Professor Lin Ye

BE Harbin, ME PhD BUAA, FTSE

Director, Centre for Advanced Materials Technology
School of Aerospace, Mechanical and Mechatronic Engineering

J07 - Mechanical Engineering Building
The University of Sydney

Telephone +61 2 9351 4798
Fax +61 2 9351 3760

Website Centre for Advanced Materials Technology

APCFS/SIF-2014 International Congress

School of Aerospace, Mechanical and Mechatronic Engineering

Teaching and supervision

MECH1560 - Introduction to Mechanical Engineering

MECH3362 - Materials 2

MECH4310 - Advanced Engineering Materials

MECH5304 - Materials Failure

MECH5305 - Smart Materials

MECH5310 - Advanced Engineering Materials

MECH5362 - Foundations of Materials 2

In the media

  • APCFS/SIF-2014 International Congress [9 - 12 December 2014]

    University of Sydney

    An international forum for academics, research scientists, engineers and other experts, this international congress will cover new research results and trends in fracture, fatigue, creep, co... More...

Selected grants

2015

  • Integrity analysis of advanced composites after lightening strike; Ye L, Chang L, Yang C, Wang D; Australian Research Council (ARC)/Discovery Projects (DP).

2013

  • Australia-China Joint Research Centre for Minerals, Metallurgy and Materials (3-M Centre); Yu A, Ye L; Department of Industry, Innovation, Climate Change, Science, Research and Tertiary Education (Fed)/Australia China Science and Research Fund - Joint Research Centres.
  • An automated 3D electron microscopy imaging system comprising a 3View2 and field-emission scanning electron microscope; Liu Z, Chen M, Copeland L, Crawford J, Langrish T, Li Q, Mai Y, Overall R, Weiss A, Ye L; DVC Research/Equipment Grant.
  • Characterisations of dynamic energy dissipation mechanisms in shear thickening fluids; Ye L; DVC Research/Bridging Support Grant.

2012

  • A complete thermo-electric characterisation facility for exploration of novel materials and devices at high temperatures; Wang X, Ye L, Yeoh W; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).
  • Insights Into Phase Transition Kinetics in Shear Thickening Fluids and their Novel Applications; Chang L, Ye L, Friedrich K; DVC Research/Bridging Support Grant.
  • National in-situ transmission electron microscope facilities; Zou J, Liao X, Ringer S, Ye L, Zheng R, Wang Y; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).

2011

  • Fibrous fabric with directional transplanar transport properties for moisture and water; Ye L, Fan J; Australian Research Council (ARC)/Discovery Projects (DP).
  • Nanomechanical characterization of the ultra-thin transfer film in polymer tribology; Chang L, Ye L, Burkhart T, Friedrich K; Group of Eight/Germany Joint Research Co-operation Scheme.
  • Development of multi scale modelling technology for the advanced composite materials; Ye L; DVC International/IPDF Grant.

2008

  • Memorandum of Cooperation for ACS. See notes tab for details; Connell R, Ye L, Tong L, Deng S; Cooperative Research Centre for Advanced Composite Structures Limited/Project Support.
  • High-Resolution Field Emission Scanning Electron Microscopy (FESEM) Platform for Characterisation at the Nanometre-Level; Cairney J, Ringer S, Braet F, Ferry M, Sorrell C, Ye L, Ruys A, Barton G, Harris A, Ranzi G, Eggleton B, Grillet C, Mckenzie D, Lay P, Masters A, Parker A, Overall R, Weiss A, Murphy C, Ramzan I, Copeland L, Potts D; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).
  • Fundamentals of active sensor network for damage identification in engineering structures; Ye L; Australian Research Council (ARC)/Discovery Projects (DP).
  • Fundamental roles of nano-particles in CF/EP composites; Yu Z, Ye L; Australian Research Council (ARC)/Discovery Projects (DP).
  • High Resolution Field Emission Scanning Electron Microscopy (FESEM) Platform for Characterisation at; Ringer S, Barton G, Ramzan I, Copeland L, Potts D, Braet F, Grillet C, Lay P, Murphy C, Cairney J, Ferry M, Eggleton B, McKenzie D, Masters A, Parker A, Overall R, Weiss A, Ruys A, Sorrell C, Ye L, Harris A, Ranzi G; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).

2005

  • On-line structural integrity assessment of advanced composite airframe with senor network; Ye L, Afaghi-Khatibi A, Wang X; Australian Research Council (ARC)/Discovery Projects (DP).
  • Fabrication and characterization of nanostructured light metal; Ye L, Yan C; University of Sydney/Research & Development.

2004

  • Integrated Precision Machining of Complex Profiles; Mathew P, Zhang L, Mai Y, Ye L, Ruys A, Zarudi I, Tieu K, Zhang N, Arsecularatne J, Jiang Z; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).
  • A unified approach to determine the permeability ofc preforms for advanced composites; Ye L; Australian Research Council (ARC)/Discovery Projects (DP).
  • Digital Damage Fingerprints (DDF)-based structural health monitoring techniques using artificial neural algorithm; Ye L; DVC Research/Research and Development Scheme: Research and Development (R&D).

2003

  • Old record from Blocs # 5054 Title details moved to Notes tab; Wood L, Luo Q, Deng S, Ye L; Cooperative Research Centre for Advanced Composite Structures Limited/Project Support.
  • Development of Mechanically Alloyed Nanocrystaline Magnesium Compounds for Hydrogen Storage; Ye L; DVC Research/Research and Development Scheme: Research and Development (R&D).

2002

  • Linkage 2002 - Thermoforming Mechanisms for Cost-effective Manufacturing of Advanced Composite Struc; Ye L, Kerin F; Pacific Engineering Systems International Pty Ltd/Project Support.
  • Thermoforming Mechanisms for Cost-effective Manufacturing of Advanced Composite Structures; Ye L, Mai Y, Young M; Australian Research Council (ARC)/Linkage Projects (LP).
  • De-consolidation and Re-consolidation of Advanced Thermoplastic Matrix Composites; Ye L, Liu H; Australian Research Council (ARC)/Discovery Projects (DP).
  • A Novel Approach to Determine Permeability for Cost-Effective Manufacturing of Thermoplastic Matrix Composites; Ye L; Australian Research Council (ARC)/Linkage International: ARC International Fellowships (ARCIF).
  • Carbon Nantubes Composites; Ye L; DVC Research/Research and Development Scheme: Research and Development (R&D).

2000

  • Manufacturing of carbon-fibre/glass matrix composites from commingled preform; Ye L; Australian Research Council (ARC)/Large Research Grants (LRG).
  • Joining of dissimilar materials with thermoplastic adhesive using a novel resistance welding process; Ye L; Australian Research Council (ARC)/Large Research Grants (LRG).
  • Forming of thermosetting resin composites at green stages; Ye L; Australian Research Council (ARC)/Small Grants.
  • Development of models to simulate pultrusion process for large scale aerospace sections; Ye L, Mai Y; Australian Research Council (ARC)/Strategic Partnerships with Industry - Research and Training (SPIRT).

1999

  • SPIRT 2000: Development of models to simulate pultrusion process for large scale aerospace sections; Ye L.
  • Old Blocs migration for ACS CRC. See notes tab; Mai Y, Ye L, Barr A, Steven G; Cooperative Research Centre for Advanced Composite Structures Limited/Project Support.

Selected publications

Download citations: PDF RTF Endnote

Books

  • Su, Z., Ye, L. (2009). Identification of Damage Using Lamb Waves: From Fundamentals to Applications. Germany: Springer.
  • Ageorges, C., Ye, L. (2002). Fusion Bonding of Polymer Composites: From Basic Mechanisms to Process Optimisation. United States: Springer.

Edited Books

  • Ye, L., Zhang, L., Bell, J., Yan, C. (2008). Frontiers in Materials Science and Technology. Switzerland: Trans Tech Publications.

Book Chapters

  • Shou, D., Ye, L., Fan, J. (2014). Gas Transport Properties and Transport-Based Applications of Electrospun Nanofibers. Nanotechnology in Australia 2-Showcase of Early Career Research. Singapore: Pan Stanford Publishing.
  • Mustapha, S., Ye, L. (2013). Non-destructive evaluation (NDE) of composites: assessing debonding in sandwich panels using guided waves. In Vistasp M Karbhari (Eds.), Non-destructive evaluation (NDE) of polymer matrix composites: Techniques and applications, (pp. 238-278). Cambridge, United Kingdom: Woodhead Publishing Limited.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2013). Synergistic effects of nanoparticles and traditional tribofillers on sliding wear of polymeric hybrid composites. In Klaus Friedrich, Alois K. Schlarb (Eds.), Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings 2nd Edition, (pp. 49-89). Oxford, UK: Butterworth Heinemann.
  • Su, Z., Wang, X., Ye, L. (2009). Data fusion of multiple signals from the Sensor Network. In Chang, Fu-Kuo; Fujino, Yozo; Boller, Christian (Eds.), Encyclopedia of Structural Health Monitoring: Volume 2, (pp. 697-708). United Kingdon: John Wiley & Sons.
  • Su, Z., Ye, L. (2008). Lamb wave-based quantitative identification of delamination in composite laminates. In Srinivasan Sridharan (Eds.), Delamination behaviour of composites, (pp. 169-216). Cambridge, UK: Woodhead Publishing Ltd.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2008). Synergistic effects of nanoparticles and traditional tribo-fillers on sliding wear of polymeric hybrid composites. In Friedrich K, Schlarb AK (Eds.), Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings, (pp. 35-61). Oxford, United Kingdom: Elsevier.
  • Ye, L., Lu, M., Liu, H. (2005). Deconsolidation and Reconsolidation of Thermoplastic Composites During Processing. In K. Friedrich, S. Fakirov, Z. Zhang (Eds.), Polymer Composites - From Nano- to Macro-Scale, (pp. 233-254). NY, USA: Springer Science + Business Media.
  • Su, Z., Ye, L. (2005). Modelling Structural Damage Using Elastic Wave-Basd Techniques. In C Soutis, Shefield University & P.W.R. Beaumont, Cambridge University, UK (Eds.), Mutli-scale modelling of composite material systems: The art of predictive damage modelling, (pp. 430-468). Cambridge, England: Woodhead Publishing Ltd.
  • Yan, C., Ye, L., Yan, L., Mai, Y., Lu, L., Lai, M. (2005). Synthesis and Mechanical Properties of Nanostructured Mg-Al-Nd Alloys. In Zhang T Y; Kim J K (Eds.), Macro-, Meso-, Micro- and Nano-Mechanics of Materials, (pp. 93-100). Zurich: Trans Tech Publications.

Journals

  • Fu, K., Chang, L., Zheng, B., Yin, Y., Ye, L. (2014). A Method For Defining Initial Stress In Progressively Deposited Film On A Substrate. International Journal of Modern Physics B: condensed matter physics etc, 28(10), Article number 14500568. [More Information]
  • Wang, H., Chang, L., Yang, X., Yuan, L., Ye, L., Zhu, Y., Harris, A., Minett, A., Trimby, P., Friedrich, K. (2014). Anisotropy in tribological performances of long aligned carbon nanotubes/polymer composites. Carbon, 67, 38-47. [More Information]
  • Guo, Q., Ye, L., Wang, Y., Feng, H., Li, Y. (2014). Comparative assessment of surface roughness and microstructure produced in whirlwind milling of bearing steel. Machining Science and Technology, 18(2), 251-276. [More Information]
  • Mustapha, S., Lu, Y., Li, J., Ye, L. (2014). Damage detection in rebar-reinforced concrete beams based on time reversal of guided waves. Structural Health Monitoring: an international journal, 13(4), 347-358. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). Gas transport properties of electrospun polymer nanofibers. Polymer, 55(14), 3149-3155. [More Information]
  • Shou, D., Ye, L., Fan, J., Fu, K., Mei, M., Wang, H., Chen, Q. (2014). Geometry-Induced Asymmetric Capillary Flow. Langmuir, 30(19), 5448-5454. [More Information]
  • Mustapha, S., Ye, L. (2014). Leaky and non-leaky behaviours of guided waves in CF/EP sandwich structures. Wave Motion, 51(6), 905-918. [More Information]
  • Shou, D., Ye, L., Fan, J., Fu, K. (2014). Optimal Design of Porous Structures for the Fastest Liquid Absorption. Langmuir, 30(1), 149-155. [More Information]
  • Chang, L., Friedrich, K., Ye, L. (2014). Study on the Transfer Film Layer in Sliding Contact Between Polymer Composites and Steel Disks Using Nanoindentation. Journal of Tribology, 136(2), 021602-1-021602-12. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). The fastest capillary flow under gravity. Applied Physics Letters, 104(2014), 231602-1-231602-3. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). Treelike networks accelerating capillary flow. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 89(5), 1-7. [More Information]
  • Ye, L., Zhang, D., Wang, D. (2013). Advanced composites with multi-functionality enhanced by nanoparticles. Advanced Materials Research, 747, 19-22. [More Information]
  • Fu, K., Yin, Y., Chang, L., Shou, D., Zheng, B., Ye, L. (2013). Analysis on multiple ring-like cracks in thin amorphous carbon film on soft substrate under nanoindentation. Journal of Physics D: Applied Physics, 46(50), 1-10. [More Information]
  • Mustapha, S., Ye, L. (2013). Damage identification and assessment in tapered sandwich structures using guided waves. Key Engineering Materials, 558, 25-38. [More Information]
  • Zhang, J., Deng, S., Wang, Y., Ye, L., Zhou, L., Zhang, Z. (2013). Effect of nanoparticles on interfacial properties of carbon fibre-epoxy composites. Composites Part A: Applied Science and Manufacturing, 55, 35-44. [More Information]
  • Shou, D., Tang, Y., Ye, L., Fan, J., Ding, F. (2013). Effective permeability of gas diffusion layer in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 38(25), 10519-10526. [More Information]
  • Lu, Y., Li, J., Ye, L., Wang, D. (2013). Guided waves for damage detection in rebar-reinforced concrete beams. Construction and Building Materials, 47, 370-378. [More Information]
  • Shou, D., Ye, L., Fan, J. (2013). Heterogeneous porous structures for the fastest liquid absorption. Proceedings of SPIE - International Society for Optical Engineering, 8793, 1-10. [More Information]
  • Tang, Y., Ye, L., Zhang, Z., Friedrich, K. (2013). Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles - A review. Composites Science and Technology, 86, 26-37. [More Information]
  • Deng, S., Beehag, A., Hillier, W., Zhang, D., Ye, L. (2013). Kenaf–polypropylene composites manufactured from blended fiber mats. Journal of Reinforced Plastics and Composites, 32(16), 1198-1210. [More Information]
  • Lu, Y., Lu, M., Ye, L., Wang, D., Zhou,, L., Su, Z. (2013). Lamb Wave Based Monitoring of Fatigue Crack Growth Using Principal Component Analysis. Key Engineering Materials, 558, 260-267. [More Information]
  • Wei, K., Ye, L., Ning, L., Liu, Y. (2013). Nonlinear dynamic response of a cracked beam under multi-frequency excitation. Advances in Vibration Engineering, 12(5), 431-446.
  • Guo, Q., Chang, L., Ye, L., Wang, Y., Feng, H., Cao, Y., Lian, Q., Li, Y. (2013). Residual Stress, Nanohardness, and Microstructure Changes in Whirlwind Milling of GCr15 Steel. Materials and Manufacturing Processes, 28(10), 1047-1052. [More Information]
  • Witt, N., Tang, Y., Ye, L., Fang, L. (2013). Silicone rubber nanocomposites containing a small amount of hybrid fillers with enhanced electrical sensitivity. Materials and Design, 45, 548-554. [More Information]
  • Zhang, J., Chang, L., Deng, S., Ye, L., Zhang, Z. (2013). Some insights into effects of nanoparticles on sliding wear performance of epoxy nanocomposites. Wear, 304(1-2), 138-143. [More Information]
  • Shou, D., Ye, L., Tang, Y., Fan, J., Ding, F. (2013). Transverse permeability determination of dual-scale fibrous materials. International Journal of Heat and Mass Transfer, 58(1-2), 532-539. [More Information]
  • Wang, M., Ruan, W., Huang, Y., Ye, L., Rong, M., Zhang, M. (2012). A strategy for significant improvement of strength of semi-crystalline polymers with the aid of nanoparticles. Journal of Materials Chemistry, 22(11), 4592-4598. [More Information]
  • Zhang, D., Ye, L., Wang, D., Tang, Y., Mustapha, S., Chen, Y. (2012). Assessment of transverse impact damage in GF/EP laminates of conductive nanoparticles using electrical resistivity tomography. Composites Part A: Applied Science and Manufacturing, 43(9), 1587-1598. [More Information]
  • Zhang, D., Ye, L., Deng, S., Zhang, J., Tang, Y., Chen, Y. (2012). CF/EP composite laminates with carbon black and copper chloride for improved electrical conductivity and interlaminar fracture toughness. Composites Science and Technology, 72(3), 412-420. [More Information]
  • Witt, N., Ye, L., Tang, Y. (2012). Conductive rubber nanocomposites as tensile and pressure sensors. Applied Mechanics and Materials, 217-219(2012), 130-133. [More Information]
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2012). Debonding detection in composite sandwich structures based on guided waves. AIAA Journal, 50(8), 1697-1706. [More Information]
  • Wang, D., Ye, L., Tang, Y., Lu, Y. (2012). Erratum to "Monitoring of delamination onset and growth during Mode I and Mode II interlaminar fracture tests using guided waves" [Compos Sci Technol 2011;72(2):145-51]. Composites Science and Technology, 72(4), 533. [More Information]
  • Lin, X., Shen, X., Zheng, Q., Yousefi, N., Ye, L., Mai, Y., Kim, J. (2012). Fabrication of Highly-Aligned, Conductive, and Strong Graphene Papers Using Ultralarge Graphene Oxide Sheets. ACS Nano, 6(12), 10708-10719. [More Information]
  • Tang, L., Zhang, H., Sprenger, S., Ye, L., Zhang, Z. (2012). Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles. Composites Science and Technology, 72(5), 558-565. [More Information]
  • Tang, Y., Ye, L., Deng, S., Yang, C., Yuan, W. (2012). Influences of processing methods and chemical treatments on fracture toughness of halloysite-epoxy composites. Materials and Design, 42, 471-477. [More Information]
  • Kim, K., Ye, L. (2012). Interlaminar fracture properties of weft-knitted/woven fabric interply hybrid composite materials. Journal of Materials Science, 47(20), 7280-7290. [More Information]
  • Wang, D., Ye, L., Tang, Y., Lu, Y. (2012). Monitoring of delamination onset and growth during Mode I and Mode II interlaminar fracture tests using guided waves. Composites Science and Technology, 72(2), 145-151. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2012). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part I: Effects of concentration on morphology, liquid crystallinity and thermal properties. e-Polymers (online), 22 January 2012(008), 1-12.
  • Zhang, Z., Chen, H., Ye, L. (2011). A Stiffened Plate Element Model for Advanced Grid Stiffened Composite Plates/Shells. Journal of Composite Materials, 45(2), 187-202. [More Information]
  • Wang, Y., Zhou,, L., Wang, Z., Huang, H., Ye, L. (2011). Analysis of internal stresses induced by strain recovery in a single SMA fiber-matrix composite. Composites Part B: Engineering, 42(5), 1135-1143. [More Information]
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2011). Assessment of debonding in sandwich CF/EP composite beams using A0 Lamb wave at low frequency. Composite Structures, 93(2), 483-491. [More Information]
  • Peng, H., Ye, L., Meng, G., Sun, K., Li, F. (2011). Characteristics of elastic wave propagation in thick beams - when guided waves prevail? Journal of Theoretical and Applied Mechanics, 49(3), 807-823.
  • Tang, Y., Ye, L., Zhang, D., Deng, S. (2011). Characterization of transverse tensile, interlaminar shear and interlaminate fracture in CF/EP laminates with 10 wt% and 20 wt% silica nanoparticles in matrix resins. Composites Part A: Applied Science and Manufacturing, 42(12), 1943-1950. [More Information]
  • Sun, K., Meng, G., Ye, L., Li, F. (2011). Damage size identification of thick steel beam based on ultrasonic guided wave. Zhendong yu Chongji/Journal of Vibration and Shock, 30(9), 227-231.
  • Deng, S., Hou, M., Liu, X., Qi, B., Ye, L. (2011). Determination of CTEs of cured epoxy and polyester (PET) stitching threads. Journal of Composite Materials, 45(20), 2071-2081. [More Information]
  • Bal, K., Fan, J., Sarkar, M., Ye, L. (2011). Differential spontaneous capillary flow through heterogeneous porous media. International Journal of Heat and Mass Transfer, 54(13-14), 3096-3099. [More Information]
  • Tang, Y., Deng, S., Ye, L., Yang, C., Yuan, Q., Zhang, J., Zhao, C. (2011). Effects of unfolded and intercalated halloysites on mechanical properties of halloysite-epoxy nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(4), 345-354. [More Information]
  • Zhang, G., Huang, C., Zhou,, L., Ye, L., Li, W., Huang, H. (2011). Enhanced charge storage by the electrocatalytic effect of anodic TiO2 nanotubes. Nanoscale, 3(10), 4174-4181. [More Information]
  • Lu, X., Lu, M., Zhou, L., Su, Z., Cheng, L., Ye, L., Meng, G. (2011). Evaluation of welding damage in welded tubular steel structures using guided waves and a probability-based imaging approach. Smart Materials and Structures, 20(1), 015018-1-015018-15. [More Information]
  • Miao, X., Wang, D., Ye, L., Lu, Y., Li, F., Meng, G. (2011). Identification of Dual Notches Based on Time-Reversal Lamb Waves and a Damage Diagnostic Imaging Algorithm. Journal of Intelligent Material Systems and Structures, 22(17), 1983-1992. [More Information]
  • Wang, D., Ye, L., Su, Z., Lu, Y. (2011). Quantitative identification of multiple damage in laminated composite beams using A0 Lamb mode. Journal of Composite Materials, 45(20), 2061-2069. [More Information]
  • Tang, Y., Yang, C., Gao, P., Ye, L., Zhao, C., Lin, W. (2011). Rheological Study on High-Density Polyethylene/Organoclay Composites. Polymer Engineering and Science, 51(1), 133-142. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Wang, Y., Zhou,, L., Wang, Z., Huang, H., Ye, L. (2011). Stress distributions in single shape memory alloy fiber composites. Materials and Design, 32(7), 3783-3789. [More Information]
  • Wei, K., Bai, Q., Meng, G., Ye, L. (2011). Vibration characteristics of electrorheological elastomer sandwich beams. Smart Materials and Structures, 20(5), 1-8. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). A Comparative Study of Thermotropic LCP and Organoclay as Fillers in High Molecular Mass Polyethylene with Different Blending Sequences. Polymer Engineering and Science, 50(8), 1679-1688. [More Information]
  • Wang, D., Ye, L., Lu, Y., Li, F. (2010). A damage diagnostic imaging algorithm based on the quantitative comparison of Lamb wave signals. Smart Materials and Structures, 19(6), 065008-1-065008-12.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2010). Assessment of debonding in sandwich CF/EP composite beams using A0 Lamb wave at low frequency. Composite Structures, 93(2), 483-491.
  • Peng, H., Ye, L., Meng, G., Mustapha, S., Li, F. (2010). Concise analysis of wave propagation using the spectral element method and identification of delamination in CF/EP composite beams. Smart Materials and Structures, 19(8), 1-11. [More Information]
  • Lu, Y., Ye, L., Wang, D., Wang, X., Su, Z. (2010). Conjunctive and compromised data fusion schemes for identification of multiple notches in an aluminium plate using lamb wave signals. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 57(9), 2005-2016.
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2010). Damage identification in thick steel beam based on guided ultrasonic waves. Journal of Intelligent Material Systems and Structures, 21(3), 225-232.
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Experimental measurement and numerical simulation of viscosity reduction effects in HMMPE containing a small amount of exfoliated organoclay-modified TLCP composite. Polymer, 51(2), 514-521. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Organoclay-modified thermotropic liquid crystalline polymers as viscosity reduction agents for high molecular mass polyethylene. Journal of Materials Science, 45(19), 5353-5363. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Organoclay/Thermotropic Liquid Crystalline Polymer Nanocomposites. III. Effects of Fully Exfoliated Organoclay on Morphology, Thermal, and Rheological Properties. Journal of Polymer Science Part B-Polymer Physics, 48(6), 712-720. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part II: shear-induced phase separation. Journal of Materials Science, 45(16), 4422-4430. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part IV: organoclay of comparable size to fully extended TLCP molecules. Journal of Materials Science, 45(12), 3336-3343. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part V: morphological and rheological studies. Journal of Materials Science, 45(11), 2874-2883. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/Thermotropic Liquid Crystalline Polymer Nanocomposites. Part VI: Effects of Intercalated Organoclay on Nanocomposite Morphology, Thermal and Rheological Properties. International Journal of Smart and Nano Materials, 1(3), 173-186. [More Information]
  • Chen, Z., Ye, L., Lu, M. (2010). Permeability Predictions for Woven Fabric Preforms. Journal of Composite Materials, 44(13), 1569-1586.
  • Lu, Y., Ye, L., Wang, D., Zhou,, L., Cheng, L. (2010). Piezo-activated guided wave propagation and interaction with damage in tubular structures. Smart Structures and Systems, 6(7), 835-849.
  • Wang, D., Ye, L., Su, Z., Lu, Y., Li, F., Meng, G. (2010). Probabilistic damage identification based on correlation analysis using guided wave signals in aluminum plates. Structural Health Monitoring: an international journal, 9(2), 133-144.
  • Cao, M., Ye, L., Zhou,, L., Su, Z., Bai, R. (2010). Sensitivity of fundamental mode shape and static deflection for damage identification in cantilever beams. Mechanical Systems and Signal Processing, 25(2), 630-643. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Tang, Y., Jim, C., Liu, Y., Ye, L., Qin, A., Lam, J., Zhao, C., Tang, B. (2010). Synthesis and Curing of Hyperbranched Poly(triazole)s with Click Polymerization for Improved Adhesion Strength. ACS Applied Materials and Interfaces, 2(2), 566-574. [More Information]
  • Wang, D., Ye, L., Lu, Y. (2009). A Probabilistic Diagnostic Algorithm for Identification of Multiple Notches Using Digital Damage Fingerprints (DDFs). Journal of Intelligent Material Systems and Structures, 20, 1439-1450.
  • Lu, Y., Ye, L., Su, Z., Zhou, L., Cheng, L. (2009). Artificial Neural Network (ANN)-based Crack Identification in Aluminium Plates with Lamb Wave Signals. Journal of Intelligent Material Systems and Structures, 20, 39-49.
  • Deng, S., Qi, B., Hou,, M., Ye, L., Magniez, K. (2009). Assessment of interfacial bonding between polymer threads and epoxy resin by transverse fibre bundle (TFB) tests. Composites Part A: Applied Science and Manufacturing, 40(11), 1698-1707. [More Information]
  • Lu, Y., Ye, L., Wang, D., Zhong, Z., Herszberg, I. (2009). Damage Detection in a Large Composite Panel of Five Stiffeners Using Lamb Wave Signals. Materials Forum, 33, 136-142.
  • Li, F., Meng, G., Ye, L., Lu, Y., Kageyama, K. (2009). Dispersion analysis of Lamb waves and damage detection for aluminum structures using ridge in the time-scale domain. Measurement Science and Technology, 20(9), 095704-1-095704-10.
  • Chang, L., Friedrich, K., Ye, L., Toro, P. (2009). Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites. Journal of Materials Science, 44, 4003-4012. [More Information]
  • Deng, S., Zhang, J., Ye, L. (2009). Halloysite-epoxy nanocomposites with improved particle dispersion through ball mill homogenisation and chemical treatments. Composites Science and Technology, 69(14), 2497-2505. [More Information]
  • Wang, D., Ye, L., Lu, Y., Su, Z. (2009). Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffeners. Composites Science and Technology, 69(13), 2054-2063. [More Information]
  • Heng, D., Ogawa, K., Cutler, D., Chan, H., Raper, J., Ye, L., Yun, J. (2009). Pure drug nanoparticles in tablets: what are the dissolution limitations? Journal of Nanoparticle Research, , 1-12.
  • Lu, Y., Ye, L., Wang, D., Zhong, Z. (2009). Time-domain Analyses and Correlations of Lamb Wave Signals for Damage Detection in a Composite Panel of Multiple Stiffeners. Journal of Composite Materials, 43(26), 3211-3230.
  • Yang, C., Hodgson, P., Liu, Q., Ye, L. (2008). Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening. Journal of Materials Processing Technology, 201, 303-309. [More Information]
  • Lu, Y., Ye, L., Wang, D., Meng, G. (2008). Guided wave propagation and interaction with damage in tubular structures. Advanced Materials Research, 32, 289-292.
  • Zhang, Z., Chen, H., Ye, L. (2008). Progressive failure analysis for advanced grid stiffened composite plates/shells. Composite Structures, 86, 45-54. [More Information]
  • Lu, Y., Ye, L., Su, Z., Yang, C. (2008). Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminium plates. NDT and E International, 41(1), 59-68.
  • Yang, J., Chen, Z., Yang, G., Fu, S., Ye, L. (2008). Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer. Polymer, 49, 3168-3175.
  • Kruckenberg, T., Ye, L., Paton, R. (2008). Static and vibration compaction and microstructure analysis on plain-woven textile fabrics. Composites Part A: Applied Science and Manufacturing, 39(3), 488-502. [More Information]
  • Deng, S., Zhang, J., Ye, L., Wu, J. (2008). Toughening epoxies with halloysite nanotubes. Polymer, 49(23), 5119-5127.
  • Li, F., Meng, G., Ye, L., Chen, P. (2008). Wavelet Transform-based Higher-order Statistics for Fault Diagnosis in Rolling Element Bearings. Journal of Vibration and Control, 14(11), 1691-1709.
  • Su, Z., Wang, X., Zhiping, C., Ye, L. (2007). A hierarchical data fusion scheme for identifying multi-damage in composite structures with a built-in sensor network. Smart Materials and Structures, 16, 2067-2079.
  • Yang, C., Su, Z., Ye, L., Zhou, L., Hodgson, P. (2007). A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics. Key Engineering Materials, 334-335, 1141-1144.
  • Su, Z., Yang, C., Pan, N., Ye, L., Zhou, L. (2007). Assessment of delamination in composite beams using shear horizontal (SH) wave mode. Composites Science and Technology, 67(2), 244-251. [More Information]
  • Yan, L., Wang, K., Wu, J., Ye, L. (2007). Characterization of fluoroalkylsilane monolayer on polystyrene sphere arrays after plasma treatment. Surface Science, 601(5), 1394-1402.
  • Su, Z., Wang, X., Chen, Z., Ye, L. (2007). Damage Assessment of Multi-layered Composite Structure using an Embedded Active Sensor Network. Key Engineering Materials, 334-335, 461-464.
  • Rosso, P., Ye, L. (2007). Epoxy/silica nanocomposites: Nanoparticle-induced cure kinetics and microstructure. Macromolecular Rapid Communications, 28(1), 121-126. [More Information]
  • Deng, S., Ye, L., Friedrich, K. (2007). Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures. Journal of Materials Science, 42(8), 2766-2774. [More Information]
  • Ye, Y., Chen, H., Wu, J., Ye, L. (2007). High impact strength epoxy nanocomposites with natural nanotubes. Polymer, 48(21), 6426-6433.
  • Yan, L., Wang, K., Wu, J., Ye, L. (2007). Hydrophobicity of model surfaces with closely packed nano-and micro-spheres. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 296, 123-131. [More Information]
  • Friedrich, K., Hoffmann, J., Evstatiev, M., Ye, L., Mai, Y. (2007). Improvements of stiffness and strength of bio-resorbable bone nails by the MFC-concept. Key Engineering Materials, 334-335, 1181-1184.
  • Deng, S., Rosso, P., Ye, L., Friedrich, K. (2007). Interlaminar Fracture of CF/EP Composites Modified with Nano-Silica. Solid State Phenomena, 121-123(Part 2), 1403-1406.
  • Bai, R., Chen, B., Yan, C., Ye, L., Li, Z., Chen, H. (2007). Numerical investigation of post buckling strength and failure modes in advanced grid stiffened structure under thermal-mechanical loads. Key Engineering Materials, 334-335, 613-616.
  • Friedrich, K., Klein, P., Theiler, G., Ye, L., Mai, Y. (2007). PEEK- and PTFE-based composites for tribological applications in a range between liquid helium and room temperature. Key Engineering Materials, 334-335, 597-600.
  • Ye, L., HU, X., Hoffman, M. (2007). Professor Yiu-Wing Mai. Composites Science and Technology, 67(2), 149-150. [More Information]
  • Yang, C., Su, Z., Ye, L., Lu, Y., Bannister, M. (2007). Propagation Characteristics of Lamb waves in Stringer-Stiffened Panels. Key Engineering Materials, 334-335, 637-640.
  • Lu, Y., Ye, L., Su, Z., Huang, N. (2007). Quantitative evaluation of crack orientation in aluminium plates based on Lamb waves. Smart Materials and Structures, 16(5), 1907-1914.
  • Deng, S., Hou, M., Ye, L. (2007). Temperature-dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data. Polymer Testing, 26(6), 803-813.
  • Liu, Q., Yang, C., Ding, K., Barter, S., Ye, L. (2007). The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy. Fatigue and Fracture Of Engineering Materials and Structures, 30(11), 1110-1124.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2007). Tribological properties of epoxy nanocomposites III. Characteristics of transfer film. Wear, 262, 699-706.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2007). Tribological properties of high temperature resistant polymer composites with fine particles. Tribology International, 40(7), 1170-1178.
  • Su, Z., Wang, X., Chen, Z., Ye, L., Wang, D. (2006). A built-in active sensor network for health monitoring of composite structures. Smart Materials and Structures, 15, 1939-1949.
  • Li, F., Su, Z., Ye, L., Meng, G. (2006). A correlation filtering-based matching pursuit (CF-MP) for damage identification using Lamb waves. Smart Materials and Structures, 15(6), 1585-1594.
  • Chen, Z., Ye, L., Kruckenberg, T. (2006). A micromechanical compaction model for woven fabric preforms. Part I: Single layer. Composites Science and Technology, 66(16), 3254-3262. [More Information]
  • Chen, Z., Ye, L. (2006). A micromechanical compaction model for woven fabric preforms. Part II: Multilayer. Composites Science and Technology, 66(16), 3263-3272. [More Information]
  • Fu, S., Pan, Q., Huang, C., Yang, G., Liu, X., Ye, L., Mai, Y. (2006). A preliminary study on cryogenic mechanical properties of epoxy blend matrices and SiO2/epoxy nanocomposites. Key Engineering Materials, 312, 211-216.
  • Pan, N., Su, Z., Ye, L., Zhou, L., Lu, Y. (2006). A quantitative identification approach for delamination in laminated composite beams using digital damage fingerprints (DDFs). Composite Structures, 75(1-4), 559-570.
  • Rosso, P., Ye, L., Friedrich, K., Sprenger, S. (2006). A toughened epoxy resin by silica nanoparticle reinforcement. Journal of Applied Polymer Science, 100(3), 1849-1855. [More Information]
  • Meng, G., Ye, L., Dong, X., Wei, K. (2006). Closed loop finite element modeling of piezoelectric smart structures. Shock and Vibration, 13(1), 1-12.
  • Lu, Y., Ye, L., Su, Z. (2006). Crack identification in aluminium plates using Lamb wave signals of a PZT sensor network. Smart Materials and Structures, 15(3), 839-849.
  • Chen, P., Shen, Z., Xiong, J., Yang, S., Fu, S., Ye, L. (2006). Failure mechanisms of laminated composites subjected to static indentation. Composite Structures, 75(1), 489-495. [More Information]
  • Deng, S., Ye, L. (2006). Fracture behaviours of nano-silica modified epoxies at elevated temperatures. Key Engineering Materials, 312, 243-248.
  • Yi, L., Mai, Y., Ye, L. (2006). Fracture properties and characteristics of sisal textile reinforced epoxy composites. Key Engineering Materials, 312, 167-172.
  • Lu, L., Lai, M., Lim, S., Chua, B., Yan, C., Ye, L. (2006). From waste to high strength alloy - recycling of magnesium chips. Zeitschrift fur Metallkunde, 97(2), 169-173.
  • Su, Z., Ye, L., Lu, Y. (2006). Guided Lamb waves for identification of damage in composite structures: A review. Journal of Sound and Vibration, 295(3-5), 753-780.
  • Ye, L., Su, Z., Yang, C., He, Z., Wang, X. (2006). Hierarchical development of training database for artificial neural network-based damage identification. Composite Structures, 76(3), 224-233. [More Information]
  • Yan, L., Wang, K., Wu, J., Ye, L. (2006). Hydrophobicity of model surfaces with loosely packed polystyrene spheres after plasma etching. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 110(23), 11241-11246.
  • Yu, X., Cartwright, B., McGuckin, D., Ye, L., Mai, Y. (2006). Intra-ply shear locking in finite element analyses of woven fabric forming processes. Composites Part A: Applied Science and Manufacturing, 37(5), 790-803. [More Information]
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2006). Multilevel decision fusion in a distributed active sensor network for structural damage detection. Structural Health Monitoring: an international journal, 5(1), 45-58.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). Re-evaluation of fragmentation test based on the stress singularity of interface end. Composite Interfaces, 13(1), 67-88.
  • Ding, K., Ye, L. (2006). Simulation of multiple laser shock peening of a 35CD4 steel alloy. Journal of Materials Processing Technology, 178(1-3), 162-169. [More Information]
  • Yang, C., Ye, L., Su, Z., Bannister, M. (2006). Some aspects of numerical simulation for Lamb wave propagation in composite laminates. Composite Structures, 75(1-4), 267-275.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). Specimen design for IFSS measurement in fiber pullout test. Key Engineering Materials, 312, 149-154.
  • Ratinac, K., Gilbert, R., Ye, L., Jones, A., Ringer, S. (2006). The effects of processing and organoclay properties on the structure of poly(methyl methacrylate)-clay nanocomposites. Polymer, 47, 6337-6361.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). The reliability of fragmentation test. Key Engineering Materials, 312, 155-160.
  • Su, Z., Ye, L. (2005). A fast damage locating approach using digital damage fingerprints extracted from Lamb wave signals. Smart Materials and Structures, 14(5), 1047-1054.
  • Zhang, X., Wang, C., Ye, L., Mai, Y. (2005). A study of the crack wake closure/opening behaviour of short fatigue cracks and its influence on crack growth. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 406, 195-204.
  • Huang, C., Fu, S., Zhang, Y., Lauke, B., Li, L., Ye, L. (2005). Cryogenic properties of SiO2/epoxy nanocomposites. Cryogenics, 45(6), 450-454. [More Information]
  • Ye, L., Chen, Z., Lu, M., Hou, M. (2005). De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites. Composites Part A: Applied Science and Manufacturing, 36(7), 915-922. [More Information]
  • Su, Z., Ye, L. (2005). Digital Damage Fingerprints (DDF) and its application in quantitative damage identification. Composite Structures, 67(2), 197-204. [More Information]
  • Yan, L., Mai, Y., Ye, L. (2005). Effects of fibre surface treatment on fracture-mechanical properties of sisal-fibre composites. Composite Interfaces, 12(1-2), 141-163.
  • Su, Z., Ling, H., Zhou, L., Lau, K., Ye, L. (2005). Efficiency of genetic algorithm and artificial network for evaluating delamination in composite structures using fibre Bragg grating sensors. Smart Materials and Structures, 14, 1541-1553.
  • Chen, Q., Fan, H., Ye, L., Ringer, S., Sun, J., Shen, J., McCartney, D. (2005). Enhanced glass forming ability of Fe-Co-Zr-Mo-W-B alloys with Ni addition. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 402(1-2), 188-192.
  • Yu, X., Ye, L., Mai, Y., Wright, S., McGuckin, D., Paton, R. (2005). Finite element simulations of double-diaphragm forming process: comparison with experimental trials. European Finite Element Revue (Revue Europeenne de Mecanique Numerique, 14, 633-651.
  • Kim, K., Ye, L., Yan, C. (2005). Fracture behavior of polyetherimide (PEI) and interlaminar fracture of CF/PEI laminates at elevated temperatures. Polymer Composites, 26(1), 20-28. [More Information]
  • Ye, L., Lu, Y., Su, Z., Meng, G. (2005). Functionalized composite structures for new generation airframes: a review. Composites Science and Technology, 65(9), 1436-1446. [More Information]
  • Shen, J., Zou, J., Ye, L., Lu, Z., Xing, D., Yan, M., Sun, J. (2005). Glass-forming ability and thermal stability of a new bulk metallic glass in the quaternary Zr-Cu-Ni-Al system. Journal of Non-Crystalline Solids, 351(30-32), 2519-2523. [More Information]
  • Kim, K., Ye, L. (2005). Influence of matrix and interface on transverse mechanical properties of CF-PEI thermoplastic composites at elevated temperatures. Journal of Reinforced Plastics and Composites, 24(4), 429-445.
  • Su, Z., Ye, L. (2005). Lamb Wave Propagation-based Damage Identification for Quasi-isotropic CF/EP Composite Laminates Using Artificial Neural Algorithm: Part I - Methodology and Database Development. Journal of Intelligent Material Systems and Structures, 16(2), 97-111. [More Information]
  • Su, Z., Ye, L. (2005). Lamb Wave Propagation-based Damage Identification for Quasi-isotropic CF/EP Composite Laminates Using Artificial Neural Algorithm: Part II - Implementation and Validation. Journal of Intelligent Material Systems and Structures, 16(2), 113-125. [More Information]
  • Yuan, Q., Bateman, S., Ye, L. (2005). Mechanical and crash behaviour of sheet moulding compound materials. Advanced Composites Letters, 14(1), 7-14.
  • Kim, K., Curiskis, J., Ye, L., Fu, S. (2005). Mode-I interlaminar fracture behaviour of weft-knitted fabric reinforced composites. Composites Part A: Applied Science and Manufacturing, 36(7), 954-964. [More Information]
  • Su, Z., Ye, L. (2005). Quantitative damage prediction for composite laminates based on wave propagation and artificial neural networks. Structural Health Monitoring: an international journal, 4(1), 57-66.
  • Yu, X., Ye, L., Mai, Y. (2005). Spurious wrinkles in forming simulations of woven fabric. International Journal of Forming Processes, 8, 141-155.
  • Shen, J., Wang, G., Sun, J., Stachurski, Z., Yan, C., Ye, L., Zhou, B. (2005). Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region. Intermetallics, 13(1), 79-85.
  • Yan, C., Ye, L., Yan, L., Mai, Y., Lu, L., Lai, M. (2005). Synthesis and Mechanical Properties of Nanostructured Mg-Al-Nd Alloys. Advanced Materials Research, 9, 93-100.
  • Dong, X., Meng, G., Li, H., Ye, L. (2005). Vibration analysis of a stepped laminated composite Timoshenko beam. Mechanics Research Communications, 32(5), 572-581.
  • Su, Z., Ye, L. (2004). An Intelligent Signal Processing And Pattern Recognition Technique For Defect Identification Using An Active Sensor Network. Smart Materials and Structures, 13(4), 957-969.
  • Zhang, X., Galea, S., Ye, L., Mai, Y. (2004). Characterization Of The Effects Of Applied Electric Fields On Fracture Toughness And Cyclic Electric Field Induced Fatigue Crack Growth For Piezoceramic Pic 151. Smart Materials and Structures, 13(1), N9-N16.
  • Yan, C., Ye, L., Mai, Y. (2004). Effect Of Constraint On Tensile Behavior Of An Az91 Magnesium Alloy. Materials Letters, 58(25), 3219-3221.
  • Chen, Z., Ye, L., Liu, H. (2004). Effective Permeabilities Of Multilayer Fabric Preforms In Liquid Composite Moulding. Composite Structures, 66, 351-357. [More Information]
  • Kim, K., Ye, L. (2004). Effects Of Thickness And Environmental Temperature On Fracture Behaviour Of Polyetherimide (Pei). Journal of Materials Science, 39(4), 1267-1276.
  • Su, Z., Ye, L. (2004). Fundamental Lamb Mode-Based Delamination Detection For Cf/Ep Composite Laminates Using Distributed Piezoelectrics. Structural Health Monitoring: an international journal, 3(1), 43-68.
  • Hu, Y., Zhang, H., Yan, C., Ye, L., Ding, B., Hu, Z. (2004). Hydrogenation Mechanisms Of Mg During Reaction Ball Milling. Journal of Materials Science, 39(4), 1455-1457.
  • Kim, K., Ye, L., Phao, K. (2004). Interlaminar Fracture Toughness Of Cf/Pei And Gf/Pei Composites At Elevated Temperatures. Applied Composite Materials, 11(3), 173-190.
  • Kim, K., Ye, L. (2004). Interlaminar Fracture Toughness Of Cf/Pei Composites At Elevated Temperatures: Roles Of Matrix Toughness And Fibre/Matrix Adhesion. Composites Part A: Applied Science and Manufacturing, 35(4), 477-487. [More Information]
  • Su, Z., Ye, L. (2004). Lamb Wave-Based Quantitative Identification Of Delamination In Cf/Ep Composite Structures Using Artificial Neural Algorithm. Composite Structures, 66(38443), 627-637. [More Information]
  • Hu, Y., Yan, C., Zhang, H., Ye, L., Hu, Z. (2004). Preparation And Hydrogenation Characteristics Of Mg-30 Wt.% Ti37.5V25Cr37.5 Composite. Journal of Alloys and Compounds, 375(1-2), 265-269. [More Information]
  • Hu, Y., Zhang, H., Yan, C., Ye, L., Ding, B., Hu, Z. (2004). Preparation And Hydrogenation Of Body-Centered-Cubic Ticr2 Alloy. Materials Letters, 58(5), 783-786.
  • Su, Z., Ye, L. (2004). Selective Generation Of Lamb Wave Modes And Their Propagation Characteristics In Defective Composite Laminates. Institution of Mechanical Engineers. Proceedings. Part L: Journal of Materials: Design and Applications, 218(2), 95-110.
  • Lu, M., Ye, L., Mai, Y. (2004). Thermal De-Consolidation Of Thermoplastic Matrix Composites - Ii. 'Migration' Of Voids And 'Re-Consolidation'. Composites Science and Technology, 64(2), 191-202.
  • Xiongzhu, B., Ye, L., Su, Z., Wang, C. (2003). Active control of a flexible smart beam using a system identification technique based on ARMAX. Smart Materials and Structures, 12, 845-850.
  • Yan, C., Yan, L., Ye, L., Lu, L., Lai, M., Mai, Y. (2003). Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys. Materials Science Forum, 437-438, 113-116.
  • Ding, K., Ye, L. (2003). FEM SIMULATION OF TWO SIDED LASER SHOCK PEENING OF THIN SECTIONS OF Ti-6AI-4V ALLOY. Surface Engineering, 19(2), 127-133.
  • Lu, D., Mai, Y., Li, R., Ye, L. (2003). Impact Strength and Crystallization Behavior of Nano-SiOx/Poly (phenylene sulfide) (PPS) Composites with Heat-treated PPS. Macromolecular Materials and Engineering, 288(9), 693-698.
  • Ji, X., Dai, Y., Zheng, B., Ye, L., Mai, Y. (2003). Interface end theory and re-evaluation in interfacial strength test methods. Composite Interfaces, 10(6), 567-580.
  • Yang, M., Wang, K., Ye, L., Mai, Y., Wu, J. (2003). Low density polyethylene-polypropylene blends. Part 1-Ductility and tensile properties. Plastics Rubber And Composites, 32(1), 21-26.
  • Yang, M., Wang, K., Ye, L., Mai, Y., Wu, J. (2003). Low density polyethylene-polypropylene blends. Part 2- Strengthening and toughening with copolymer. Plastics Rubber And Composites, 32(1), 27-32.
  • Balasuriya, P., Ye, L., Mai, Y. (2003). Morphology and mechanical properties of reconstituted wood board waste-polyethylene composites. Composite Interfaces, 10(2-3), 319-341.
  • Su, Z., Ye, L., Bu, X., Wang, X., Mai, Y. (2003). Quantitative assessment of damage in a structural beam based on wave propagation by impact excitation. Structural Health Monitoring: an international journal, 2(1), 27-40.
  • Yan, L., Wang, K., Ye, L. (2003). Super hydrophobic property of PVDF/CaCO(3) nanocomposite coatings. Journal of Materials Science, 22(23), 1713-1717.
  • Ding, K., Ye, L. (2003). Three- dimensional dynamic finite element analysis of multiple laser shock peening processes. Surface Engineering, 19(5), 351-358.
  • Su, Z., Ye, L., Bu, X. (2002). A damage identificatin technique for CF/EP composite laminates using distributed piezoelectric transducers. Composite Structures, 57(1-4), 465-471.
  • Dai, S., Ye, L. (2002). Characteristics of CF/PEI tape winding process with on-line consolidation. Composites Part A: Applied Science and Manufacturing, 33(9), 1227-1238.
  • Chen, Z., Yu, S., Lu, M., Ye, L. (2002). Effective properties of layered magneto-electro-elastic composites. Composite Structures, 57(1-4), 177-182.
  • Chen, Z., Yu, S., Feng, X., Lu, M., Ye, L. (2002). Evaluation of thermo-elastic properties of three-dimensional orthogonal woven composites. Composites Part B: Engineering, 33(3), 241-251.
  • Dai, S., Ye, L. (2002). GF/PP tape winding with on-line consolidation. Journal of Reinforced Plastics and Composites, 21(1), 71-90.
  • Zhang, X., Wang, C., Ye, L., Mai, Y. (2002). In situ investigation of small fatigue crack growth in poly-crystal and single-crystal aluminium alloys. Fatigue and Fracture Of Engineering Materials and Structures, 25(2), 141-150.
  • Montross, C., Wei, T., Ye, L., Clark, G., Mai, Y. (2002). Laser shock processing and its effects on microstructure and properties of metal alloys: a review. International Journal Of Fatigue, 24(10), 1021-1036.
  • Balasuriya, P., Ye, L., Mai, Y., Wu, J. (2002). Mechanical properties of wood flake-polyethylene composites. II. Interface modification. Journal of Applied Polymer Science, 83(12), 2505-2521. [More Information]
  • Yan, C., Xiao, K., Ye, L., Mai, Y. (2002). Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. Journal of Materials Science, 37(5), 921-927.
  • Zhang, X., Li, J., Wang, C., Ye, L., Mai, Y. (2002). Prediction of short fatigue crack propagation behaviour by characterization of both plasticity and roughness induced crack closures. International Journal Of Fatigue, 24(5), 529-536.
  • Ye, L., Lu, M., Mai, Y. (2002). Thermal de-consolidation of thermoplastic matrix composites - I. Growth of voids. Composites Science and Technology, 62(16), 2121-2130.
  • Lu, M., Ye, L., Chen, Z., Zhu, D. (2001). A homogenisation scheme and its application to evaluation of elastic properties of three-dimensional braided composites. Composites Part B: Engineering, 32, 67-86.
  • Ageorges, C., Ye, L., Hou,, M. (2001). Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review. Composites Part A: Applied Science and Manufacturing, 32, 839-857.
  • Afaghi-Khatibi, A., Ye, L., Mai, Y. (2001). An experimental study of the influence of fibre-matrix interface on fatigue tensile strength of notched composite laminates. Composites Part B: Engineering, 32, 371-377.
  • Lu, M., Mai, Y., Ye, L. (2001). Crack-tip field for fast fracture of an elastic-plastic-viscoplastic material incorporated with quasi-brittle damage. Part 1. Large damage regime. International Journal of Solids and Structures, 38, 9383-9402.
  • Lu, M., Mai, Y., Ye, L. (2001). Crack-tip field for fast fracture of an elastic-plastic-viscoplastic material incorporated with quasi-brittle damage. Part 2. Small damage regime. International Journal of Solids and Structures, 38, 9403-9420.
  • Yan, C., Mai, Y., Ye, L. (2001). Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75, 27-44.
  • Yan, C., Mai, Y., Yuan, Q., Ye, L., Sun, J. (2001). Effects of substrate materials on fracture toughness measurement in adhesive joints. International Journal of Mechanical Sciences, 43, 2091-2102.
  • Zhang, X., Ye, L., Mai, Y., Wang, C., Chen, W. (2001). Investigation of short fatigue cracks in nickel-based single crystal superalloy SC16 by in-situ SEM fatigue testing. Scripta Materialia, 44, 2443-2448.
  • Balasuriya, P., Ye, L., Mai, Y. (2001). Mechanical properties of wood flake-polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour. Composites Part A: Applied Science and Manufacturing, 32, 619-629.
  • Lu, M., Mai, Y., Ye, L. (2001). On fast fracture in an elastic-(plastic)-viscoplastic solid 1. Stress and velocity fields with loading and unloading processes. International Journal of Fracture, 111, 343-359.
  • Yuan, Q., Ye, L., Mai, Y., Hou,, M. (2001). Resistance welding of carbon fiber reinforced polyetherimide composite. Journal of Thermoplastic Composite Materials, 14, 2-19.
  • Ageorges, C., Ye, L. (2001). Resistance welding of metal/thermoplastic composite joints. Journal of Thermoplastic Composite Materials, 14, 449-475.
  • Ageorges, C., Ye, L. (2001). Resistance welding of thermosetting composite/thermoplastic composite joints. Composites Part A: Applied Science and Manufacturing, 32, 1603-1612.
  • Ageorges, C., Ye, L. (2001). Simulation of impulse resistance welding for thermoplastic matrix composites. Applied Composite Materials, 8, 133-147.

Conferences

  • Zhang, J., Deng, S., Ye, L., Zhang, Z. (2013). Interlaminar Fracture Toughness and Fatigue Delamination Growth of CF/EP Composites with Matrices Modified by Nano-silica and CTBN rubber. 13th International Congress on Fracture (ICF13), Beijing, China: Chinese Society of Theoretical and Applied Mechanics.
  • Wang, H., Chang, L., Ye, L., Williams, J. (2013). Micro-cutting tests: a new way to measure the fracture toughness and yield stress of polymeric nanocomposites. 13th International Congress on Fracture (ICF13), Beijing, China: Chinese Society of Theoretical and Applied Mechanics.
  • Hattori, G., Mustapha, S., Ye, L., Saez, A. (2012). An experimental approach for crack identification/assessment in piezoelectric materials. 10th World Congress on Computational Mechanics 2012, Sao Paulo: Wiley.
  • Ye, L., Su, Z., Lu, Y. (2012). Artificial intelligence for damage assessment in structures using digital damage fingerprints extracted from guided wave signals. 5th International Conference from Scientific Computing to Computational Engineering (5th IC-SCCE), Patras, Greece: Laboratory of Fluid Mechanics and Energy.
  • Ye, L., Zhang, D., Mustapha, S., Wang, D. (2012). Damage Assessment in Composite Laminates using Tomography Based on Sensing Network. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.
  • Ye, L., Zhang, D., Wang, D. (2012). Electrical Resistivity Tomography for Damage Assessment in GFRP Laminates with Conductive Nanoparticles. First International Conference on Mechatronic System and Measurement Technology (ICMSMT), Monmouth Junction: Science Press USA.
  • Ye, L., Zhang, D., Wang, D. (2012). Interlaminar fracture and impact damage assessment by electrical resistivity tomography in GFRP laminates with conductive nanoparticles. 15th European Conference on Composite Materials (ECCM15), Venice: ECCM15.
  • Wang, H., Chang, L., Ye, L., Williams, J. (2012). Measuring Fracture Toughness of Epoxy Nanocomposites Using Orthogonal Cutting Tests. 2nd/2012 International Conference on Materials and Products Manufacturing Technology (MPMT 2012), Guangzhou: Web.
  • Wang, H., Chang, L., Ye, L. (2012). Measuring the Fracture Toughness of Polymer Nanocomposites from Cutting Tests. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.
  • Chang, L., Friedrich, K., Ye, L. (2012). New insights into the tribological effects of nanoparticles on the sliding wear performance of polymer nanocomposites. 15th European Conference on Composite Materials (ECCM15), Venice: ECCM15.
  • Ye, L., Su, Z., Lu, Y. (2012). Quantitative damage assessment using guided ultrasonic wave signals. 2012 International Symposium on Structural Integrity (ISSI2012), Shanghai: East China University of Science and Technology Press.
  • Zhang, J., Deng, S., Ye, L. (2012). Roles of rigid nano-particles and CTBN rubber in toughening DGEBA epoxies with different cross-linking densities. ACUN-6 The Sixth International Composites Conference, Sydney: Monash University.
  • Wang, H., Chang, L., Ye, L. (2012). Study of the Fracture Toughness of Nanoparticles Modified Epoxy by Cutting Tests. ACUN-6 The Sixth International Composites Conference, Sydney: Monash University.
  • Lu, Y., Li, J., Mustapha, S., Ye, L. (2012). Time reversal of guided waves for damage detection in rebar-reinforced concrete beams. Australasian Structural Engineering Conference 2012, Victoria, Australia: Engineers Australia.
  • Tang, L., Zhang, H., Sprenger, S., Ye, L., Zhang, Z. (2012). Toughening of Epoxy Polymers with Rigid and Soft Particles. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.
  • Mustapha, S., Wang, D., Ye, L. (2011). Debonding detection in CF/EP sandwich structures using active sensor network. 18th International Conference on Composite Materials (ICCM18), Korea: The Korean Society for Composite Materials.
  • Chang, L., Friedrich, K., Ye, L. (2011). Development of the Wear Resistant Polymeric Hybrid Composites Using Nanoparticles. 6th China International Symposium on Tribology, China: State Key Laboratory of Solid Lubrication (Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences).
  • Wang, D., Lu, Y., Tang, Y., Ye, L. (2011). Monitoring of delamination onset in composite laminates using lamb signals. 18th International Conference on Composite Materials (ICCM18), Korea: The Korean Society for Composite Materials.
  • Chang, L., Friedrich, K., Ye, L. (2010). A Study on the Transfer Film in Sliding Contact between Polymeric Composites and Steel Disks Using Nanoindentation. The Seventh Asian-Australasian Conference on Composite Materials (ACCM7), Taiwan: Industrial Technology Research Institute.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2010). Debonding Assessment in Sandwich CF/EP Composite Beams Using Surface Mounted PZT Transducers. 5th European Workshop on Structural Health Monitoring, Pennsylvania, USA: DEStech Publications Inc.
  • Lu, Y., Ye, L., Li, J., Wang, D. (2010). Piezo-activated Ultrasonic Waves for Damage Detection in Rebar-Reinforced Concrete Beams. 5th World Conference on Structural Control and Monitoring, Tokyo: N/A.
  • Wang, D., Lu, Y., Li, F., Ye, L. (2010). Shannon Entropy and Kurtosis Analyses of Ultrasonic Wave Signals from Active Sensor Network for Damage Identification in Composite Structures. The Seventh Asian-Australasian Conference on Composite Materials (ACCM7), Taiwan: Industrial Technology Research Institute.
  • Deng, S., Zhang, J., Ye, L. (2009). Effects of Chemical Treatment and Mixing Methods on Fracture Behaviour of Halloysite-Epoxy Nanocomposites. Seventeenth International Conference on Composite Materials (ICCM17), Edinburgh, UK: The Institute of Materials, Minerals and Mining, UK.
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2009). Fatigue Crack Identification in Thick Steel Beam Using Guided Waves. 7th International Workshop on Structural Health Monitoring IWSHM 2009, United States: DEStech Publications Inc.
  • Lu, X., Lu, M., Zhou, L., Su, Z., Cheng, L., Ye, L., Meng, G. (2009). Guided wave propagation based damage detection in welded rectangular tubular structures. 2nd International Conference on Smart Materials and Nanotechnology in Engineering SMN 2009, United States: SPIE - International Society for Optical Engineering. [More Information]
  • Heng, D., Ogawa, K., Cutler, D., Chan, H., Raper, J., Ye, L., Yun, J. (2009). Investigating the Unique Dissolution Behaviour of Nanoparticles. 6th International Conference for Conveying and Handling of Particulate Solids (CHoPS+ICBMH), Barton, ACT Australia: Engineers Australia.
  • Lu, Y., Ye, L., Wang, D., Wang, X., Su, Z. (2009). Lamb Wave Signals for Damage Detection Using a Probability-Based Imaging Algorithm. 7th International Workshop on Structural Health Monitoring IWSHM 2009, United States: DEStech Publications Inc.
  • Ye, L., Lu, Y., Wang, D. (2008). Correlation-Based Damage Detection in a Composite Panel of Multiple Stiffeners Using Guided Wave Signals. International Conference on Intelligent Textiles ICIT2008, Korea: International Conference on Intelligent Textiles.
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2008). Damage detection in thick steel beam using lamb waves. ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), USA: American Society of Mechanical Engineers (ASME).
  • Wang, D., Ye, L., Lu, Y., Li, F. (2008). Diagnostics of damage presence using tomographically constructed probability distribution based on Lamb wave signals. The 4th European Workshop on Structural Health Monitoring 2008, Lancaster, Pennsylvania, USA: DEStech Publications Inc.
  • Ye, L., Rosso, P., Deng, S., Wu, J. (2008). Fracture of Epoxy Nanocomposites - Role of Particles. The Eighth International Conference on Fundamentals of Fracture (ICFF VIII), China: N/A.
  • Lu, X., Li, F., Meng, G., Ye, L., Lu, Y. (2008). Lamb Wave Based Damage Identification in Structures with Complex Geometry. ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), USA: American Society of Mechanical Engineers (ASME).
  • Zhang, J., Deng, S., Ye, L., Wu, J. (2008). Mechanical Performance of Halloysite-Epoxy Nanocomposites. The 6th Asia-Australasian Conference on Composite Materials (ACCM-6), Kyoto, Japan: The Society of Materials Science, Japan.
  • Large, M., Moran, J., Ye, L. (2008). The role of material properties in the strain testing using microstructured Polymer Optical Fibres (mPOF). 19th International Conference on Optical Fibre Sensors (OFS 19), USA: SPIE - International Society for Optical Engineering.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2007). Detection and assessment of debonding in sandwich CF/EP composite structures using Lamb waves. 14th International Conference on Composite Structures.
  • Feng, S., Hao-ran, C., Ye, L. (2007). Nonlinear dynamic stability analysis for piezoelectric composite laminates with debonded interfaces. Sixteenth INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM-16,2007), Japan: Japan Society for Composite Materials.
  • Su, Z., Cheng, L., Ye, L. (2007). Vibration-based structural condition monitoring using concept of digital damage fingerprints (DDF). Inter-noise 2007, UK: Multi-Science Publishing Co Ltd.
  • Yan, C., Law, S., Ong, H., Ye, L. (2006). Effects of moisture and thermal shock on mechanical behaviour of silica optical fibres. OECC Taiwan 2006 - the Eleventh OptoElectronics and Communications Conference, Kaohsiung, Taiwan, R.O.C.: Technical Digest CD-ROM.
  • Rosso, P., Riches, J., Ye, L. (2006). Interphase phenomena in novel CFRP's. ACUN-5 International Composites Conference "Developments in Composites: Advanced, Infrastructural, Natural, and Nano-Composites", Australia: University of NSW (UNSW).
  • Lu, Y., Ye, L., Su, Z. (2006). Lamb Wave-Based Quantitative Crack Evaluation in Aluminium Plates. International Conference and Exhibition on Structural Integrity and Failure (SIF2006). Institute of Materials Engineering Australasia.
  • Friedrich, K., Schmitt, S., Stephan, J., Ye, L. (2006). Mechanical property profile of a new poly-paraphenylene-copolymer (PPP). ACUN-5 International Composites Conference "Developments in Composites: Advanced, Infrastructural, Natural, and Nano-Composites", Australia: University of NSW (UNSW).
  • Yan, C., Yu, H., Ye, L., Canning, J., Ashton, B. (2006). Tensile Behavior of photonic crystal fibres. Asian Pacific Conference on Fracture and Strength (APCFS 06), China: Chinese Mechanical Engineering Society.
  • Su, Z., Ye, L., Ling, H., Zhou, L., Lau, K. (2005). Comparison of genetic algorithm and artificial neural network for damage detection of composite structures. 15th International Conference on Composite Materials (ICCM-15) 2005. No Publisher - CD-ROM only.
  • Yu, X., Ye, L., Mai, Y., Wright, S., McGuckin, D., Paton, R. (2005). Composite forming simulations: From fundamental research to industrial application. SAMPE 2005 Long Beach Conference, Long Beach, CA, United States: Soc. for the Advancement of Material and Process Engineering, Covina, CA 91724-3748, United States.
  • Deng, S., Ye, L., Riches, J., Rosso, P. (2005). Interlaminar Fracture of CF/EP Composites Modified with Nano-Silica. China International Conference on Nanoscience and Technology (ChinaNANO2005), : Trans Tech Publications.
  • Yan, C., Wang, X., Ye, L., Digweed, K., Canning, J. (2005). Mechanical Failure of Holey Optical Fibres in Tension. 2005 IEEE LEOS Annual Meeting Conference, Sydney: (IEEE) Institute of Electrical and Electronics Engineers.
  • Yang, C., Ye, L., Su, Z. (2005). Mechanistic models for PZT actuators/sensors of wave propogation in plate-like structures. Australian Structural Engineering Conference (ASEC-2005), Sydney, Australia: Institute of Engineers Australia.
  • Yang, C., Ye, L., Su, Z. (2005). Numerical Simulation for Lamb Wave-based Structural Health Monitoring (SHM) Technique. The Australian Structural Engineering Conference 2005, Newcastle, NSW: Cannot be located.
  • Zhang, X., Shi, Y., Ye, L., Mai, Y. (2004). A Tin-Based Composite Solder Reinforced By Nano-Sized Particulates And Its Soldering Ability. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2004). Bayesian Inference For Structural Damage Identification With A Distributed Sensor Network. 2nd Australasian Workshop on Structural Health Monitoring, Clayton, Victoria: Australasian Workshop on Structural Health Monitoring.
  • Shen, Z., Yang, S., Fu, S., Ye, L. (2004). Characterization Of Damage Resistance And Damage Tolerance Of Composite Materials. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Chen, Z., Ye, L., Kruckenberg, T. (2004). Compaction Of Single Layer Plain Weave Fabric Preform. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Nguyen, M., Wang, X., Su, Z., Ye, L. (2004). Damage Identification For Composite Structures With A Bayesian Network. International Conference on Intelligent Sensors, Sensor Networks and Information Processing. (IEEE) Institute of Electrical and Electronics Engineers.
  • Yan, C., Ye, L., Mai, Y. (2004). Effect Of Constraint On The Tensile Behavior Of An AZ91 Magnesium Alloy. International Conference on Structural Integrity and Fracture - SIF 2004, Brisbane, Australia: Australian Fracture Group.
  • Zhang, X., Yuan, Q., Ngatimin, W., Whitbourn, J., Ye, L. (2004). Environment Effect Of Natural Sisal Fibre Reinforced Epoxy Composites Manufactured By Resin Transfer Moulding. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Yu, X., Ye, L., McGuckin, D. (2004). Evaluation Of Intra-Ply Shearing Stiffness For A Plain Weave Fabric Prepreg. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2004). Information Fusion In Distributed Sensor Network For Structural Damage Detection. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Ji, X., Dai, Y., Ye, L., Mai, Y. (2004). Interface End Theory and Fragmentation Test. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Lu, Y., Ye, L., Su, Z. (2004). Lamb Wave-Based Damage Detection For Aluminium Alloy Structure Using Active Sensor Network. 2nd Australasian Workshop on Structural Health Monitoring, Clayton, Victoria: Australasian Workshop on Structural Health Monitoring.
  • Choupani, N., Ye, L., Mai, Y. (2004). Mixed-Mode Fracture Of A CF/PEI Composite Material. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Yan, C., Ye, L., Raviprasad, K., Lai, M., Lu, L. (2004). Origin Of Ductility Of Nanostructured Mg Alloys. The 13th International Conference on Processing and Fabrication of Advanced Materials (PFAM XIII), Singapore: Stallion Press.
  • Huang, N., Ye, L., Su, Z. (2004). Parameterised Modelling Technique And Its Application To Artificial Neural Network-Based Structural Health Monitoring. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Li, Y., Mai, Y., Ye, L. (2004). Permeability Of Sisal Textile Reinforced Composites By Resin Transfer Molding. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Hu, Y., Yan, C., Zhang, H., Ye, L., Hu, Z. (2004). Preparation Of Mg-Based Hydrogen Storage Nanocomposite By Reaction Ball Milling. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Ye, L., Mai, Y., Su, Z. (2004). Proceedings Edited: The 4Th Asian-Australasian Conference On Composite Materials (ACCM 4). Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Choi, Y., Su, Z., Chen, Z., Ye, L. (2004). Quantitative Nondestructive Evaluation In Composites Beam Using Piezoelectrics. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2004). Stress Singularity Analysis Of Interface End And Speciment Design For Fiber Pullout Test. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Smith, C., Johnstone, B., Lu, M., Ye, L., Mai, Y. (2004). Study On Re-Pull Force In Pultrusion Processes - I. Experimental Observations. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Lu, M., Ye, L., Mai, Y., Smith, C., Johnstone, B. (2004). Study On Re-Pull Force In Pultrusion Processes - II. Theoretical Analysis. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Law, S., Yan, C., Ye, L. (2004). Tensile Behaviour of Polymer Coated Optical Fibres. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Kruckenberg, T., Ye, L., Paton, R. (2004). The Use Of An Ultrasonic Welder To Consolidate Fibre Performs. International SAMPE Technical Conference (SAMPE 2004), CD-ROM.
  • Hou, M., Ye, L. (2004). Understanding The Thermoforming Issues Of Carbon Fibre Reinforced Polyphenylene Sulphide (Pps) Composite. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Waalib-Singh, N., Ye, L. (2003). Mechanical analysis of polymer optical fibres. World Congress on Medical Physics and Biomedical Engineering, WEB: Iupesm/Ifmbe/Iomp.
  • Ye, L., Lu, M. (2002). "Migration" of voids in thermal de-consolidation of thermoplastic matrix composites. 17th Annual Technical Conference, West Lafayette: CRC Press.
  • Su, Z., Ye, L., Bu, X., Mai, Y., Wang, X. (2002). A damage identification approach based on stress wave propagation. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Bechtold, G., Ye, L., Riches, J. (2002). A novel approach to determine permeabilities for flow processes in composite manufacturing. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Ye, L., Lu, M. (2002). A void growth model for thermoplastic matrix composites during reheating processes. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Zhang, X., Ye, L., Mai, Y., Wang, C. (2002). Characterization of the opening/closure behaviour of short fatigue cracks under cyclic loading and its influence on crack growth. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Zhang, X., Wang, C., Chen, W., Ye, L., Mai, Y. (2002). Characterization of the propagation behaviour of short fatigue cracks in nickel-based single crystal superalloy SC16. The 7th Liege Conference, Julich, Germany: Forschungszentrum Jülich.
  • Kim, K., Ye, L., Wu, J. (2002). Effect of environmental temperature on interlaminar fracture toughness of carbon fibre/polyetherimide composites. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Liang, W., Ye, L., Zhou,, L., Keren, D. (2002). Effect of moisture on interlaminar fracture behaviour of carbon fibre/epoxy composites with different fibre-matrix adhesion. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Yan, C., Mai, Y., Ye, L. (2002). Elastic-plastic-creep analysis of PBGA electronic package solder joints. The Fifth International IEEE Symposium on High Density Packaging and Component Failure Analysis in Electronics manufacturing (HDP2002), Beijing, China: (IEEE) Institute of Electrical and Electronics Engineers.
  • Su, Z., Ye, L., Bu, X. (2002). Evaluation of delamination in laminated composites based on Lamb wave modes: FEM simulation and experimental verification. First European Workshop on Structural Health Monitoring, Pennsylvania, USA: DEStech Publications Inc.
  • Bechtold, G., Ye, L., Maier, J., Pletl, F., Riches, J. (2002). Evaluation of experimental method to determine micro geometrical transverse flow permeabilities of fibre bundles. ACUN-4, Sydney: University of New South Wales.
  • Yan, C., Ye, L., Mai, Y., Jiang, F., Kang, W., Zhao, K., Sun, J. (2002). Experimental investigation on fatigue crack growth normal to a bimaterial interface. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Ding, K., Ye, L., Liu,, Q. (2002). Finite element simulation of laser shock peening on an aluminum alloy. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Su, Z., Ye, L., Bu, X. (2002). Identification of delamination in worven fabric composite laminates using surface-bonded piezoelectrics. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Bechtold, G., Ye, L. (2002). Integrity of pultruded thermoplastic composites. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Zhang, X., Ye, L., Mai, Y., Dorn, L. (2002). Study on correlation of the fracture toughness and microshear toughness for pressure vessel steels and structural steels. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Yuan, Q., Ye, L., Mai, Y. (2001). Energy absorption of sandwiched composite tubes. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Ye, L., Ageorges, C., Zhou,, L. (2001). Fusion bonding of thermoplastic composites with dissimilar materials. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Zhang, X., Ye, L., Mai, Y., Wang, C., Chen, W. (2001). Investigation of the growth behavior of microstructurally short fatigue cracks in nickel-based single crystal superalloy SC16. 10th International Conference on Fracture, Australia: UNSW Australian Defence Force Academy.
  • Ye, L., Mai, Y., Yuan, Q., Hou,, M. (2001). Manufacturing and joining of advanced thermoplastic composites. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Bechtold, G., Ye, L., Riches, J. (2001). Model for the comparison of convective and contact preheating in a thermoplastic pultrusion process. 13th International Conference on Composite Materials. Ads & Adea.
  • Li, W., Zhang, X., Mai, Y., Ye, L. (2001). Study on the effects of notch tip and crack tip plasticity on small fatigue crack growth. 10th International Conference on Fracture, Australia: UNSW Australian Defence Force Academy.

2014

  • Fu, K., Chang, L., Zheng, B., Yin, Y., Ye, L. (2014). A Method For Defining Initial Stress In Progressively Deposited Film On A Substrate. International Journal of Modern Physics B: condensed matter physics etc, 28(10), Article number 14500568. [More Information]
  • Wang, H., Chang, L., Yang, X., Yuan, L., Ye, L., Zhu, Y., Harris, A., Minett, A., Trimby, P., Friedrich, K. (2014). Anisotropy in tribological performances of long aligned carbon nanotubes/polymer composites. Carbon, 67, 38-47. [More Information]
  • Guo, Q., Ye, L., Wang, Y., Feng, H., Li, Y. (2014). Comparative assessment of surface roughness and microstructure produced in whirlwind milling of bearing steel. Machining Science and Technology, 18(2), 251-276. [More Information]
  • Mustapha, S., Lu, Y., Li, J., Ye, L. (2014). Damage detection in rebar-reinforced concrete beams based on time reversal of guided waves. Structural Health Monitoring: an international journal, 13(4), 347-358. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). Gas Transport Properties and Transport-Based Applications of Electrospun Nanofibers. Nanotechnology in Australia 2-Showcase of Early Career Research. Singapore: Pan Stanford Publishing.
  • Shou, D., Ye, L., Fan, J. (2014). Gas transport properties of electrospun polymer nanofibers. Polymer, 55(14), 3149-3155. [More Information]
  • Shou, D., Ye, L., Fan, J., Fu, K., Mei, M., Wang, H., Chen, Q. (2014). Geometry-Induced Asymmetric Capillary Flow. Langmuir, 30(19), 5448-5454. [More Information]
  • Mustapha, S., Ye, L. (2014). Leaky and non-leaky behaviours of guided waves in CF/EP sandwich structures. Wave Motion, 51(6), 905-918. [More Information]
  • Shou, D., Ye, L., Fan, J., Fu, K. (2014). Optimal Design of Porous Structures for the Fastest Liquid Absorption. Langmuir, 30(1), 149-155. [More Information]
  • Chang, L., Friedrich, K., Ye, L. (2014). Study on the Transfer Film Layer in Sliding Contact Between Polymer Composites and Steel Disks Using Nanoindentation. Journal of Tribology, 136(2), 021602-1-021602-12. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). The fastest capillary flow under gravity. Applied Physics Letters, 104(2014), 231602-1-231602-3. [More Information]
  • Shou, D., Ye, L., Fan, J. (2014). Treelike networks accelerating capillary flow. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 89(5), 1-7. [More Information]

2013

  • Ye, L., Zhang, D., Wang, D. (2013). Advanced composites with multi-functionality enhanced by nanoparticles. Advanced Materials Research, 747, 19-22. [More Information]
  • Fu, K., Yin, Y., Chang, L., Shou, D., Zheng, B., Ye, L. (2013). Analysis on multiple ring-like cracks in thin amorphous carbon film on soft substrate under nanoindentation. Journal of Physics D: Applied Physics, 46(50), 1-10. [More Information]
  • Mustapha, S., Ye, L. (2013). Damage identification and assessment in tapered sandwich structures using guided waves. Key Engineering Materials, 558, 25-38. [More Information]
  • Zhang, J., Deng, S., Wang, Y., Ye, L., Zhou, L., Zhang, Z. (2013). Effect of nanoparticles on interfacial properties of carbon fibre-epoxy composites. Composites Part A: Applied Science and Manufacturing, 55, 35-44. [More Information]
  • Shou, D., Tang, Y., Ye, L., Fan, J., Ding, F. (2013). Effective permeability of gas diffusion layer in proton exchange membrane fuel cells. International Journal of Hydrogen Energy, 38(25), 10519-10526. [More Information]
  • Lu, Y., Li, J., Ye, L., Wang, D. (2013). Guided waves for damage detection in rebar-reinforced concrete beams. Construction and Building Materials, 47, 370-378. [More Information]
  • Shou, D., Ye, L., Fan, J. (2013). Heterogeneous porous structures for the fastest liquid absorption. Proceedings of SPIE - International Society for Optical Engineering, 8793, 1-10. [More Information]
  • Tang, Y., Ye, L., Zhang, Z., Friedrich, K. (2013). Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles - A review. Composites Science and Technology, 86, 26-37. [More Information]
  • Zhang, J., Deng, S., Ye, L., Zhang, Z. (2013). Interlaminar Fracture Toughness and Fatigue Delamination Growth of CF/EP Composites with Matrices Modified by Nano-silica and CTBN rubber. 13th International Congress on Fracture (ICF13), Beijing, China: Chinese Society of Theoretical and Applied Mechanics.
  • Deng, S., Beehag, A., Hillier, W., Zhang, D., Ye, L. (2013). Kenaf–polypropylene composites manufactured from blended fiber mats. Journal of Reinforced Plastics and Composites, 32(16), 1198-1210. [More Information]
  • Lu, Y., Lu, M., Ye, L., Wang, D., Zhou,, L., Su, Z. (2013). Lamb Wave Based Monitoring of Fatigue Crack Growth Using Principal Component Analysis. Key Engineering Materials, 558, 260-267. [More Information]
  • Wang, H., Chang, L., Ye, L., Williams, J. (2013). Micro-cutting tests: a new way to measure the fracture toughness and yield stress of polymeric nanocomposites. 13th International Congress on Fracture (ICF13), Beijing, China: Chinese Society of Theoretical and Applied Mechanics.
  • Mustapha, S., Ye, L. (2013). Non-destructive evaluation (NDE) of composites: assessing debonding in sandwich panels using guided waves. In Vistasp M Karbhari (Eds.), Non-destructive evaluation (NDE) of polymer matrix composites: Techniques and applications, (pp. 238-278). Cambridge, United Kingdom: Woodhead Publishing Limited.
  • Wei, K., Ye, L., Ning, L., Liu, Y. (2013). Nonlinear dynamic response of a cracked beam under multi-frequency excitation. Advances in Vibration Engineering, 12(5), 431-446.
  • Guo, Q., Chang, L., Ye, L., Wang, Y., Feng, H., Cao, Y., Lian, Q., Li, Y. (2013). Residual Stress, Nanohardness, and Microstructure Changes in Whirlwind Milling of GCr15 Steel. Materials and Manufacturing Processes, 28(10), 1047-1052. [More Information]
  • Witt, N., Tang, Y., Ye, L., Fang, L. (2013). Silicone rubber nanocomposites containing a small amount of hybrid fillers with enhanced electrical sensitivity. Materials and Design, 45, 548-554. [More Information]
  • Zhang, J., Chang, L., Deng, S., Ye, L., Zhang, Z. (2013). Some insights into effects of nanoparticles on sliding wear performance of epoxy nanocomposites. Wear, 304(1-2), 138-143. [More Information]
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2013). Synergistic effects of nanoparticles and traditional tribofillers on sliding wear of polymeric hybrid composites. In Klaus Friedrich, Alois K. Schlarb (Eds.), Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings 2nd Edition, (pp. 49-89). Oxford, UK: Butterworth Heinemann.
  • Shou, D., Ye, L., Tang, Y., Fan, J., Ding, F. (2013). Transverse permeability determination of dual-scale fibrous materials. International Journal of Heat and Mass Transfer, 58(1-2), 532-539. [More Information]

2012

  • Wang, M., Ruan, W., Huang, Y., Ye, L., Rong, M., Zhang, M. (2012). A strategy for significant improvement of strength of semi-crystalline polymers with the aid of nanoparticles. Journal of Materials Chemistry, 22(11), 4592-4598. [More Information]
  • Hattori, G., Mustapha, S., Ye, L., Saez, A. (2012). An experimental approach for crack identification/assessment in piezoelectric materials. 10th World Congress on Computational Mechanics 2012, Sao Paulo: Wiley.
  • Ye, L., Su, Z., Lu, Y. (2012). Artificial intelligence for damage assessment in structures using digital damage fingerprints extracted from guided wave signals. 5th International Conference from Scientific Computing to Computational Engineering (5th IC-SCCE), Patras, Greece: Laboratory of Fluid Mechanics and Energy.
  • Zhang, D., Ye, L., Wang, D., Tang, Y., Mustapha, S., Chen, Y. (2012). Assessment of transverse impact damage in GF/EP laminates of conductive nanoparticles using electrical resistivity tomography. Composites Part A: Applied Science and Manufacturing, 43(9), 1587-1598. [More Information]
  • Zhang, D., Ye, L., Deng, S., Zhang, J., Tang, Y., Chen, Y. (2012). CF/EP composite laminates with carbon black and copper chloride for improved electrical conductivity and interlaminar fracture toughness. Composites Science and Technology, 72(3), 412-420. [More Information]
  • Witt, N., Ye, L., Tang, Y. (2012). Conductive rubber nanocomposites as tensile and pressure sensors. Applied Mechanics and Materials, 217-219(2012), 130-133. [More Information]
  • Ye, L., Zhang, D., Mustapha, S., Wang, D. (2012). Damage Assessment in Composite Laminates using Tomography Based on Sensing Network. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2012). Debonding detection in composite sandwich structures based on guided waves. AIAA Journal, 50(8), 1697-1706. [More Information]
  • Ye, L., Zhang, D., Wang, D. (2012). Electrical Resistivity Tomography for Damage Assessment in GFRP Laminates with Conductive Nanoparticles. First International Conference on Mechatronic System and Measurement Technology (ICMSMT), Monmouth Junction: Science Press USA.
  • Wang, D., Ye, L., Tang, Y., Lu, Y. (2012). Erratum to "Monitoring of delamination onset and growth during Mode I and Mode II interlaminar fracture tests using guided waves" [Compos Sci Technol 2011;72(2):145-51]. Composites Science and Technology, 72(4), 533. [More Information]
  • Lin, X., Shen, X., Zheng, Q., Yousefi, N., Ye, L., Mai, Y., Kim, J. (2012). Fabrication of Highly-Aligned, Conductive, and Strong Graphene Papers Using Ultralarge Graphene Oxide Sheets. ACS Nano, 6(12), 10708-10719. [More Information]
  • Tang, L., Zhang, H., Sprenger, S., Ye, L., Zhang, Z. (2012). Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles. Composites Science and Technology, 72(5), 558-565. [More Information]
  • Tang, Y., Ye, L., Deng, S., Yang, C., Yuan, W. (2012). Influences of processing methods and chemical treatments on fracture toughness of halloysite-epoxy composites. Materials and Design, 42, 471-477. [More Information]
  • Ye, L., Zhang, D., Wang, D. (2012). Interlaminar fracture and impact damage assessment by electrical resistivity tomography in GFRP laminates with conductive nanoparticles. 15th European Conference on Composite Materials (ECCM15), Venice: ECCM15.
  • Kim, K., Ye, L. (2012). Interlaminar fracture properties of weft-knitted/woven fabric interply hybrid composite materials. Journal of Materials Science, 47(20), 7280-7290. [More Information]
  • Wang, H., Chang, L., Ye, L., Williams, J. (2012). Measuring Fracture Toughness of Epoxy Nanocomposites Using Orthogonal Cutting Tests. 2nd/2012 International Conference on Materials and Products Manufacturing Technology (MPMT 2012), Guangzhou: Web.
  • Wang, H., Chang, L., Ye, L. (2012). Measuring the Fracture Toughness of Polymer Nanocomposites from Cutting Tests. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.
  • Wang, D., Ye, L., Tang, Y., Lu, Y. (2012). Monitoring of delamination onset and growth during Mode I and Mode II interlaminar fracture tests using guided waves. Composites Science and Technology, 72(2), 145-151. [More Information]
  • Chang, L., Friedrich, K., Ye, L. (2012). New insights into the tribological effects of nanoparticles on the sliding wear performance of polymer nanocomposites. 15th European Conference on Composite Materials (ECCM15), Venice: ECCM15.
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2012). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part I: Effects of concentration on morphology, liquid crystallinity and thermal properties. e-Polymers (online), 22 January 2012(008), 1-12.
  • Ye, L., Su, Z., Lu, Y. (2012). Quantitative damage assessment using guided ultrasonic wave signals. 2012 International Symposium on Structural Integrity (ISSI2012), Shanghai: East China University of Science and Technology Press.
  • Zhang, J., Deng, S., Ye, L. (2012). Roles of rigid nano-particles and CTBN rubber in toughening DGEBA epoxies with different cross-linking densities. ACUN-6 The Sixth International Composites Conference, Sydney: Monash University.
  • Wang, H., Chang, L., Ye, L. (2012). Study of the Fracture Toughness of Nanoparticles Modified Epoxy by Cutting Tests. ACUN-6 The Sixth International Composites Conference, Sydney: Monash University.
  • Lu, Y., Li, J., Mustapha, S., Ye, L. (2012). Time reversal of guided waves for damage detection in rebar-reinforced concrete beams. Australasian Structural Engineering Conference 2012, Victoria, Australia: Engineers Australia.
  • Tang, L., Zhang, H., Sprenger, S., Ye, L., Zhang, Z. (2012). Toughening of Epoxy Polymers with Rigid and Soft Particles. 8th Asian-Australasian Conference on Composite Materials (ACCM8), Hong Kong: Asian-Australasian Association for Composite Materials.

2011

  • Zhang, Z., Chen, H., Ye, L. (2011). A Stiffened Plate Element Model for Advanced Grid Stiffened Composite Plates/Shells. Journal of Composite Materials, 45(2), 187-202. [More Information]
  • Wang, Y., Zhou,, L., Wang, Z., Huang, H., Ye, L. (2011). Analysis of internal stresses induced by strain recovery in a single SMA fiber-matrix composite. Composites Part B: Engineering, 42(5), 1135-1143. [More Information]
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2011). Assessment of debonding in sandwich CF/EP composite beams using A0 Lamb wave at low frequency. Composite Structures, 93(2), 483-491. [More Information]
  • Peng, H., Ye, L., Meng, G., Sun, K., Li, F. (2011). Characteristics of elastic wave propagation in thick beams - when guided waves prevail? Journal of Theoretical and Applied Mechanics, 49(3), 807-823.
  • Tang, Y., Ye, L., Zhang, D., Deng, S. (2011). Characterization of transverse tensile, interlaminar shear and interlaminate fracture in CF/EP laminates with 10 wt% and 20 wt% silica nanoparticles in matrix resins. Composites Part A: Applied Science and Manufacturing, 42(12), 1943-1950. [More Information]
  • Sun, K., Meng, G., Ye, L., Li, F. (2011). Damage size identification of thick steel beam based on ultrasonic guided wave. Zhendong yu Chongji/Journal of Vibration and Shock, 30(9), 227-231.
  • Mustapha, S., Wang, D., Ye, L. (2011). Debonding detection in CF/EP sandwich structures using active sensor network. 18th International Conference on Composite Materials (ICCM18), Korea: The Korean Society for Composite Materials.
  • Deng, S., Hou, M., Liu, X., Qi, B., Ye, L. (2011). Determination of CTEs of cured epoxy and polyester (PET) stitching threads. Journal of Composite Materials, 45(20), 2071-2081. [More Information]
  • Chang, L., Friedrich, K., Ye, L. (2011). Development of the Wear Resistant Polymeric Hybrid Composites Using Nanoparticles. 6th China International Symposium on Tribology, China: State Key Laboratory of Solid Lubrication (Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences).
  • Bal, K., Fan, J., Sarkar, M., Ye, L. (2011). Differential spontaneous capillary flow through heterogeneous porous media. International Journal of Heat and Mass Transfer, 54(13-14), 3096-3099. [More Information]
  • Tang, Y., Deng, S., Ye, L., Yang, C., Yuan, Q., Zhang, J., Zhao, C. (2011). Effects of unfolded and intercalated halloysites on mechanical properties of halloysite-epoxy nanocomposites. Composites Part A: Applied Science and Manufacturing, 42(4), 345-354. [More Information]
  • Zhang, G., Huang, C., Zhou,, L., Ye, L., Li, W., Huang, H. (2011). Enhanced charge storage by the electrocatalytic effect of anodic TiO2 nanotubes. Nanoscale, 3(10), 4174-4181. [More Information]
  • Lu, X., Lu, M., Zhou, L., Su, Z., Cheng, L., Ye, L., Meng, G. (2011). Evaluation of welding damage in welded tubular steel structures using guided waves and a probability-based imaging approach. Smart Materials and Structures, 20(1), 015018-1-015018-15. [More Information]
  • Miao, X., Wang, D., Ye, L., Lu, Y., Li, F., Meng, G. (2011). Identification of Dual Notches Based on Time-Reversal Lamb Waves and a Damage Diagnostic Imaging Algorithm. Journal of Intelligent Material Systems and Structures, 22(17), 1983-1992. [More Information]
  • Wang, D., Lu, Y., Tang, Y., Ye, L. (2011). Monitoring of delamination onset in composite laminates using lamb signals. 18th International Conference on Composite Materials (ICCM18), Korea: The Korean Society for Composite Materials.
  • Wang, D., Ye, L., Su, Z., Lu, Y. (2011). Quantitative identification of multiple damage in laminated composite beams using A0 Lamb mode. Journal of Composite Materials, 45(20), 2061-2069. [More Information]
  • Tang, Y., Yang, C., Gao, P., Ye, L., Zhao, C., Lin, W. (2011). Rheological Study on High-Density Polyethylene/Organoclay Composites. Polymer Engineering and Science, 51(1), 133-142. [More Information]
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Wang, Y., Zhou,, L., Wang, Z., Huang, H., Ye, L. (2011). Stress distributions in single shape memory alloy fiber composites. Materials and Design, 32(7), 3783-3789. [More Information]
  • Wei, K., Bai, Q., Meng, G., Ye, L. (2011). Vibration characteristics of electrorheological elastomer sandwich beams. Smart Materials and Structures, 20(5), 1-8. [More Information]

2010

  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). A Comparative Study of Thermotropic LCP and Organoclay as Fillers in High Molecular Mass Polyethylene with Different Blending Sequences. Polymer Engineering and Science, 50(8), 1679-1688. [More Information]
  • Wang, D., Ye, L., Lu, Y., Li, F. (2010). A damage diagnostic imaging algorithm based on the quantitative comparison of Lamb wave signals. Smart Materials and Structures, 19(6), 065008-1-065008-12.
  • Chang, L., Friedrich, K., Ye, L. (2010). A Study on the Transfer Film in Sliding Contact between Polymeric Composites and Steel Disks Using Nanoindentation. The Seventh Asian-Australasian Conference on Composite Materials (ACCM7), Taiwan: Industrial Technology Research Institute.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2010). Assessment of debonding in sandwich CF/EP composite beams using A0 Lamb wave at low frequency. Composite Structures, 93(2), 483-491.
  • Peng, H., Ye, L., Meng, G., Mustapha, S., Li, F. (2010). Concise analysis of wave propagation using the spectral element method and identification of delamination in CF/EP composite beams. Smart Materials and Structures, 19(8), 1-11. [More Information]
  • Lu, Y., Ye, L., Wang, D., Wang, X., Su, Z. (2010). Conjunctive and compromised data fusion schemes for identification of multiple notches in an aluminium plate using lamb wave signals. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 57(9), 2005-2016.
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2010). Damage identification in thick steel beam based on guided ultrasonic waves. Journal of Intelligent Material Systems and Structures, 21(3), 225-232.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2010). Debonding Assessment in Sandwich CF/EP Composite Beams Using Surface Mounted PZT Transducers. 5th European Workshop on Structural Health Monitoring, Pennsylvania, USA: DEStech Publications Inc.
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Experimental measurement and numerical simulation of viscosity reduction effects in HMMPE containing a small amount of exfoliated organoclay-modified TLCP composite. Polymer, 51(2), 514-521. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Organoclay-modified thermotropic liquid crystalline polymers as viscosity reduction agents for high molecular mass polyethylene. Journal of Materials Science, 45(19), 5353-5363. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C. (2010). Organoclay/Thermotropic Liquid Crystalline Polymer Nanocomposites. III. Effects of Fully Exfoliated Organoclay on Morphology, Thermal, and Rheological Properties. Journal of Polymer Science Part B-Polymer Physics, 48(6), 712-720. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part II: shear-induced phase separation. Journal of Materials Science, 45(16), 4422-4430. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part IV: organoclay of comparable size to fully extended TLCP molecules. Journal of Materials Science, 45(12), 3336-3343. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/thermotropic liquid crystalline polymer nanocomposites. Part V: morphological and rheological studies. Journal of Materials Science, 45(11), 2874-2883. [More Information]
  • Tang, Y., Gao, P., Ye, L., Zhao, C., Lin, W. (2010). Organoclay/Thermotropic Liquid Crystalline Polymer Nanocomposites. Part VI: Effects of Intercalated Organoclay on Nanocomposite Morphology, Thermal and Rheological Properties. International Journal of Smart and Nano Materials, 1(3), 173-186. [More Information]
  • Chen, Z., Ye, L., Lu, M. (2010). Permeability Predictions for Woven Fabric Preforms. Journal of Composite Materials, 44(13), 1569-1586.
  • Lu, Y., Ye, L., Wang, D., Zhou,, L., Cheng, L. (2010). Piezo-activated guided wave propagation and interaction with damage in tubular structures. Smart Structures and Systems, 6(7), 835-849.
  • Lu, Y., Ye, L., Li, J., Wang, D. (2010). Piezo-activated Ultrasonic Waves for Damage Detection in Rebar-Reinforced Concrete Beams. 5th World Conference on Structural Control and Monitoring, Tokyo: N/A.
  • Wang, D., Ye, L., Su, Z., Lu, Y., Li, F., Meng, G. (2010). Probabilistic damage identification based on correlation analysis using guided wave signals in aluminum plates. Structural Health Monitoring: an international journal, 9(2), 133-144.
  • Cao, M., Ye, L., Zhou,, L., Su, Z., Bai, R. (2010). Sensitivity of fundamental mode shape and static deflection for damage identification in cantilever beams. Mechanical Systems and Signal Processing, 25(2), 630-643. [More Information]
  • Wang, D., Lu, Y., Li, F., Ye, L. (2010). Shannon Entropy and Kurtosis Analyses of Ultrasonic Wave Signals from Active Sensor Network for Damage Identification in Composite Structures. The Seventh Asian-Australasian Conference on Composite Materials (ACCM7), Taiwan: Industrial Technology Research Institute.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346. [More Information]
  • Tang, Y., Jim, C., Liu, Y., Ye, L., Qin, A., Lam, J., Zhao, C., Tang, B. (2010). Synthesis and Curing of Hyperbranched Poly(triazole)s with Click Polymerization for Improved Adhesion Strength. ACS Applied Materials and Interfaces, 2(2), 566-574. [More Information]

2009

  • Wang, D., Ye, L., Lu, Y. (2009). A Probabilistic Diagnostic Algorithm for Identification of Multiple Notches Using Digital Damage Fingerprints (DDFs). Journal of Intelligent Material Systems and Structures, 20, 1439-1450.
  • Lu, Y., Ye, L., Su, Z., Zhou, L., Cheng, L. (2009). Artificial Neural Network (ANN)-based Crack Identification in Aluminium Plates with Lamb Wave Signals. Journal of Intelligent Material Systems and Structures, 20, 39-49.
  • Deng, S., Qi, B., Hou,, M., Ye, L., Magniez, K. (2009). Assessment of interfacial bonding between polymer threads and epoxy resin by transverse fibre bundle (TFB) tests. Composites Part A: Applied Science and Manufacturing, 40(11), 1698-1707. [More Information]
  • Lu, Y., Ye, L., Wang, D., Zhong, Z., Herszberg, I. (2009). Damage Detection in a Large Composite Panel of Five Stiffeners Using Lamb Wave Signals. Materials Forum, 33, 136-142.
  • Su, Z., Wang, X., Ye, L. (2009). Data fusion of multiple signals from the Sensor Network. In Chang, Fu-Kuo; Fujino, Yozo; Boller, Christian (Eds.), Encyclopedia of Structural Health Monitoring: Volume 2, (pp. 697-708). United Kingdon: John Wiley & Sons.
  • Li, F., Meng, G., Ye, L., Lu, Y., Kageyama, K. (2009). Dispersion analysis of Lamb waves and damage detection for aluminum structures using ridge in the time-scale domain. Measurement Science and Technology, 20(9), 095704-1-095704-10.
  • Deng, S., Zhang, J., Ye, L. (2009). Effects of Chemical Treatment and Mixing Methods on Fracture Behaviour of Halloysite-Epoxy Nanocomposites. Seventeenth International Conference on Composite Materials (ICCM17), Edinburgh, UK: The Institute of Materials, Minerals and Mining, UK.
  • Chang, L., Friedrich, K., Ye, L., Toro, P. (2009). Evaluation and visualization of the percolating networks in multi-wall carbon nanotube/epoxy composites. Journal of Materials Science, 44, 4003-4012. [More Information]
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2009). Fatigue Crack Identification in Thick Steel Beam Using Guided Waves. 7th International Workshop on Structural Health Monitoring IWSHM 2009, United States: DEStech Publications Inc.
  • Lu, X., Lu, M., Zhou, L., Su, Z., Cheng, L., Ye, L., Meng, G. (2009). Guided wave propagation based damage detection in welded rectangular tubular structures. 2nd International Conference on Smart Materials and Nanotechnology in Engineering SMN 2009, United States: SPIE - International Society for Optical Engineering. [More Information]
  • Deng, S., Zhang, J., Ye, L. (2009). Halloysite-epoxy nanocomposites with improved particle dispersion through ball mill homogenisation and chemical treatments. Composites Science and Technology, 69(14), 2497-2505. [More Information]
  • Su, Z., Ye, L. (2009). Identification of Damage Using Lamb Waves: From Fundamentals to Applications. Germany: Springer.
  • Heng, D., Ogawa, K., Cutler, D., Chan, H., Raper, J., Ye, L., Yun, J. (2009). Investigating the Unique Dissolution Behaviour of Nanoparticles. 6th International Conference for Conveying and Handling of Particulate Solids (CHoPS+ICBMH), Barton, ACT Australia: Engineers Australia.
  • Lu, Y., Ye, L., Wang, D., Wang, X., Su, Z. (2009). Lamb Wave Signals for Damage Detection Using a Probability-Based Imaging Algorithm. 7th International Workshop on Structural Health Monitoring IWSHM 2009, United States: DEStech Publications Inc.
  • Wang, D., Ye, L., Lu, Y., Su, Z. (2009). Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffeners. Composites Science and Technology, 69(13), 2054-2063. [More Information]
  • Heng, D., Ogawa, K., Cutler, D., Chan, H., Raper, J., Ye, L., Yun, J. (2009). Pure drug nanoparticles in tablets: what are the dissolution limitations? Journal of Nanoparticle Research, , 1-12.
  • Lu, Y., Ye, L., Wang, D., Zhong, Z. (2009). Time-domain Analyses and Correlations of Lamb Wave Signals for Damage Detection in a Composite Panel of Multiple Stiffeners. Journal of Composite Materials, 43(26), 3211-3230.

2008

  • Ye, L., Lu, Y., Wang, D. (2008). Correlation-Based Damage Detection in a Composite Panel of Multiple Stiffeners Using Guided Wave Signals. International Conference on Intelligent Textiles ICIT2008, Korea: International Conference on Intelligent Textiles.
  • Sun, K., Meng, G., Li, F., Ye, L., Lu, Y. (2008). Damage detection in thick steel beam using lamb waves. ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), USA: American Society of Mechanical Engineers (ASME).
  • Wang, D., Ye, L., Lu, Y., Li, F. (2008). Diagnostics of damage presence using tomographically constructed probability distribution based on Lamb wave signals. The 4th European Workshop on Structural Health Monitoring 2008, Lancaster, Pennsylvania, USA: DEStech Publications Inc.
  • Ye, L., Rosso, P., Deng, S., Wu, J. (2008). Fracture of Epoxy Nanocomposites - Role of Particles. The Eighth International Conference on Fundamentals of Fracture (ICFF VIII), China: N/A.
  • Ye, L., Zhang, L., Bell, J., Yan, C. (2008). Frontiers in Materials Science and Technology. Switzerland: Trans Tech Publications.
  • Yang, C., Hodgson, P., Liu, Q., Ye, L. (2008). Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening. Journal of Materials Processing Technology, 201, 303-309. [More Information]
  • Lu, Y., Ye, L., Wang, D., Meng, G. (2008). Guided wave propagation and interaction with damage in tubular structures. Advanced Materials Research, 32, 289-292.
  • Lu, X., Li, F., Meng, G., Ye, L., Lu, Y. (2008). Lamb Wave Based Damage Identification in Structures with Complex Geometry. ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), USA: American Society of Mechanical Engineers (ASME).
  • Su, Z., Ye, L. (2008). Lamb wave-based quantitative identification of delamination in composite laminates. In Srinivasan Sridharan (Eds.), Delamination behaviour of composites, (pp. 169-216). Cambridge, UK: Woodhead Publishing Ltd.
  • Zhang, J., Deng, S., Ye, L., Wu, J. (2008). Mechanical Performance of Halloysite-Epoxy Nanocomposites. The 6th Asia-Australasian Conference on Composite Materials (ACCM-6), Kyoto, Japan: The Society of Materials Science, Japan.
  • Zhang, Z., Chen, H., Ye, L. (2008). Progressive failure analysis for advanced grid stiffened composite plates/shells. Composite Structures, 86, 45-54. [More Information]
  • Lu, Y., Ye, L., Su, Z., Yang, C. (2008). Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminium plates. NDT and E International, 41(1), 59-68.
  • Yang, J., Chen, Z., Yang, G., Fu, S., Ye, L. (2008). Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer. Polymer, 49, 3168-3175.
  • Kruckenberg, T., Ye, L., Paton, R. (2008). Static and vibration compaction and microstructure analysis on plain-woven textile fabrics. Composites Part A: Applied Science and Manufacturing, 39(3), 488-502. [More Information]
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2008). Synergistic effects of nanoparticles and traditional tribo-fillers on sliding wear of polymeric hybrid composites. In Friedrich K, Schlarb AK (Eds.), Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings, (pp. 35-61). Oxford, United Kingdom: Elsevier.
  • Large, M., Moran, J., Ye, L. (2008). The role of material properties in the strain testing using microstructured Polymer Optical Fibres (mPOF). 19th International Conference on Optical Fibre Sensors (OFS 19), USA: SPIE - International Society for Optical Engineering.
  • Deng, S., Zhang, J., Ye, L., Wu, J. (2008). Toughening epoxies with halloysite nanotubes. Polymer, 49(23), 5119-5127.
  • Li, F., Meng, G., Ye, L., Chen, P. (2008). Wavelet Transform-based Higher-order Statistics for Fault Diagnosis in Rolling Element Bearings. Journal of Vibration and Control, 14(11), 1691-1709.

2007

  • Su, Z., Wang, X., Zhiping, C., Ye, L. (2007). A hierarchical data fusion scheme for identifying multi-damage in composite structures with a built-in sensor network. Smart Materials and Structures, 16, 2067-2079.
  • Yang, C., Su, Z., Ye, L., Zhou, L., Hodgson, P. (2007). A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics. Key Engineering Materials, 334-335, 1141-1144.
  • Su, Z., Yang, C., Pan, N., Ye, L., Zhou, L. (2007). Assessment of delamination in composite beams using shear horizontal (SH) wave mode. Composites Science and Technology, 67(2), 244-251. [More Information]
  • Yan, L., Wang, K., Wu, J., Ye, L. (2007). Characterization of fluoroalkylsilane monolayer on polystyrene sphere arrays after plasma treatment. Surface Science, 601(5), 1394-1402.
  • Su, Z., Wang, X., Chen, Z., Ye, L. (2007). Damage Assessment of Multi-layered Composite Structure using an Embedded Active Sensor Network. Key Engineering Materials, 334-335, 461-464.
  • Mustapha, S., Ye, L., Wang, D., Lu, Y. (2007). Detection and assessment of debonding in sandwich CF/EP composite structures using Lamb waves. 14th International Conference on Composite Structures.
  • Rosso, P., Ye, L. (2007). Epoxy/silica nanocomposites: Nanoparticle-induced cure kinetics and microstructure. Macromolecular Rapid Communications, 28(1), 121-126. [More Information]
  • Deng, S., Ye, L., Friedrich, K. (2007). Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures. Journal of Materials Science, 42(8), 2766-2774. [More Information]
  • Ye, Y., Chen, H., Wu, J., Ye, L. (2007). High impact strength epoxy nanocomposites with natural nanotubes. Polymer, 48(21), 6426-6433.
  • Yan, L., Wang, K., Wu, J., Ye, L. (2007). Hydrophobicity of model surfaces with closely packed nano-and micro-spheres. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 296, 123-131. [More Information]
  • Friedrich, K., Hoffmann, J., Evstatiev, M., Ye, L., Mai, Y. (2007). Improvements of stiffness and strength of bio-resorbable bone nails by the MFC-concept. Key Engineering Materials, 334-335, 1181-1184.
  • Deng, S., Rosso, P., Ye, L., Friedrich, K. (2007). Interlaminar Fracture of CF/EP Composites Modified with Nano-Silica. Solid State Phenomena, 121-123(Part 2), 1403-1406.
  • Feng, S., Hao-ran, C., Ye, L. (2007). Nonlinear dynamic stability analysis for piezoelectric composite laminates with debonded interfaces. Sixteenth INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM-16,2007), Japan: Japan Society for Composite Materials.
  • Bai, R., Chen, B., Yan, C., Ye, L., Li, Z., Chen, H. (2007). Numerical investigation of post buckling strength and failure modes in advanced grid stiffened structure under thermal-mechanical loads. Key Engineering Materials, 334-335, 613-616.
  • Friedrich, K., Klein, P., Theiler, G., Ye, L., Mai, Y. (2007). PEEK- and PTFE-based composites for tribological applications in a range between liquid helium and room temperature. Key Engineering Materials, 334-335, 597-600.
  • Ye, L., HU, X., Hoffman, M. (2007). Professor Yiu-Wing Mai. Composites Science and Technology, 67(2), 149-150. [More Information]
  • Yang, C., Su, Z., Ye, L., Lu, Y., Bannister, M. (2007). Propagation Characteristics of Lamb waves in Stringer-Stiffened Panels. Key Engineering Materials, 334-335, 637-640.
  • Lu, Y., Ye, L., Su, Z., Huang, N. (2007). Quantitative evaluation of crack orientation in aluminium plates based on Lamb waves. Smart Materials and Structures, 16(5), 1907-1914.
  • Deng, S., Hou, M., Ye, L. (2007). Temperature-dependent elastic moduli of epoxies measured by DMA and their correlations to mechanical testing data. Polymer Testing, 26(6), 803-813.
  • Liu, Q., Yang, C., Ding, K., Barter, S., Ye, L. (2007). The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy. Fatigue and Fracture Of Engineering Materials and Structures, 30(11), 1110-1124.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2007). Tribological properties of epoxy nanocomposites III. Characteristics of transfer film. Wear, 262, 699-706.
  • Chang, L., Zhang, Z., Ye, L., Friedrich, K. (2007). Tribological properties of high temperature resistant polymer composites with fine particles. Tribology International, 40(7), 1170-1178.
  • Su, Z., Cheng, L., Ye, L. (2007). Vibration-based structural condition monitoring using concept of digital damage fingerprints (DDF). Inter-noise 2007, UK: Multi-Science Publishing Co Ltd.

2006

  • Su, Z., Wang, X., Chen, Z., Ye, L., Wang, D. (2006). A built-in active sensor network for health monitoring of composite structures. Smart Materials and Structures, 15, 1939-1949.
  • Li, F., Su, Z., Ye, L., Meng, G. (2006). A correlation filtering-based matching pursuit (CF-MP) for damage identification using Lamb waves. Smart Materials and Structures, 15(6), 1585-1594.
  • Chen, Z., Ye, L., Kruckenberg, T. (2006). A micromechanical compaction model for woven fabric preforms. Part I: Single layer. Composites Science and Technology, 66(16), 3254-3262. [More Information]
  • Chen, Z., Ye, L. (2006). A micromechanical compaction model for woven fabric preforms. Part II: Multilayer. Composites Science and Technology, 66(16), 3263-3272. [More Information]
  • Fu, S., Pan, Q., Huang, C., Yang, G., Liu, X., Ye, L., Mai, Y. (2006). A preliminary study on cryogenic mechanical properties of epoxy blend matrices and SiO2/epoxy nanocomposites. Key Engineering Materials, 312, 211-216.
  • Pan, N., Su, Z., Ye, L., Zhou, L., Lu, Y. (2006). A quantitative identification approach for delamination in laminated composite beams using digital damage fingerprints (DDFs). Composite Structures, 75(1-4), 559-570.
  • Rosso, P., Ye, L., Friedrich, K., Sprenger, S. (2006). A toughened epoxy resin by silica nanoparticle reinforcement. Journal of Applied Polymer Science, 100(3), 1849-1855. [More Information]
  • Meng, G., Ye, L., Dong, X., Wei, K. (2006). Closed loop finite element modeling of piezoelectric smart structures. Shock and Vibration, 13(1), 1-12.
  • Lu, Y., Ye, L., Su, Z. (2006). Crack identification in aluminium plates using Lamb wave signals of a PZT sensor network. Smart Materials and Structures, 15(3), 839-849.
  • Yan, C., Law, S., Ong, H., Ye, L. (2006). Effects of moisture and thermal shock on mechanical behaviour of silica optical fibres. OECC Taiwan 2006 - the Eleventh OptoElectronics and Communications Conference, Kaohsiung, Taiwan, R.O.C.: Technical Digest CD-ROM.
  • Chen, P., Shen, Z., Xiong, J., Yang, S., Fu, S., Ye, L. (2006). Failure mechanisms of laminated composites subjected to static indentation. Composite Structures, 75(1), 489-495. [More Information]
  • Deng, S., Ye, L. (2006). Fracture behaviours of nano-silica modified epoxies at elevated temperatures. Key Engineering Materials, 312, 243-248.
  • Yi, L., Mai, Y., Ye, L. (2006). Fracture properties and characteristics of sisal textile reinforced epoxy composites. Key Engineering Materials, 312, 167-172.
  • Lu, L., Lai, M., Lim, S., Chua, B., Yan, C., Ye, L. (2006). From waste to high strength alloy - recycling of magnesium chips. Zeitschrift fur Metallkunde, 97(2), 169-173.
  • Su, Z., Ye, L., Lu, Y. (2006). Guided Lamb waves for identification of damage in composite structures: A review. Journal of Sound and Vibration, 295(3-5), 753-780.
  • Ye, L., Su, Z., Yang, C., He, Z., Wang, X. (2006). Hierarchical development of training database for artificial neural network-based damage identification. Composite Structures, 76(3), 224-233. [More Information]
  • Yan, L., Wang, K., Wu, J., Ye, L. (2006). Hydrophobicity of model surfaces with loosely packed polystyrene spheres after plasma etching. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 110(23), 11241-11246.
  • Rosso, P., Riches, J., Ye, L. (2006). Interphase phenomena in novel CFRP's. ACUN-5 International Composites Conference "Developments in Composites: Advanced, Infrastructural, Natural, and Nano-Composites", Australia: University of NSW (UNSW).
  • Yu, X., Cartwright, B., McGuckin, D., Ye, L., Mai, Y. (2006). Intra-ply shear locking in finite element analyses of woven fabric forming processes. Composites Part A: Applied Science and Manufacturing, 37(5), 790-803. [More Information]
  • Lu, Y., Ye, L., Su, Z. (2006). Lamb Wave-Based Quantitative Crack Evaluation in Aluminium Plates. International Conference and Exhibition on Structural Integrity and Failure (SIF2006). Institute of Materials Engineering Australasia.
  • Friedrich, K., Schmitt, S., Stephan, J., Ye, L. (2006). Mechanical property profile of a new poly-paraphenylene-copolymer (PPP). ACUN-5 International Composites Conference "Developments in Composites: Advanced, Infrastructural, Natural, and Nano-Composites", Australia: University of NSW (UNSW).
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2006). Multilevel decision fusion in a distributed active sensor network for structural damage detection. Structural Health Monitoring: an international journal, 5(1), 45-58.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). Re-evaluation of fragmentation test based on the stress singularity of interface end. Composite Interfaces, 13(1), 67-88.
  • Ding, K., Ye, L. (2006). Simulation of multiple laser shock peening of a 35CD4 steel alloy. Journal of Materials Processing Technology, 178(1-3), 162-169. [More Information]
  • Yang, C., Ye, L., Su, Z., Bannister, M. (2006). Some aspects of numerical simulation for Lamb wave propagation in composite laminates. Composite Structures, 75(1-4), 267-275.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). Specimen design for IFSS measurement in fiber pullout test. Key Engineering Materials, 312, 149-154.
  • Yan, C., Yu, H., Ye, L., Canning, J., Ashton, B. (2006). Tensile Behavior of photonic crystal fibres. Asian Pacific Conference on Fracture and Strength (APCFS 06), China: Chinese Mechanical Engineering Society.
  • Ratinac, K., Gilbert, R., Ye, L., Jones, A., Ringer, S. (2006). The effects of processing and organoclay properties on the structure of poly(methyl methacrylate)-clay nanocomposites. Polymer, 47, 6337-6361.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2006). The reliability of fragmentation test. Key Engineering Materials, 312, 155-160.

2005

  • Su, Z., Ye, L. (2005). A fast damage locating approach using digital damage fingerprints extracted from Lamb wave signals. Smart Materials and Structures, 14(5), 1047-1054.
  • Zhang, X., Wang, C., Ye, L., Mai, Y. (2005). A study of the crack wake closure/opening behaviour of short fatigue cracks and its influence on crack growth. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 406, 195-204.
  • Su, Z., Ye, L., Ling, H., Zhou, L., Lau, K. (2005). Comparison of genetic algorithm and artificial neural network for damage detection of composite structures. 15th International Conference on Composite Materials (ICCM-15) 2005. No Publisher - CD-ROM only.
  • Yu, X., Ye, L., Mai, Y., Wright, S., McGuckin, D., Paton, R. (2005). Composite forming simulations: From fundamental research to industrial application. SAMPE 2005 Long Beach Conference, Long Beach, CA, United States: Soc. for the Advancement of Material and Process Engineering, Covina, CA 91724-3748, United States.
  • Huang, C., Fu, S., Zhang, Y., Lauke, B., Li, L., Ye, L. (2005). Cryogenic properties of SiO2/epoxy nanocomposites. Cryogenics, 45(6), 450-454. [More Information]
  • Ye, L., Chen, Z., Lu, M., Hou, M. (2005). De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites. Composites Part A: Applied Science and Manufacturing, 36(7), 915-922. [More Information]
  • Ye, L., Lu, M., Liu, H. (2005). Deconsolidation and Reconsolidation of Thermoplastic Composites During Processing. In K. Friedrich, S. Fakirov, Z. Zhang (Eds.), Polymer Composites - From Nano- to Macro-Scale, (pp. 233-254). NY, USA: Springer Science + Business Media.
  • Su, Z., Ye, L. (2005). Digital Damage Fingerprints (DDF) and its application in quantitative damage identification. Composite Structures, 67(2), 197-204. [More Information]
  • Yan, L., Mai, Y., Ye, L. (2005). Effects of fibre surface treatment on fracture-mechanical properties of sisal-fibre composites. Composite Interfaces, 12(1-2), 141-163.
  • Su, Z., Ling, H., Zhou, L., Lau, K., Ye, L. (2005). Efficiency of genetic algorithm and artificial network for evaluating delamination in composite structures using fibre Bragg grating sensors. Smart Materials and Structures, 14, 1541-1553.
  • Chen, Q., Fan, H., Ye, L., Ringer, S., Sun, J., Shen, J., McCartney, D. (2005). Enhanced glass forming ability of Fe-Co-Zr-Mo-W-B alloys with Ni addition. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 402(1-2), 188-192.
  • Yu, X., Ye, L., Mai, Y., Wright, S., McGuckin, D., Paton, R. (2005). Finite element simulations of double-diaphragm forming process: comparison with experimental trials. European Finite Element Revue (Revue Europeenne de Mecanique Numerique, 14, 633-651.
  • Kim, K., Ye, L., Yan, C. (2005). Fracture behavior of polyetherimide (PEI) and interlaminar fracture of CF/PEI laminates at elevated temperatures. Polymer Composites, 26(1), 20-28. [More Information]
  • Ye, L., Lu, Y., Su, Z., Meng, G. (2005). Functionalized composite structures for new generation airframes: a review. Composites Science and Technology, 65(9), 1436-1446. [More Information]
  • Shen, J., Zou, J., Ye, L., Lu, Z., Xing, D., Yan, M., Sun, J. (2005). Glass-forming ability and thermal stability of a new bulk metallic glass in the quaternary Zr-Cu-Ni-Al system. Journal of Non-Crystalline Solids, 351(30-32), 2519-2523. [More Information]
  • Kim, K., Ye, L. (2005). Influence of matrix and interface on transverse mechanical properties of CF-PEI thermoplastic composites at elevated temperatures. Journal of Reinforced Plastics and Composites, 24(4), 429-445.
  • Deng, S., Ye, L., Riches, J., Rosso, P. (2005). Interlaminar Fracture of CF/EP Composites Modified with Nano-Silica. China International Conference on Nanoscience and Technology (ChinaNANO2005), : Trans Tech Publications.
  • Su, Z., Ye, L. (2005). Lamb Wave Propagation-based Damage Identification for Quasi-isotropic CF/EP Composite Laminates Using Artificial Neural Algorithm: Part I - Methodology and Database Development. Journal of Intelligent Material Systems and Structures, 16(2), 97-111. [More Information]
  • Su, Z., Ye, L. (2005). Lamb Wave Propagation-based Damage Identification for Quasi-isotropic CF/EP Composite Laminates Using Artificial Neural Algorithm: Part II - Implementation and Validation. Journal of Intelligent Material Systems and Structures, 16(2), 113-125. [More Information]
  • Yuan, Q., Bateman, S., Ye, L. (2005). Mechanical and crash behaviour of sheet moulding compound materials. Advanced Composites Letters, 14(1), 7-14.
  • Yan, C., Wang, X., Ye, L., Digweed, K., Canning, J. (2005). Mechanical Failure of Holey Optical Fibres in Tension. 2005 IEEE LEOS Annual Meeting Conference, Sydney: (IEEE) Institute of Electrical and Electronics Engineers.
  • Yang, C., Ye, L., Su, Z. (2005). Mechanistic models for PZT actuators/sensors of wave propogation in plate-like structures. Australian Structural Engineering Conference (ASEC-2005), Sydney, Australia: Institute of Engineers Australia.
  • Kim, K., Curiskis, J., Ye, L., Fu, S. (2005). Mode-I interlaminar fracture behaviour of weft-knitted fabric reinforced composites. Composites Part A: Applied Science and Manufacturing, 36(7), 954-964. [More Information]
  • Su, Z., Ye, L. (2005). Modelling Structural Damage Using Elastic Wave-Basd Techniques. In C Soutis, Shefield University & P.W.R. Beaumont, Cambridge University, UK (Eds.), Mutli-scale modelling of composite material systems: The art of predictive damage modelling, (pp. 430-468). Cambridge, England: Woodhead Publishing Ltd.
  • Yang, C., Ye, L., Su, Z. (2005). Numerical Simulation for Lamb Wave-based Structural Health Monitoring (SHM) Technique. The Australian Structural Engineering Conference 2005, Newcastle, NSW: Cannot be located.
  • Su, Z., Ye, L. (2005). Quantitative damage prediction for composite laminates based on wave propagation and artificial neural networks. Structural Health Monitoring: an international journal, 4(1), 57-66.
  • Yu, X., Ye, L., Mai, Y. (2005). Spurious wrinkles in forming simulations of woven fabric. International Journal of Forming Processes, 8, 141-155.
  • Shen, J., Wang, G., Sun, J., Stachurski, Z., Yan, C., Ye, L., Zhou, B. (2005). Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region. Intermetallics, 13(1), 79-85.
  • Yan, C., Ye, L., Yan, L., Mai, Y., Lu, L., Lai, M. (2005). Synthesis and Mechanical Properties of Nanostructured Mg-Al-Nd Alloys. Advanced Materials Research, 9, 93-100.
  • Yan, C., Ye, L., Yan, L., Mai, Y., Lu, L., Lai, M. (2005). Synthesis and Mechanical Properties of Nanostructured Mg-Al-Nd Alloys. In Zhang T Y; Kim J K (Eds.), Macro-, Meso-, Micro- and Nano-Mechanics of Materials, (pp. 93-100). Zurich: Trans Tech Publications.
  • Dong, X., Meng, G., Li, H., Ye, L. (2005). Vibration analysis of a stepped laminated composite Timoshenko beam. Mechanics Research Communications, 32(5), 572-581.

2004

  • Zhang, X., Shi, Y., Ye, L., Mai, Y. (2004). A Tin-Based Composite Solder Reinforced By Nano-Sized Particulates And Its Soldering Ability. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Su, Z., Ye, L. (2004). An Intelligent Signal Processing And Pattern Recognition Technique For Defect Identification Using An Active Sensor Network. Smart Materials and Structures, 13(4), 957-969.
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2004). Bayesian Inference For Structural Damage Identification With A Distributed Sensor Network. 2nd Australasian Workshop on Structural Health Monitoring, Clayton, Victoria: Australasian Workshop on Structural Health Monitoring.
  • Shen, Z., Yang, S., Fu, S., Ye, L. (2004). Characterization Of Damage Resistance And Damage Tolerance Of Composite Materials. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Zhang, X., Galea, S., Ye, L., Mai, Y. (2004). Characterization Of The Effects Of Applied Electric Fields On Fracture Toughness And Cyclic Electric Field Induced Fatigue Crack Growth For Piezoceramic Pic 151. Smart Materials and Structures, 13(1), N9-N16.
  • Chen, Z., Ye, L., Kruckenberg, T. (2004). Compaction Of Single Layer Plain Weave Fabric Preform. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Nguyen, M., Wang, X., Su, Z., Ye, L. (2004). Damage Identification For Composite Structures With A Bayesian Network. International Conference on Intelligent Sensors, Sensor Networks and Information Processing. (IEEE) Institute of Electrical and Electronics Engineers.
  • Yan, C., Ye, L., Mai, Y. (2004). Effect Of Constraint On Tensile Behavior Of An Az91 Magnesium Alloy. Materials Letters, 58(25), 3219-3221.
  • Yan, C., Ye, L., Mai, Y. (2004). Effect Of Constraint On The Tensile Behavior Of An AZ91 Magnesium Alloy. International Conference on Structural Integrity and Fracture - SIF 2004, Brisbane, Australia: Australian Fracture Group.
  • Chen, Z., Ye, L., Liu, H. (2004). Effective Permeabilities Of Multilayer Fabric Preforms In Liquid Composite Moulding. Composite Structures, 66, 351-357. [More Information]
  • Kim, K., Ye, L. (2004). Effects Of Thickness And Environmental Temperature On Fracture Behaviour Of Polyetherimide (Pei). Journal of Materials Science, 39(4), 1267-1276.
  • Zhang, X., Yuan, Q., Ngatimin, W., Whitbourn, J., Ye, L. (2004). Environment Effect Of Natural Sisal Fibre Reinforced Epoxy Composites Manufactured By Resin Transfer Moulding. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Yu, X., Ye, L., McGuckin, D. (2004). Evaluation Of Intra-Ply Shearing Stiffness For A Plain Weave Fabric Prepreg. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Su, Z., Ye, L. (2004). Fundamental Lamb Mode-Based Delamination Detection For Cf/Ep Composite Laminates Using Distributed Piezoelectrics. Structural Health Monitoring: an international journal, 3(1), 43-68.
  • Hu, Y., Zhang, H., Yan, C., Ye, L., Ding, B., Hu, Z. (2004). Hydrogenation Mechanisms Of Mg During Reaction Ball Milling. Journal of Materials Science, 39(4), 1455-1457.
  • Wang, X., Foliente, G., Su, Z., Ye, L. (2004). Information Fusion In Distributed Sensor Network For Structural Damage Detection. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Ji, X., Dai, Y., Ye, L., Mai, Y. (2004). Interface End Theory and Fragmentation Test. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Kim, K., Ye, L., Phao, K. (2004). Interlaminar Fracture Toughness Of Cf/Pei And Gf/Pei Composites At Elevated Temperatures. Applied Composite Materials, 11(3), 173-190.
  • Kim, K., Ye, L. (2004). Interlaminar Fracture Toughness Of Cf/Pei Composites At Elevated Temperatures: Roles Of Matrix Toughness And Fibre/Matrix Adhesion. Composites Part A: Applied Science and Manufacturing, 35(4), 477-487. [More Information]
  • Lu, Y., Ye, L., Su, Z. (2004). Lamb Wave-Based Damage Detection For Aluminium Alloy Structure Using Active Sensor Network. 2nd Australasian Workshop on Structural Health Monitoring, Clayton, Victoria: Australasian Workshop on Structural Health Monitoring.
  • Su, Z., Ye, L. (2004). Lamb Wave-Based Quantitative Identification Of Delamination In Cf/Ep Composite Structures Using Artificial Neural Algorithm. Composite Structures, 66(38443), 627-637. [More Information]
  • Choupani, N., Ye, L., Mai, Y. (2004). Mixed-Mode Fracture Of A CF/PEI Composite Material. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Yan, C., Ye, L., Raviprasad, K., Lai, M., Lu, L. (2004). Origin Of Ductility Of Nanostructured Mg Alloys. The 13th International Conference on Processing and Fabrication of Advanced Materials (PFAM XIII), Singapore: Stallion Press.
  • Huang, N., Ye, L., Su, Z. (2004). Parameterised Modelling Technique And Its Application To Artificial Neural Network-Based Structural Health Monitoring. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Li, Y., Mai, Y., Ye, L. (2004). Permeability Of Sisal Textile Reinforced Composites By Resin Transfer Molding. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Hu, Y., Yan, C., Zhang, H., Ye, L., Hu, Z. (2004). Preparation And Hydrogenation Characteristics Of Mg-30 Wt.% Ti37.5V25Cr37.5 Composite. Journal of Alloys and Compounds, 375(1-2), 265-269. [More Information]
  • Hu, Y., Zhang, H., Yan, C., Ye, L., Ding, B., Hu, Z. (2004). Preparation And Hydrogenation Of Body-Centered-Cubic Ticr2 Alloy. Materials Letters, 58(5), 783-786.
  • Hu, Y., Yan, C., Zhang, H., Ye, L., Hu, Z. (2004). Preparation Of Mg-Based Hydrogen Storage Nanocomposite By Reaction Ball Milling. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Ye, L., Mai, Y., Su, Z. (2004). Proceedings Edited: The 4Th Asian-Australasian Conference On Composite Materials (ACCM 4). Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Choi, Y., Su, Z., Chen, Z., Ye, L. (2004). Quantitative Nondestructive Evaluation In Composites Beam Using Piezoelectrics. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Su, Z., Ye, L. (2004). Selective Generation Of Lamb Wave Modes And Their Propagation Characteristics In Defective Composite Laminates. Institution of Mechanical Engineers. Proceedings. Part L: Journal of Materials: Design and Applications, 218(2), 95-110.
  • Dai, Y., Ji, X., Ye, L., Mai, Y. (2004). Stress Singularity Analysis Of Interface End And Speciment Design For Fiber Pullout Test. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Smith, C., Johnstone, B., Lu, M., Ye, L., Mai, Y. (2004). Study On Re-Pull Force In Pultrusion Processes - I. Experimental Observations. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Lu, M., Ye, L., Mai, Y., Smith, C., Johnstone, B. (2004). Study On Re-Pull Force In Pultrusion Processes - II. Theoretical Analysis. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Law, S., Yan, C., Ye, L. (2004). Tensile Behaviour of Polymer Coated Optical Fibres. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.
  • Kruckenberg, T., Ye, L., Paton, R. (2004). The Use Of An Ultrasonic Welder To Consolidate Fibre Performs. International SAMPE Technical Conference (SAMPE 2004), CD-ROM.
  • Lu, M., Ye, L., Mai, Y. (2004). Thermal De-Consolidation Of Thermoplastic Matrix Composites - Ii. 'Migration' Of Voids And 'Re-Consolidation'. Composites Science and Technology, 64(2), 191-202.
  • Hou, M., Ye, L. (2004). Understanding The Thermoforming Issues Of Carbon Fibre Reinforced Polyphenylene Sulphide (Pps) Composite. Composites Technologies for 2020 Fourth Asian-Australasian Conference on Composite Materials (ACCM-4), Chippenham, Wilts, England: Woodhead Publishing Ltd.

2003

  • Xiongzhu, B., Ye, L., Su, Z., Wang, C. (2003). Active control of a flexible smart beam using a system identification technique based on ARMAX. Smart Materials and Structures, 12, 845-850.
  • Yan, C., Yan, L., Ye, L., Lu, L., Lai, M., Mai, Y. (2003). Fabrication and Microstructure of Mechanically Alloyed Mg-Al-Nd Alloys. Materials Science Forum, 437-438, 113-116.
  • Ding, K., Ye, L. (2003). FEM SIMULATION OF TWO SIDED LASER SHOCK PEENING OF THIN SECTIONS OF Ti-6AI-4V ALLOY. Surface Engineering, 19(2), 127-133.
  • Lu, D., Mai, Y., Li, R., Ye, L. (2003). Impact Strength and Crystallization Behavior of Nano-SiOx/Poly (phenylene sulfide) (PPS) Composites with Heat-treated PPS. Macromolecular Materials and Engineering, 288(9), 693-698.
  • Ji, X., Dai, Y., Zheng, B., Ye, L., Mai, Y. (2003). Interface end theory and re-evaluation in interfacial strength test methods. Composite Interfaces, 10(6), 567-580.
  • Yang, M., Wang, K., Ye, L., Mai, Y., Wu, J. (2003). Low density polyethylene-polypropylene blends. Part 1-Ductility and tensile properties. Plastics Rubber And Composites, 32(1), 21-26.
  • Yang, M., Wang, K., Ye, L., Mai, Y., Wu, J. (2003). Low density polyethylene-polypropylene blends. Part 2- Strengthening and toughening with copolymer. Plastics Rubber And Composites, 32(1), 27-32.
  • Waalib-Singh, N., Ye, L. (2003). Mechanical analysis of polymer optical fibres. World Congress on Medical Physics and Biomedical Engineering, WEB: Iupesm/Ifmbe/Iomp.
  • Balasuriya, P., Ye, L., Mai, Y. (2003). Morphology and mechanical properties of reconstituted wood board waste-polyethylene composites. Composite Interfaces, 10(2-3), 319-341.
  • Su, Z., Ye, L., Bu, X., Wang, X., Mai, Y. (2003). Quantitative assessment of damage in a structural beam based on wave propagation by impact excitation. Structural Health Monitoring: an international journal, 2(1), 27-40.
  • Yan, L., Wang, K., Ye, L. (2003). Super hydrophobic property of PVDF/CaCO(3) nanocomposite coatings. Journal of Materials Science, 22(23), 1713-1717.
  • Ding, K., Ye, L. (2003). Three- dimensional dynamic finite element analysis of multiple laser shock peening processes. Surface Engineering, 19(5), 351-358.

2002

  • Ye, L., Lu, M. (2002). "Migration" of voids in thermal de-consolidation of thermoplastic matrix composites. 17th Annual Technical Conference, West Lafayette: CRC Press.
  • Su, Z., Ye, L., Bu, X. (2002). A damage identificatin technique for CF/EP composite laminates using distributed piezoelectric transducers. Composite Structures, 57(1-4), 465-471.
  • Su, Z., Ye, L., Bu, X., Mai, Y., Wang, X. (2002). A damage identification approach based on stress wave propagation. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Bechtold, G., Ye, L., Riches, J. (2002). A novel approach to determine permeabilities for flow processes in composite manufacturing. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Ye, L., Lu, M. (2002). A void growth model for thermoplastic matrix composites during reheating processes. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Dai, S., Ye, L. (2002). Characteristics of CF/PEI tape winding process with on-line consolidation. Composites Part A: Applied Science and Manufacturing, 33(9), 1227-1238.
  • Zhang, X., Ye, L., Mai, Y., Wang, C. (2002). Characterization of the opening/closure behaviour of short fatigue cracks under cyclic loading and its influence on crack growth. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Zhang, X., Wang, C., Chen, W., Ye, L., Mai, Y. (2002). Characterization of the propagation behaviour of short fatigue cracks in nickel-based single crystal superalloy SC16. The 7th Liege Conference, Julich, Germany: Forschungszentrum Jülich.
  • Kim, K., Ye, L., Wu, J. (2002). Effect of environmental temperature on interlaminar fracture toughness of carbon fibre/polyetherimide composites. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Liang, W., Ye, L., Zhou,, L., Keren, D. (2002). Effect of moisture on interlaminar fracture behaviour of carbon fibre/epoxy composites with different fibre-matrix adhesion. Third Asian-Australasian Conference on Composite Materials 2002 (ACCM-3), Auckland, New Zealand: Department of Mechanical Engineering, University of Auckland.
  • Chen, Z., Yu, S., Lu, M., Ye, L. (2002). Effective properties of layered magneto-electro-elastic composites. Composite Structures, 57(1-4), 177-182.
  • Yan, C., Mai, Y., Ye, L. (2002). Elastic-plastic-creep analysis of PBGA electronic package solder joints. The Fifth International IEEE Symposium on High Density Packaging and Component Failure Analysis in Electronics manufacturing (HDP2002), Beijing, China: (IEEE) Institute of Electrical and Electronics Engineers.
  • Su, Z., Ye, L., Bu, X. (2002). Evaluation of delamination in laminated composites based on Lamb wave modes: FEM simulation and experimental verification. First European Workshop on Structural Health Monitoring, Pennsylvania, USA: DEStech Publications Inc.
  • Bechtold, G., Ye, L., Maier, J., Pletl, F., Riches, J. (2002). Evaluation of experimental method to determine micro geometrical transverse flow permeabilities of fibre bundles. ACUN-4, Sydney: University of New South Wales.
  • Chen, Z., Yu, S., Feng, X., Lu, M., Ye, L. (2002). Evaluation of thermo-elastic properties of three-dimensional orthogonal woven composites. Composites Part B: Engineering, 33(3), 241-251.
  • Yan, C., Ye, L., Mai, Y., Jiang, F., Kang, W., Zhao, K., Sun, J. (2002). Experimental investigation on fatigue crack growth normal to a bimaterial interface. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Ding, K., Ye, L., Liu,, Q. (2002). Finite element simulation of laser shock peening on an aluminum alloy. the Third Australasian Congress on Applied Mechanics, Singapore: World Scientific Publishing.
  • Ageorges, C., Ye, L. (2002). Fusion Bonding of Polymer Composites: From Basic Mechanisms to Process Optimisation. United States: Springer.
  • Dai, S., Ye, L. (2002). GF/PP tape winding with on-line consolidation. Journal of Reinforced Plastics and Composites, 21(1), 71-90.
  • Su, Z., Ye, L., Bu, X. (2002). Identification of delamination in worven fabric composite laminates using surface-bonded piezoelectrics. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Zhang, X., Wang, C., Ye, L., Mai, Y. (2002). In situ investigation of small fatigue crack growth in poly-crystal and single-crystal aluminium alloys. Fatigue and Fracture Of Engineering Materials and Structures, 25(2), 141-150.
  • Bechtold, G., Ye, L. (2002). Integrity of pultruded thermoplastic composites. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Montross, C., Wei, T., Ye, L., Clark, G., Mai, Y. (2002). Laser shock processing and its effects on microstructure and properties of metal alloys: a review. International Journal Of Fatigue, 24(10), 1021-1036.
  • Balasuriya, P., Ye, L., Mai, Y., Wu, J. (2002). Mechanical properties of wood flake-polyethylene composites. II. Interface modification. Journal of Applied Polymer Science, 83(12), 2505-2521. [More Information]
  • Yan, C., Xiao, K., Ye, L., Mai, Y. (2002). Numerical and experimental studies on the fracture behavior of rubber-toughened epoxy in bulk specimen and laminated composites. Journal of Materials Science, 37(5), 921-927.
  • Zhang, X., Li, J., Wang, C., Ye, L., Mai, Y. (2002). Prediction of short fatigue crack propagation behaviour by characterization of both plasticity and roughness induced crack closures. International Journal Of Fatigue, 24(5), 529-536.
  • Zhang, X., Ye, L., Mai, Y., Dorn, L. (2002). Study on correlation of the fracture toughness and microshear toughness for pressure vessel steels and structural steels. International Conference on Structural Integrity and Fracture, SIF 2002, Lisse, The Netherlands: A A Balkema.
  • Ye, L., Lu, M., Mai, Y. (2002). Thermal de-consolidation of thermoplastic matrix composites - I. Growth of voids. Composites Science and Technology, 62(16), 2121-2130.

2001

  • Lu, M., Ye, L., Chen, Z., Zhu, D. (2001). A homogenisation scheme and its application to evaluation of elastic properties of three-dimensional braided composites. Composites Part B: Engineering, 32, 67-86.
  • Ageorges, C., Ye, L., Hou,, M. (2001). Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review. Composites Part A: Applied Science and Manufacturing, 32, 839-857.
  • Afaghi-Khatibi, A., Ye, L., Mai, Y. (2001). An experimental study of the influence of fibre-matrix interface on fatigue tensile strength of notched composite laminates. Composites Part B: Engineering, 32, 371-377.
  • Lu, M., Mai, Y., Ye, L. (2001). Crack-tip field for fast fracture of an elastic-plastic-viscoplastic material incorporated with quasi-brittle damage. Part 1. Large damage regime. International Journal of Solids and Structures, 38, 9383-9402.
  • Lu, M., Mai, Y., Ye, L. (2001). Crack-tip field for fast fracture of an elastic-plastic-viscoplastic material incorporated with quasi-brittle damage. Part 2. Small damage regime. International Journal of Solids and Structures, 38, 9403-9420.
  • Yan, C., Mai, Y., Ye, L. (2001). Effect of bond thickness on fracture behaviour in adhesive joints. Journal of Adhesion, 75, 27-44.
  • Yan, C., Mai, Y., Yuan, Q., Ye, L., Sun, J. (2001). Effects of substrate materials on fracture toughness measurement in adhesive joints. International Journal of Mechanical Sciences, 43, 2091-2102.
  • Yuan, Q., Ye, L., Mai, Y. (2001). Energy absorption of sandwiched composite tubes. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Ye, L., Ageorges, C., Zhou,, L. (2001). Fusion bonding of thermoplastic composites with dissimilar materials. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Zhang, X., Ye, L., Mai, Y., Wang, C., Chen, W. (2001). Investigation of short fatigue cracks in nickel-based single crystal superalloy SC16 by in-situ SEM fatigue testing. Scripta Materialia, 44, 2443-2448.
  • Zhang, X., Ye, L., Mai, Y., Wang, C., Chen, W. (2001). Investigation of the growth behavior of microstructurally short fatigue cracks in nickel-based single crystal superalloy SC16. 10th International Conference on Fracture, Australia: UNSW Australian Defence Force Academy.
  • Ye, L., Mai, Y., Yuan, Q., Hou,, M. (2001). Manufacturing and joining of advanced thermoplastic composites. Thirteenth International Conference on Composite Materials (ICCM-13). Ads & Adea.
  • Balasuriya, P., Ye, L., Mai, Y. (2001). Mechanical properties of wood flake-polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour. Composites Part A: Applied Science and Manufacturing, 32, 619-629.
  • Bechtold, G., Ye, L., Riches, J. (2001). Model for the comparison of convective and contact preheating in a thermoplastic pultrusion process. 13th International Conference on Composite Materials. Ads & Adea.
  • Lu, M., Mai, Y., Ye, L. (2001). On fast fracture in an elastic-(plastic)-viscoplastic solid 1. Stress and velocity fields with loading and unloading processes. International Journal of Fracture, 111, 343-359.
  • Yuan, Q., Ye, L., Mai, Y., Hou,, M. (2001). Resistance welding of carbon fiber reinforced polyetherimide composite. Journal of Thermoplastic Composite Materials, 14, 2-19.
  • Ageorges, C., Ye, L. (2001). Resistance welding of metal/thermoplastic composite joints. Journal of Thermoplastic Composite Materials, 14, 449-475.
  • Ageorges, C., Ye, L. (2001). Resistance welding of thermosetting composite/thermoplastic composite joints. Composites Part A: Applied Science and Manufacturing, 32, 1603-1612.
  • Ageorges, C., Ye, L. (2001). Simulation of impulse resistance welding for thermoplastic matrix composites. Applied Composite Materials, 8, 133-147.
  • Li, W., Zhang, X., Mai, Y., Ye, L. (2001). Study on the effects of notch tip and crack tip plasticity on small fatigue crack growth. 10th International Conference on Fracture, Australia: UNSW Australian Defence Force Academy.

For support on your academic profile contact .