 2005.
  • Barton, G., Forrester, K., Bradstock, K., Gottlieb, D., Foster, A. (2005). Optimizing bioreactor productivity for therapeutic immune cells. Food and Bioproducts Processing, 83(C2), 158-163.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Van Eijkelenborg, M. (2005). Progress on Low Loss of Microstructured Polymer Optical Fibres. The 14th International Conference on Polymer Optical Fiber, Hong Kong: Optoelectronis Research Centre.
  • Hambley, P., Van Eijkelenborg, M., Barton, G., Henry, G. (2005). Progress Towards Fabricating Microstructured Polymer Optical Fibre Tapers. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Hambley, P., Van Eijkelenborg, M., Barton, G., Henry, G. (2005). Strategies and initial results for microstructured polymer optical fibre tapers. 14th International Conference on Polymer Optical Fiber 2005, Hong Kong: Optoelectronis Research Centre.
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Law, S., Barton, G., Phan, T. (2005). The Causes and Nature of Diameter Variations Along Optical Fiber. Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems II (2004), Australia: SPIE - International Society for Optical Engineering.
  • Holt, P., Barton, G., Mitchell, C. (2005). The future for electrocoagulation as a localised water treatment technology. Chemosphere, 59(3), 355-367. [More Information]
  • Gomes, V., Barton, G. (2005). The integration of problem based learning in a chemical engineering curriculum. Higher Education Research and Development Society of Australasia, C, Sydney: Higher Education Research and Development Society of Australasia.
  • Law, S., Barton, G., Phan, T., Barton, M. (2005). The interpretation of online measurements of optical fibre diameter. Transactions of the Institute of Measurement and Control, 27(3), 215-229.

2004

  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Zhao, Y., et al (2004). An overview of microstructured polymer optical fibres and applications. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Zhao, Y., et al (2004). Applications of Microstructured Polymer Optical Fibres. Conference on Lasers & Electro-Optics International Quantum Electronics Conference (CLEO/IQEC 2004), CD-ROM: Conference on Lasers and Electro-Optics (CLEO).
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Large, M., Henry, G., Issa, N., Klein, K., Poisel, H., Pok, W., Poladian, L., Manos, S., Zagari, J. (2004). Bandwidth and loss measurements of graded-index microstructured polymer optical fibre. Electronics Letters, 40(10), 592-593.
  • Barton, G., Van Eijkelenborg, M., Henry, G., Large, M., Zagari, J. (2004). Fabrication of microstructured polymer optical fibres. Optical Fiber Technology, 10(4), 325-335.
  • Large, M., Argyros, A., Barton, G., Cox, F., Henry, G., Issa, N., Manos, S., Padden, W., Poladian, L., Van Eijkelenborg, M., et al (2004). Future directions for microstructured polymer optical fibres. Photonic crystal materials and devices II, Bellingham, Washington: SPIE - International Society for Optical Engineering.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Large, M., Henry, G., Issa, N., Klein, K., Poisel, H., Pok, W., Poladian, L., Manos, S., Zagari, J. (2004). Graded-index microstructured polymer optical fibre - transmission bandwidth and loss characteristics. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Lyytikainen, K., Zagari, J., Barton, G., Canning, J. (2004). Heat transfer within a microstructured polymer optical fibre preform. Modelling and Simulation in Materials Science and Engineering, 12(3), S255-S265.
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Foster, A., Forrester, K., Gottlieb, D., Barton, G., Romagnoli, J., Bradstock, K. (2004). Large-Scale Expansion Of Cytomegalovirus-Specific Cytotoxic T Cells In Suspension Culture. Biotechnology and Bioengineering, 85(2), 138-146. [More Information]
  • Barton, G., Law, S., McNamara, P., Phan, T. (2004). Measurement and Control Challenges for the Specialty Optical Fibre Industry in the 21st Century. 5th Asian Control Conference ASCC 2004, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Cheung, C., Tang, F., McNamara, P., Barton, G., Ringer, S. (2004). Micro and Nanostructure in MCVD Deposits (POSTER). 2nd Australia-Japan Workshop on Advanced Materials.
  • Van Eijkelenborg, M., Argyros, A., Bachmann, A., Barton, G., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Poladian, L., Von Korff Schmising, C., Keawfanapadol, T., Lwin, R., et al (2004). Microstructured Polymer Optical Fibres for Applications in Imaging, Interconnects and Supercontinuum Generation. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Zagari, J., Argyros, A., Issa, N., Barton, G., Henry, G., Large, M., Poladian, L., Van Eijkelenborg, M. (2004). Small-Core Single-Mode Microstructured Polymer Optical Fiber with Large External Diameter. Optics Letters, 29(8), 818-820.

2003

  • Van Eijkelenborg, M., Argyros, A., Barton, G., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L. (2003). Applications of microstructured polymer optical fibres. ACOLS: 16th Australian Optical Society Conference, : Academic Press Elsevier.
  • Barton, G., Van Eijkelenborg, M., Henry, G., Issa, N., Klein, K., Large, M., Manos, S., Padden, W., Pok, W., Poladian, L. (2003). Characteristics of Multimode Microstructured POF Performance. POF 2003 - 12th International Conference on Polymer Optical Fiber, USA: International Cooperative Plastic Optical Fibre group.
  • Large, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Henry, G., Issa, N., Manos, S., Padden, W., Poladian, L., Van Eijkelenborg, M., Zagari, J. (2003). Microstructured optical fibres: why use polymers? 29th European Conference on Optical Communication - 14th International Conference on Integrated Optics and Optical Fibre Communication, Italy: Ecoc.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N. (2003). Microstructured polymer optical fibres - the exploration of a new class of fibres. 2nd Asia-pacific Polymer Fibre Optics Workshop, : National University of Singapore.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L., Zagari, J. (2003). Microstructured polymer optical fibres -the exploration of a new class of fibres. Second Asia-Pacific Polymer Fibre Optics Workshop.
  • Klein, K., Bunge, C., Bachmann, A., Feistner, S., Barton, G., Van Eijkelenborg, M., Large, M., Poladian, L. (2003). Mikrostrukturierte Multimode-Polymerfasern. 10th ITG Symposium. VDE.
  • Foster, A., Gottlieb, D., Marangolo, M., Bartlett, A., Li, Y., Barton, G., Romagnoli, J., Bradstock, K. (2003). Rapid, Large-Scale Generation of Highly Pure Cytomegalovirus-Specific Cytotoxic T Cells for Adoptive Immunotherapy. Stem Cells and Development, 12(1), 93-105.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Fellew, M., Henry, G., Issa, N., Large, M., Manos, S., Padden, W., Poladian, L., Zagari, J. (2003). Recent progress in microstructured polymer optical fibre fabrication and characterisation. Optical Fiber Technology, 9(4), 199-209.
  • Wong, C., Barton, G., Barford, J. (2003). The Nitrogen Cycle and its Application in Wastewater Treatment. In Duncan Mara, Nigel J. Horan (Eds.), The Handbook of Water and Wastewater Microbiology, (pp. 427-439). The Netherlands: Academic Press Elsevier.

2002

  • Holt, P., Barton, G., Wark, M., Mitchell, C. (2002). A quantitative comparison between chemical dosing and electrocoagulation. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 211(2-3), 233-248.
  • Law, S., Phan, T., Barton, G., Barton, M., Elsey, J. (2002). Anomalies in online fibre measurements and their implications for fibre array manufacture. Symposium on Optical Fibre Measurements, Boulder: National Institute of Standards and Technology.
  • Lyytikainen, K., Zagari, J., Barton, G., Canning, J. (2002). Heat transfer in a microstructured polymer optical fibre preform. POF 2002, Keio University, Faculty of Science & Technology, 3-14-1, Hiyoshi, Kohoku-ku Yokohama 223-8522, Japa: International Cooperative of POF.
  • Zeaiter, J., Gomes, V., Romagnoli, J., Barton, G. (2002). Inferential conversion monitoring and control in emulsion polymerisation through calorimetric measurements. Chemical Engineering Journal, 89(1-3), 37-45.
  • Holt, P., Barton, G., Mitchell,, C. (2002). Mathematical analysis of a batch electrocoagulation. Water Science and Technology: Water Supply, 2(5-6), 65-71.
  • Large, M., Van Eijkelenborg, M., Zagari, J., Barton, G., Manos, S., Henry, G., Issa, N., Bassett, I., Argyros, A., Poladian, L. (2002). Microstructured Polymer Optical Fibres: An Overview of Progress. Microphotonics III Materials and Applications.
  • Van Eijkelenborg, M., Argyros, A., Barton, G., Bassett, I., Cox, F., Fellew, M., Fleming, S., Henry, G., Issa, N., Large, M., Manos, S., Poladian, L., Zagari, J. (2002). New possibilities with microstructured polymer optical fibres. POF 2002, Keio University, Faculty of Science & Technology, 3-14-1, Hiyoshi, Kohoku-ku Yokohama 223-8522, Japa: International Cooperative of POF.
  • Large, M., Van Eijkelenborg, M., Argyros, A., Zagari, J., Manos, S., Issa, N., Bassett, I., Fleming, S., Barton, G. (2002). Novel microstructured optical fibres fabricated in polymer. 27th Australian Conference on Optical Fibre Technology (ACOFT 2002), Sydney, N.S.W.: Photonics Institute & The Institution of Engineers Australia.
  • Zeaiter, J., Romagnoli, J., Barton, G., Gomes, V., Hawkett, B., Gilbert, R. (2002). Operation of semi-batch emulsion polymerisation reactors: Modelling, validation and effect of operating conditions. Chemical Engineering Journal, , 2955-2969.
  • Galan Domingo, O., Barton, G., Romagnoli, J. (2002). Robust control of a SAG mill. Powder Technology, 124(3), 264-271.
  • Zeaiter, J., Bakhtazad, A., Romagnoli, J., Barton, G., Gomes, V. (2002). The role of wave-net models in emulsion polymerisation. Powder Technology, 124(3), 212-218.

2001

  • Holt, P., Barton, G., Mitchell, C. (2001). Electrocoagulation:a novel water treatment process for a new century. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Barton, G., Marlin, T., Brisk, M., Perkins, J. (2001). Experiences from an industry-university study on control benefits. Pulp and Paper-Canada, 4.2527777778, 34-37.
  • Gomes, V., Romagnoli, J., Zeaiter, J., Barton, G., Gilbert, R. (2001). Modelling and Control of Molecular Weight and Particle Size Distributions in Styrene Polymerisation. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Barton, G., Kavanagh, J., Romagnoli, J., Malik, R., Doan, T. (2001). Modelling of a Non-Induced E.coli Fermentation Producing Porcine Growth Hormone. The 8th International Conference on Computer Applications in Biotechnology, United States: Pergamon.
  • Barton, G., Kavanagh, J., Romagnoli, J., Malik, R., Doan, T. (2001). Optimisation of Recombinant E.coli Fermentation. 6th World Congress of Chemical Engineering. UNSW Australian Defence Force Academy.
  • Barton, G., Dun, T., Schlogl,, E. (2001). Simulated Swaption Delta-Hedging in the lognormal forward libor model. International Journal of Theoretical and Applied Finance, 4 No 4, 677-709.
  • Gomes, V., Barton, G., Romagnoli, J., Zeaiter, J., Gilbert, R. (2001). Strategies for optimisation and control of molecular weight and particle size distributions in emulsion polymerisation. 11th European Symposium of Computer Aided ProcessEngineering (ESCAPE 11), : Ads & Adea.
  • Barton, G., Di, M. (2001). The economic assessment of process control quality using a Taguchi-based method. Journal of Process Control, 11, 81-88.
  • Dun, T., Barton, G., Brace, A. (2001). Towards a Central Interest Rate Model. In E Jouini, J Cvitanic & M Musiela (Eds.), Option Pricing, Interest Rates and Risk Management, (pp. 278-313). United Kingdom: Sage Publications.

For support on your academic profile contact .