You are here: University of Sydney / Engineering & IT / About us / Our people / Associate Professor Qing Li 

Associate Professor Qing Li

School of Aerospace, Mechanical and Mechatronic Engineering

J04 - Rose Street Building
The University of Sydney

Telephone +61 2 9351 8607
Fax +61 2 9351 3760

Website School of Aerospace, Mechanical and Mechatronic Engineering

Teaching and supervision

AMME4981 - Applied Biomedical Engineering
AMME5020 - Capstone Project A
AMME5021 - Capstone Project B
AMME5218 - Research Dissertation
AMME5222 - Dissertation A
AMME5223 - Dissertation B
AMME5981 - Computational Biomedical Engineering
MECH3361 - Mechanics of Solids 2
MECH5361 - Foundations of Mechanics of Solids 2
MECH5900 - Thesis

Back to Top

Selected grants

2013

  • Biotransport Design for Engineering Microenvironment in Scaffolds; Li Q; Australian Research Council (ARC)/Discovery Projects (DP).

2012

  • Computational Design for Engineering Micro/Nanotopography; Li Q; Australian Research Council (ARC)/Future Fellowships (FT).

2011

  • Scaffold Design and Fabrication for Tissue Engineering; Li Q, Sun W; DVC Research/International Visiting Research Fellowship (IVRF).
  • Topology Optimisation? An Engineering Approach to Design of Metamaterials; Li Q, Zhou S; Australian Research Council (ARC)/Discovery Projects (DP).

2010

  • Topology Optimisation of Periodic Structures for Stent Design; Li Q; Australian Research Council (ARC)/Discovery Projects (DP).

2009

  • Enhancing dental education through computational modelling; Swain M, Li Q; Australia Malaysia Institute/Research Support.
  • CFD Driven Topological Design for Coronary Stents; Li Q; DVC Research/Bridging Support Grant.
  • Design Optimisation and Fabrication of Ceramic Prosthetic Devices; Li Q, Swain M, Reinhard P; Australian Research Council/Linkage Projects (LP).
  • A Multi-Resolution X-ray Microtomography Facility (NanoCT & MicroCT) for Non-Destructive 3D Characterisation; Jones A, Zhou H, Cairney J, Einav I, Swain M, Murphy C, Seibel M, Ringer S, Li Q, Darendeliler M, Wang X, Zhang Y, Hand S, Archer M, Ramzan I, Young P, Traini D, Richardson D, Masters A; Australian Research Council (ARC)/Linkage Infrastructure, Equipment and Facilities (LIEF).

2008

  • Computer simulation techniques to reduce the incidence of femoral fracture after hip replacement surgery; Appleyard R, Jim C, Ruys A, Li Q, Swain M; Australian Research Council (ARC)/Linkage Projects (LP).

2007

  • Cochlear implants: Identifying current paths through computational modelling of MRI data; Warfield S, Carter D, Patrick J, Carter P, Ruys A, Li Q, Li W, Carter P, Warfield S; Australian Research Council (ARC)/Linkage.
  • Computational Scaffold Optimisation for Tissue Engineering; Li Q, Appleyard R, Li W; Australian Research Council (ARC)/Discovery.
  • Modelling of Scaffold Degradation in Tissue Engineering; Li Q; University of Sydney/Newly Appointed Staff.

2005

  • Designs of periodic microstructure materials with prescribed multiphysical properties; Li Q; Australian Research Council (ARC)/Discovery: Project.
Back to Top

Selected publications

Download citations: PDF RTF Endnote

Book Chapters

  • Chen, Y., Cadman, J., Li, Q. (2010). Effect of Scaffold Architecture on Tissue Regeneration. In Lim, C T & Goh, J C H (Eds.), 6th World Congress of Biomechanics (WCB 2010) August 1 - 6, 2010 Singapore: In Conjunction with 14th International Conference on Biomedical Engineering (ICBME) and 5th Asia Pacific Conference on Biomechanics (APBiomech), (pp. 815-818). Berlin: Springer.

Journals

  • Song, X., Sun, G., Li, G., Gao, W., Li, Q. (2013). Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models. Structural and Multidisciplinary Optimization, 47(2), 221-231.
  • Liu, Q., Lin, Y., Zong, Z., Sun, G., Li, Q. (2013). Lightweight design of carbon twill weave fabric composite body structure for electric vehicle. Composite Structures, 97, 231-238.
  • Gu, X., Sun, G., Li, G., Huang, X., Li, Y., Li, Q. (2013). Multiobjective optimization design for vehicle occupant restraint system under frontal impact. Structural and Multidisciplinary Optimization, 47(3), 465-477.
  • Cadman, J., Zhou, S., Chen, Y., Li, Q. (2013). On design of multi-functional microstructural materials. Journal of Materials Science, 48, 51-66.
  • Ahmad, R., Abu-Hassan, M., Li, Q., Swain, M. (2013). Three dimensional quantification of mandibular bone remodeling using standard tessellation language registration based superimposition. Clinical Oral Implants Research.
  • Sarrafpour, B., Swain, M., Li, Q., Zoellner, H. (2013). Tooth eruption results from bone remodelling driven by bite forces sensed by soft tissue dental follicles: A finite element analysis. PLoS One, 8(3), e58803.
  • Field, C., Li, Q., Li, W., Thompson, M., Swain, M. (2012). A comparative mechanical and bone remodelling study of all-ceramic posterior inlay and onlay fixed partial dentures. Journal of Dentistry, 40(1), 48-56.
  • Cadman, J., Zhou, S., Chen, Y., Li, Q. (2012). Cuttlebone: Characterisation, Application and Development of Biomimetic Materials. Journal of Bionic Engineering, 9(3), 367-376.
  • Zhou, S., Cadman, J., Chen, Y., Li, W., Xie, Y., Huang, X., Appleyard, R., Sun, G., Li, Q. (2012). Design and fabrication of biphasic cellular materials with transport properties - A modified bidirectional evolutionary structural optimization procedure and MATLAB program. International Journal of Heat and Mass Transfer, 55(25–26), 8149-8162.
  • Mostofi Zadeh Farahani, R., Sarrafpour, B., Simonian, M., Li, Q., Hunter, N. (2012). Directed glia-assisted angiogenesis in a mature neurosensory structure: Pericytes mediate an adaptive response in human dental pulp that maintains blood-barrier function. The Journal of Comparative Neurology, 520(17), 3803-3826.
  • Huang, X., Xie, Y., Jia, B., Li, Q., Zhou, S. (2012). Evolutionary topology optimization of periodic composites for extremal magnetic permeability and electrical permittivity. Structural and Multidisciplinary Optimization, 46(3), 385-398.
  • Sarrafpour, B., Rungsiyakull, C., Swain, M., Li, Q., Zoellner, H. (2012). Finite element analysis suggests functional bone strain accounts for continuous post-eruptive emergence of teeth. Archives of Oral Biology, 57(8), 1070-1078.
  • Xie, K., Yang, L., Chen, K., Li, Q. (2012). In vitro study of the effect of cyclic strains on the dermal fibroblast (GM3384) morphology-Mapping of cell responses to strain field. Medical Engineering and Physics, 34(7), 826-831.
  • Zhang, Y., Sun, G., Li, G., Luo, Z., Li, Q. (2012). Optimization of Foam-Filled Bitubal Structures for Crashworthiness Criteria. Materials and Design, 38(June 2012), 99-109.
  • Zhang, Z., Zhou, S., Li, Q., Li, W., Swain, M. (2012). Sensitivity analysis of bi-layered ceramic dental restorations. Dental Materials, 28(2), e6-e14.
  • Sun, G., Li, G., Li, Q. (2012). Variable fidelity design based surrogate and artificial bee colony algorithm for sheet metal forming process. Finite Elements in Analysis and Design, 59(October 2012), 76-90.
  • Li, W., Rungsiyakull, C., Zhang, Z., Zhou, S., Swain, M., Ichim, I., Li, Q. (2011). Computational Fracture Modelling in Bioceramic Structures. Advanced Materials Research, 268-270, 853-856.
  • Chen, Y., Cadman, J., Zhou, S., Li, Q. (2011). Computer-aided Design and Fabrication of Bio-mimetic Materials and Scaffold Micro-structures. Advanced Materials Research, 213, 628-632.
  • Chen, Y., Schellekens, M., Zhou, S., Cadman, J., Li, W., Appleyard, R., Li, Q. (2011). Design optimization of scaffold microstructures using wall shear stress criterion towards regulated flow-induced erosion. Journal of Biomechanical Engineering, 133(8), 081008-1-081008-10.
  • Rungsiyakull, C., Rungsiyakull, P., Li, Q., Li, W., Swain, M. (2011). Effects of occlusal inclination and loading on mandibular bone remodeling: a finite element study. The International Journal of Oral and Maxillofacial Implants, 26(3), 527-537.
  • Li, W., Lin, D., Rungsiyakull, C., Zhou, S., Swain, M., Li, Q. (2011). Finite element based bone remodeling and resonance frequency analysis for osseointegration assessment of dental implants. Finite Elements in Analysis and Design, 47(8), 898-905.
  • Zhang, Y., Sun, G., Li, G., Rungsiyakull, C., Li, Q. (2011). Identification of Material Parameters for High Strength Steel Under Impact Loading. Advanced Science Letters, 4(3), 708-714.
  • Rungsiyakull, P., Rungsiyakull, C., Appleyard, R., Li, Q., Swain, M., Klineberg, I. (2011). Loading of a Single Implant in Simulated Bone. International Journal of Prosthodontics, 24(2), 140-143.
  • Chen, Y., Zhou, S., Li, Q. (2011). Mathematical modeling of degradation for bulk-erosive polymers: Applications in tissue engineering scaffolds and drug delivery systems. Acta Biomaterialia, 7(3), 1140-1149.
  • Chen, Y., Zhou, S., Li, Q. (2011). Microstructure design of biodegradable scaffold and its effect on tissue regeneration. Biomaterials, 32(22), 5003-5014.
  • Hou, S., Han, X., Sun, G., Long, S., Li, W., Yang, X., Li, Q. (2011). Multiobjective optimization for tapered circular tubes. Thin Walled Structures, 49(7), 855-863.
  • Li, H., Sun, G., Li, G., Gong, Z., Liu, D., Li, Q. (2011). On twist springback in advanced high-strength steels. Materials and Design, 32(6), 3272-3279.
  • Sun, G., Li, G., Gong, Z., He, G., Li, Q. (2011). Radial basis functional model for multi-objective sheet metal forming optimization. Engineering Optimization, 43(12), 1351-1366.
  • Lau, H., Ruys, A., Carter, P., Wang, X., Li, Q. (2011). Subject Specific Modelling of Electrical Conduction in the Body: a Case Study. Journal of Biomimetics, Biomaterials, and Tissue Engineering, 10, 43-53.
  • Zhou, S., Li, W., Chen, Y., Sun, G., Li, Q. (2011). Topology optimization for negative permeability metamaterials using level-set algorithm. Acta Materialia, 59(7), 2624-2636.
  • Yang, X., Huang, X., Xie, Y., Li, Q., Rong, J. (2011). Topology Optimization of Composite Materials with Optimal Stiffness and Thermal Conductivity. International Journal of Optimization in Civil Engineering, 3, 397-417.
  • Zhou, S., Li, W., Sun, G., Li, Q. (2010). A level-set procedure for the design of electromagnetic metamaterials. Optics Express, 18(7), 6693-6702.
  • Yang, X., Sun, G., Li, Q. (2010). A New NURBS Tool Path Generation Algorithm for Precise Sculptured Surface Machining. Advanced Materials Research, 97-101, 2477-2480.
  • Sun, G., Li, G., Stone, M., Li, Q. (2010). A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials. Computational Materials Science, 49(3), 500-511.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2010). Assessing the Effects of Natural Variations in Microstructure for the Biomimetic Modeling of Cuttlebone. Advanced Materials Research, 123-125, 295-298.
  • Field, C., Li, Q., Li, W., Swain, M. (2010). Biomechanical Response in Mandibular Bone due to Mastication Loading on 3-Unit Fixed Partial Dentures. Journal of Dental Biomechanics, 2010, 902537-1-902537-11.
  • Lin, D., Li, Q., Li, W., Swain, M. (2010). Bone remodeling induced by dental implants of functionally graded materials. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 92B(2), 430-438.
  • Cadman, J., Zhou, S., Chen, Y., Li, W., Appleyard, R., Li, Q. (2010). Characterization of cuttlebone for a biomimetic design of cellular structures. Acta Mechanica Sinica, 26(1), 27-35.
  • Sun, G., Li, G., Hou, S., Zhou, S., Li, W., Li, Q. (2010). Crashworthiness design for functionally graded foam-filled thin-walled structures. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527(7-8), 1911-1919.
  • Sun, G., Li, G., Zhou, S., Li, H., Hou, S., Li, Q. (2010). Crashworthiness design of vehicle by using multiobjective robust optimization. Structural and Multidisciplinary Optimization, 44(1), 99-110.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2010). Creating Biomaterials Inspired by the Microstructure of Cuttlebone. Materials Science Forum, 654-656, 2229-2232.
  • Zhou, S., Li, W., Li, Q. (2010). Design of 3-D Periodic Metamaterials for Electromagnetic Properties. IEEE Transactions on Microwave Theory and Techniques, 58(4), 910-916.
  • Chen, Y., Zhou, S., Cadman, J., Li, Q. (2010). Design of cellular porous biomaterials for wall shear stress criterion. Biotechnology and Bioengineering, 107(4), 737-746.
  • Tammareddi, S., Li, Q. (2010). Effects of Material on the Deployment of Coronary Stents. Advanced Materials Research, 123-125, 315-318.
  • Zhou, S., Li, W., Li, Q. (2010). Level-set based topology optimization for electromagnetic dipole antenna design. Journal of Computational Physics, 229(19), 6915-6930.
  • Lin, D., Li, Q., Li, W., Duckmanton, N., Swain, M. (2010). Mandibular bone remodeling induced by dental implant. Journal of Biomechanics, 43(2), 287-293.
  • Chen, Y., Li, Q. (2010). Mathematical Modeling of Polymer Biodegradation and Erosion. Materials Science Forum, 654-656, 2071-2074.
  • Sun, G., Li, G., Zhou, S., Xu, W., Yang, X., Li, Q. (2010). Multi-fidelity optimization for sheet metal forming process. Structural and Multidisciplinary Optimization, Published Online 30 December 2010, 1-14.
  • Sun, G., Li, G., Gong, Z., Cui, X., Yang, X., Li, Q. (2010). Multiobjective robust optimization method for drawbead design in sheet metal forming. Materials and Design, 31(4), 1917-1929.
  • Chen, Y., Zhou, S., Li, Q. (2010). Multiobjective topology optimization for finite periodic structures. Computers and Structures, 88(11-12), 806-811.
  • Sturm, S., Zhou, S., Mai, Y., Li, Q. (2010). On stiffness of scaffolds for bone tissue engineering - a numerical study. Journal of Biomechanics, 43(9), 1738-1744.
  • Field, C., Li, Q., Li, W., Thompson, M., Swain, M. (2010). Prediction of mandibular bone remodelling induced by fixed partial dentures. Journal of Biomechanics, 43(9), 1771-1779.
  • Zhang, Z., Zhou, S., Li, Q., Li, W., Swain, M. (2010). Residual Stresses in Fabrication of Core-veneered Ceramic Prostheses. Advanced Materials Research, 97-101, 2241-2244.
  • Rungsiyakull, C., Li, Q., Sun, G., Li, W., Swain, M. (2010). Surface morphology optimization for osseointegration of coated implants. Biomaterials, 31(27), 7196-7204.
  • Lin, D., Li, Q., Li, W., Rungsiyakull, P., Swain, M. (2009). Bone Resorption Induced by Dental Implants with Ceramics Crowns. Australasian Ceramic Society. Journal, 45(2), 1-7.
  • Chen, Y., Zhou, S., Li, Q. (2009). Computational Design for Multifunctional Microstructural Composites. International Journal of Modern Physics B: condensed matter physics etc, 23(6 & 7), 1345-1351.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2009). Crashworthiness design for foam filled thin-wall structures. Materials and Design, 30(6), 2024-2032.
  • Lin, D., Li, Q., Li, W., Swain, M. (2009). Dental implant induced bone remodelling and associated algorithms. Journal of the Mechanical Behavior of Biomedical Materials, 2(5), 410-432.
  • Lin, D., Li, Q., Li, W., Zhou, S., Swain, M. (2009). Design optimization of functionally graded dental implant for bone remodeling. Composites Part B: Engineering, 40(7), 668-675.
  • Field, C., Ichim, I., Swain, M., Chan, E., Darendeliler, M., Li, W., Li, Q. (2009). Mechanical responses to orthodontic loading: A 3-dimensional finite element multi-tooth model. American Journal of Orthodontics and Dentofacial Orthopedics, 135(2), 174-181.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2009). Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported Prosthesis. Advanced Materials Research, 79-82, 2167-2170.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2009). Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported Prosthesis. Advanced Materials Research, 79-82, 2167-2170.
  • Rungsiyakull, C., Rungsiyakull, P., Li, Q., Li, W., Swain, M. (2009). The effect of implant-supported all ceramic cantilever bridge on bone remodelling. Australasian Ceramic Society. Journal, 45(1), 1-9.
  • Zhang, Z., Li, Q., Li, W., Swain, M. (2009). Transient Modelling of Thermal Processing for Ceramic Prostheses. Australasian Ceramic Society. Journal, 45(2), 40-48.
  • Liu, Y., Jin, F., Li, Q., Zhou, S. (2008). A fixed-grid bidirectional evolutionary structural optimization method and its applications in tunnelling engineering. International Journal for Numerical Methods in Engineering, 73(12), 1788-1810.
  • Zhou, S., Li, Q. (2008). A microstructure diagram for known bounds in conductivity. Journal of Materials Research, 23(3), 798-811.
  • Liao, X., Li, Q., Yang, X., Li, W., Zhang, W. (2008). A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact. International Journal of Crashworthiness, 13(3), 279-288.
  • Zhou, S., Li, Q. (2008). A variational level set method for the topology optimization of steady-state Navier-Stokes flow. Journal of Computational Physics, 227(24), 10178-10195.
  • Zhou, S., Li, Q. (2008). Computational design of microstructural composites with tailored thermal conductivity. Numerical Heat Transfer Part A-Applications, 54(7), 686-708.
  • Zhou, S., Li, Q. (2008). Computational design of multi-phase microstructural materials for extremal conductivity. Computational Materials Science, 43(3), 549-564.
  • Zhou, S., Li, Q. (2008). Design of graded two-phase microstructures for tailored elasticity gradients. Journal of Materials Science, 43(15), 5157-5167.
  • Patil, S., Zhou, S., Li, Q. (2008). Design Of Periodic Microstructural Materials By Using Evolutionary Structural Optimization Method. Advanced Materials Research, 32, 279-283.
  • Rungsiyakull, C., Li, Q., Li, W., Appleyard, R., Swain, M. (2008). Effect of Fully Porous-Coated (FPC) Technique on Osseointegration of Dental Implants. Advanced Materials Research, 32, 189-192.
  • Rungsiyakull, C., Li, Q., Li, W., Appleyard, R., Swain, M. (2008). Effect of Particle size of Fully Porous-Coated (FPC) Implants on Osseointegration. Advanced Materials Research, 47-50, 916-919.
  • Lin, D., Li, Q., Li, W., Swain, M. (2008). Functionally Graded Dental Implant and Its Effect on Bone Remodeling. Advanced Materials Research, 47-50, 1035-1038.
  • Field, C., Li, Q., Li, W., Swain, M. (2008). Influence of tooth removal on mandibular bone response to mastication. Archives of Oral Biology, 53, 1129-1137.
  • Zhou, S., Li, Q. (2008). Microstructural design of connective base cells for functionally graded materials. Materials Letters, 62(24), 4022-4024.
  • Liao, X., Li, Q., Yang, X., Zhang, W., Li, W. (2008). Multiobjective optimization for crash safety design of vehicles using stepwise regression model. Structural and Multidisciplinary Optimization, 35, 561-569.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2008). Multiobjective optimization of multi-cell sections for the crashworthiness design. International Journal of Impact Engineering, 35(11), 1355-1367.
  • Zhou, S., Li, Q. (2008). The Design of Functional Gradient Materials with Inverse Homogenization method. Advanced Materials Research, 32, 245-250.
  • Lin, D., Li, Q., Li, W., Ichim, I., Swain, M. (2007). Damage Evaluation of Bone Tissues with Dental Implants. Key Engineering Materials, 348-349, 905-908.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2007). Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria. Finite Elements in Analysis and Design, 43(6-7), 555-565.
  • Ichim, I., Li, Q., Li, W., Swain, M., Kieser, J. (2007). Modelling of fracture behaviour in biomaterials. Biomaterials, 28(7), 1317-1326.
  • Ichim, I., Li, Q., Loughran, J., Swain, M., Kieser, J. (2007). Restoration of non-carious cervical lesions. Part I. Modelling of restorative fracture. Dental Materials, 23(12), 1553-1561.
  • Ichim, I., Schmidlin, P., Li, Q., Kieser, J., Swain, M. (2007). Restoration of non-carious cervical lesions. Part II. Restorative material selection to minimise fracture. Dental Materials, 23(12), 1562-1569.
  • Zhou, S., Li, Q. (2007). The relation of constant mean curvature surfaces to multiphase composites with extremal thermal conductivity. Journal of Physics D: Applied Physics, 40(19), 6083-6093.
  • de Kruijf, N., Zhou, S., Li, Q., Mai, Y. (2007). Topological design of structures and composite materials with multiobjectives. International Journal of Solids and Structures, 44(22-23), 7092-7109.
  • Li, Q., Loughran, J., Peng, Z., Osborne, J. (2006). A Fracture Based Model for Wear Debris Formation. Key Engineering Materials, 324-325, 1157-1160.
  • Liu, Y., Jin, F., Li, Q. (2006). A Strength-Based Multiple Cutout Optimization in Composite Plates Using Fixed Grid Finite Element Method. Composite Structures, 73, 403-412.
  • Li, W., Li, Q., Loughran, J., Swain, M., Ichim, I., Fujisawa, N. (2006). Contact-driven crack formation in dental ceramic materials. Key Engineering Materials, 324-325, 1257-1260.
  • Li, Q., Ichim, I., Loughran, J., Li, W., Swain, M., Kieser, J. (2006). Numerical simulation of crack formation in all ceramic dental bridge. Key Engineering Materials, 312, 293-298.
  • Li, W., Li, Q., Steven, G., Xie, Y. (2005). An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194(30-33), 3394-3415.
  • Li, W., Swain, M., Li, Q., Steven, G. (2005). Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 74B(1), 520-528.
  • Li, W., Li, Q., Steven, G., Xie, Y. (2003). An evolutionary approach to elastic contact optimization of frame structures. Finite Elements in Analysis and Design, 40(1), 61-81.
  • Li, W., Li, Q., Steven, G., Xie, Y. (2003). An evolutionary shape optimization procedure for contact problems in mechanical designs. Institution of Mechanical Engineers. Proceedings. Part C, 217, 435-446.
  • Steven, G., Li, Q., Xie, Y. (2002). Multicriteria optimization that minimizes maximum stress and maximizes stiffness. Computers and Structures, 80(27-30), 2433-2448.
  • Li, Q., Steven, G., Xie, Y. (2001). A simple checkerboard suppression algorithm for evolutionary structural optimization. Structural and Multidisciplinary Optimization, 22, 230-239.
  • Li, Q., Steven, G., Xie, Y. (2001). Evolutionary structural optimization for connection topology design of multi-component systems. Engineering Computations, 18(3/4), 460-479.
  • Li, Q., Steven, G., Xie, Y. (2001). Evolutionary thickness design with stiffness maximization and stress minimization criteria. International Journal for Numerical Methods in Engineering, 52, 979-995.
  • Li, Q., Steven, G., Querin, O., Xie, Y. (2001). Stress based optimization of torsional shafts using an evolutionary procedure. International Journal of Solids and Structures, 38, 5661-5677.
  • Li, Q., Steven, G., Xie, Y. (2001). Thermoelastic topology optimization for problems with varying temperature fields. Journal of Thermal Stresses, 24, 347-366.

Conferences

  • Huang, X., Zhou, S., Xie, Y., Li, Q. (2012). Concurrent topology optimization of macrostructures and periodic microstructures of materials. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Liu, Q., Li, J., Zong, Z., Sun, G., Li, Q. (2012). Experimental and numerical investigation on crashworthiness of double hat shaped CFRP tubes. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Wong, P., Li, Q., Carter, P. (2012). Incorporating Vascular Structure Into Electric Volume Conduction Models of the Cochlea. 2012 IEEE EMBS Conference on Biomedical Engineering & Sciences, Piscataway, New Jersey: IEEE.
  • Chang, C., Zhou, S., Li, Q. (2012). Level-Set Based Shape Optimisation by Iso-surface Modelling. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Zhou, S., Huang, X., Xie, Y., Lin, S., Li, Q. (2012). The design of negative electric permittivity with level set method. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Tammareddi, S., Li, Q. (2011). An inverse approach to shape optimization for design of cardiovascular stents. 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan: CD Proceedings.
  • Tran, P., Li, Q., Carter, P. (2011). Finite Element Modeling of Current Flow from Cochlear Implant Stimulation. IASTED International Conference on Modelling, Simulation, and Identification (MSI 2011), Pittsburgh, USA: ACTA Press.
  • Li, W., Rungsiyakull, C., Field, C., Lin, D., Zhang, Z., Li, Q., Swain, M. (2010). Computational biomechanics of bone's responses to dental prostheses - osseointegration, remodeling and resorption. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Tammareddi, S., Sun, G., Li, Q. (2010). Computational design analysis for deployment of cardiovascular stents. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2010). Multiscale Bone Remodeling Simulation of Single and Cantilever Implant-supported Fixed Dental Prosthesis. 1st International Conference on Applied Bionics and Biomechanics ICABB-2010, Online: ICABB.
  • Zhou, S., Li, W., Li, Q. (2010). Sensitivity analysis for electromagnetic topology optimization problems. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Li, Q., Yu, J., Schellekens, M., Zhou, S., Li, W., Armfield, S., Appleyard, R. (2009). Characterization and Design of 3D Scaffolds for Biofluidic Criteria. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Chen, Y., Zhou, S., Li, Q. (2009). Level-set Based Topology Optimization of Micro-fluidic Wall Shear Stress in Tissue Engineering. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, Portugal: Guide- Artes Graficas, Lda.
  • Li, W., Lin, D., Li, Q., Swain, M. (2009). Monitoring Natural Frequency for Osseointegration and Bone Remodeling Induced by Dental Implants. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Chen, K., Li, Q., Li, W., Lau, H., Ruys, A., Carter, P. (2009). Three-Dimensional finite element modeling of cochlear implant induced electrical current flows. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2009). Topological Optimization of Cellular Structures, Learnt from Cuttlefish. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, Portugal: Guide- Artes Graficas, Lda.
  • Li, W., Lin, D., Li, Q., Swain, M. (2008). Bone remodelling due to dental prosthesis. Joint 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), online: WCCM8 and ECCOMAS.
  • Zhou, S., Li, Q. (2008). Level-set based topological optimization for steady-state navier stokes flow. Joint 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), online: WCCM8 and ECCOMAS.
  • Lin, D., Li, Q., Li, W., Ichim, I., Swain, M. (2007). Biomechanical Evaluation of the Effect of Bone Remodeling on Dental Implantation using Finite Element Analysis. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • Lin, D., Li, Q., Li, W., Swain, M., Ichim, I. (2007). Evaluation of dental implant induced bone remodelling by using a 2D Finite element model. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • Hou, S., Li, Q., Long, S., Li, G. (2007). Optimization Design of S-shaped Front Rail under Impact Loading with Crashworthiness Criterion. 7th World Congress on Structural and Multidisciplinary Opimization. International Society for Structural and Multidisciplinary Optimization.
  • Farnoush, A., Li, Q. (2007). Three dimensional nonlinear finite element analysis of the newly designed cardiovascular stent. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • Li, Q., Zhou, S. (2007). Topology Optimization in the Design of Microstructure Composites with Tailored Thermal Conductivity. 7th World Congress on Structural and Multidisciplinary Opimization. International Society for Structural and Multidisciplinary Optimization.
  • Li, W., Li, Q., Loughran, J., Ichim, I., Swain, M. (2006). A Continuum to Discrete Modelling Technique for All-Ceramic Dental Restorations. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.
  • Hou, S., Li, Q., Long, S., Li, W. (2006). Computational Design of Beam Sections under Impact Loading. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Li, Q., Hou, S., Long, S., Li, W. (2006). Design Optimization of Square Tapered Beam Sections under Impact Loading and Crashworthiness Criterion. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.
  • Chen, X., Li, Q., Long, S., Yang, S. (2006). Evolutionary Topological Design of Frame for Impact Loads. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Liao, X., Li, Q., Zhang, W. (2006). Optimization Studies for Crashworthiness Design Using Response Surface Method. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Zhou, S., Li, Q. (2006). Topological design of microstructure composites for tailored conductivity. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.
  • Li, Q., Proos, K., Steven, G., Xie, Y. (2002). The role of Physical sensitivity in evolutionary topology design optimisation with multi-criteria and multi-physics. Proc. 5th World Congress on Computational Mechanics, Vienna: Vienna University of Technology.
  • Li, Q., Steven, G., Xie, Y., Querin, O. (2001). Disceret sensitivity analysis for evolutionary topology optimization of thermal field. 3rd ASMO UK/ISSMO Conference on Engineering Design Optimization, : Ads & Adea.

2013

  • Song, X., Sun, G., Li, G., Gao, W., Li, Q. (2013). Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models. Structural and Multidisciplinary Optimization, 47(2), 221-231.
  • Liu, Q., Lin, Y., Zong, Z., Sun, G., Li, Q. (2013). Lightweight design of carbon twill weave fabric composite body structure for electric vehicle. Composite Structures, 97, 231-238.
  • Gu, X., Sun, G., Li, G., Huang, X., Li, Y., Li, Q. (2013). Multiobjective optimization design for vehicle occupant restraint system under frontal impact. Structural and Multidisciplinary Optimization, 47(3), 465-477.
  • Cadman, J., Zhou, S., Chen, Y., Li, Q. (2013). On design of multi-functional microstructural materials. Journal of Materials Science, 48, 51-66.
  • Ahmad, R., Abu-Hassan, M., Li, Q., Swain, M. (2013). Three dimensional quantification of mandibular bone remodeling using standard tessellation language registration based superimposition. Clinical Oral Implants Research.
  • Sarrafpour, B., Swain, M., Li, Q., Zoellner, H. (2013). Tooth eruption results from bone remodelling driven by bite forces sensed by soft tissue dental follicles: A finite element analysis. PLoS One, 8(3), e58803.

2012

  • Field, C., Li, Q., Li, W., Thompson, M., Swain, M. (2012). A comparative mechanical and bone remodelling study of all-ceramic posterior inlay and onlay fixed partial dentures. Journal of Dentistry, 40(1), 48-56.
  • Huang, X., Zhou, S., Xie, Y., Li, Q. (2012). Concurrent topology optimization of macrostructures and periodic microstructures of materials. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Cadman, J., Zhou, S., Chen, Y., Li, Q. (2012). Cuttlebone: Characterisation, Application and Development of Biomimetic Materials. Journal of Bionic Engineering, 9(3), 367-376.
  • Zhou, S., Cadman, J., Chen, Y., Li, W., Xie, Y., Huang, X., Appleyard, R., Sun, G., Li, Q. (2012). Design and fabrication of biphasic cellular materials with transport properties - A modified bidirectional evolutionary structural optimization procedure and MATLAB program. International Journal of Heat and Mass Transfer, 55(25–26), 8149-8162.
  • Mostofi Zadeh Farahani, R., Sarrafpour, B., Simonian, M., Li, Q., Hunter, N. (2012). Directed glia-assisted angiogenesis in a mature neurosensory structure: Pericytes mediate an adaptive response in human dental pulp that maintains blood-barrier function. The Journal of Comparative Neurology, 520(17), 3803-3826.
  • Huang, X., Xie, Y., Jia, B., Li, Q., Zhou, S. (2012). Evolutionary topology optimization of periodic composites for extremal magnetic permeability and electrical permittivity. Structural and Multidisciplinary Optimization, 46(3), 385-398.
  • Liu, Q., Li, J., Zong, Z., Sun, G., Li, Q. (2012). Experimental and numerical investigation on crashworthiness of double hat shaped CFRP tubes. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Sarrafpour, B., Rungsiyakull, C., Swain, M., Li, Q., Zoellner, H. (2012). Finite element analysis suggests functional bone strain accounts for continuous post-eruptive emergence of teeth. Archives of Oral Biology, 57(8), 1070-1078.
  • Xie, K., Yang, L., Chen, K., Li, Q. (2012). In vitro study of the effect of cyclic strains on the dermal fibroblast (GM3384) morphology-Mapping of cell responses to strain field. Medical Engineering and Physics, 34(7), 826-831.
  • Wong, P., Li, Q., Carter, P. (2012). Incorporating Vascular Structure Into Electric Volume Conduction Models of the Cochlea. 2012 IEEE EMBS Conference on Biomedical Engineering & Sciences, Piscataway, New Jersey: IEEE.
  • Chang, C., Zhou, S., Li, Q. (2012). Level-Set Based Shape Optimisation by Iso-surface Modelling. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Zhang, Y., Sun, G., Li, G., Luo, Z., Li, Q. (2012). Optimization of Foam-Filled Bitubal Structures for Crashworthiness Criteria. Materials and Design, 38(June 2012), 99-109.
  • Zhang, Z., Zhou, S., Li, Q., Li, W., Swain, M. (2012). Sensitivity analysis of bi-layered ceramic dental restorations. Dental Materials, 28(2), e6-e14.
  • Zhou, S., Huang, X., Xie, Y., Lin, S., Li, Q. (2012). The design of negative electric permittivity with level set method. The 4th International Conference on Computational Methods (ICCM2012), Gold Coast: ICCM2012 Organising Committee.
  • Sun, G., Li, G., Li, Q. (2012). Variable fidelity design based surrogate and artificial bee colony algorithm for sheet metal forming process. Finite Elements in Analysis and Design, 59(October 2012), 76-90.

2011

  • Tammareddi, S., Li, Q. (2011). An inverse approach to shape optimization for design of cardiovascular stents. 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan: CD Proceedings.
  • Li, W., Rungsiyakull, C., Zhang, Z., Zhou, S., Swain, M., Ichim, I., Li, Q. (2011). Computational Fracture Modelling in Bioceramic Structures. Advanced Materials Research, 268-270, 853-856.
  • Chen, Y., Cadman, J., Zhou, S., Li, Q. (2011). Computer-aided Design and Fabrication of Bio-mimetic Materials and Scaffold Micro-structures. Advanced Materials Research, 213, 628-632.
  • Chen, Y., Schellekens, M., Zhou, S., Cadman, J., Li, W., Appleyard, R., Li, Q. (2011). Design optimization of scaffold microstructures using wall shear stress criterion towards regulated flow-induced erosion. Journal of Biomechanical Engineering, 133(8), 081008-1-081008-10.
  • Rungsiyakull, C., Rungsiyakull, P., Li, Q., Li, W., Swain, M. (2011). Effects of occlusal inclination and loading on mandibular bone remodeling: a finite element study. The International Journal of Oral and Maxillofacial Implants, 26(3), 527-537.
  • Li, W., Lin, D., Rungsiyakull, C., Zhou, S., Swain, M., Li, Q. (2011). Finite element based bone remodeling and resonance frequency analysis for osseointegration assessment of dental implants. Finite Elements in Analysis and Design, 47(8), 898-905.
  • Tran, P., Li, Q., Carter, P. (2011). Finite Element Modeling of Current Flow from Cochlear Implant Stimulation. IASTED International Conference on Modelling, Simulation, and Identification (MSI 2011), Pittsburgh, USA: ACTA Press.
  • Zhang, Y., Sun, G., Li, G., Rungsiyakull, C., Li, Q. (2011). Identification of Material Parameters for High Strength Steel Under Impact Loading. Advanced Science Letters, 4(3), 708-714.
  • Rungsiyakull, P., Rungsiyakull, C., Appleyard, R., Li, Q., Swain, M., Klineberg, I. (2011). Loading of a Single Implant in Simulated Bone. International Journal of Prosthodontics, 24(2), 140-143.
  • Chen, Y., Zhou, S., Li, Q. (2011). Mathematical modeling of degradation for bulk-erosive polymers: Applications in tissue engineering scaffolds and drug delivery systems. Acta Biomaterialia, 7(3), 1140-1149.
  • Chen, Y., Zhou, S., Li, Q. (2011). Microstructure design of biodegradable scaffold and its effect on tissue regeneration. Biomaterials, 32(22), 5003-5014.
  • Hou, S., Han, X., Sun, G., Long, S., Li, W., Yang, X., Li, Q. (2011). Multiobjective optimization for tapered circular tubes. Thin Walled Structures, 49(7), 855-863.
  • Li, H., Sun, G., Li, G., Gong, Z., Liu, D., Li, Q. (2011). On twist springback in advanced high-strength steels. Materials and Design, 32(6), 3272-3279.
  • Sun, G., Li, G., Gong, Z., He, G., Li, Q. (2011). Radial basis functional model for multi-objective sheet metal forming optimization. Engineering Optimization, 43(12), 1351-1366.
  • Lau, H., Ruys, A., Carter, P., Wang, X., Li, Q. (2011). Subject Specific Modelling of Electrical Conduction in the Body: a Case Study. Journal of Biomimetics, Biomaterials, and Tissue Engineering, 10, 43-53.
  • Zhou, S., Li, W., Chen, Y., Sun, G., Li, Q. (2011). Topology optimization for negative permeability metamaterials using level-set algorithm. Acta Materialia, 59(7), 2624-2636.
  • Yang, X., Huang, X., Xie, Y., Li, Q., Rong, J. (2011). Topology Optimization of Composite Materials with Optimal Stiffness and Thermal Conductivity. International Journal of Optimization in Civil Engineering, 3, 397-417.

2010

  • Zhou, S., Li, W., Sun, G., Li, Q. (2010). A level-set procedure for the design of electromagnetic metamaterials. Optics Express, 18(7), 6693-6702.
  • Yang, X., Sun, G., Li, Q. (2010). A New NURBS Tool Path Generation Algorithm for Precise Sculptured Surface Machining. Advanced Materials Research, 97-101, 2477-2480.
  • Sun, G., Li, G., Stone, M., Li, Q. (2010). A two-stage multi-fidelity optimization procedure for honeycomb-type cellular materials. Computational Materials Science, 49(3), 500-511.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2010). Assessing the Effects of Natural Variations in Microstructure for the Biomimetic Modeling of Cuttlebone. Advanced Materials Research, 123-125, 295-298.
  • Field, C., Li, Q., Li, W., Swain, M. (2010). Biomechanical Response in Mandibular Bone due to Mastication Loading on 3-Unit Fixed Partial Dentures. Journal of Dental Biomechanics, 2010, 902537-1-902537-11.
  • Lin, D., Li, Q., Li, W., Swain, M. (2010). Bone remodeling induced by dental implants of functionally graded materials. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 92B(2), 430-438.
  • Cadman, J., Zhou, S., Chen, Y., Li, W., Appleyard, R., Li, Q. (2010). Characterization of cuttlebone for a biomimetic design of cellular structures. Acta Mechanica Sinica, 26(1), 27-35.
  • Li, W., Rungsiyakull, C., Field, C., Lin, D., Zhang, Z., Li, Q., Swain, M. (2010). Computational biomechanics of bone's responses to dental prostheses - osseointegration, remodeling and resorption. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Tammareddi, S., Sun, G., Li, Q. (2010). Computational design analysis for deployment of cardiovascular stents. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Sun, G., Li, G., Hou, S., Zhou, S., Li, W., Li, Q. (2010). Crashworthiness design for functionally graded foam-filled thin-walled structures. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527(7-8), 1911-1919.
  • Sun, G., Li, G., Zhou, S., Li, H., Hou, S., Li, Q. (2010). Crashworthiness design of vehicle by using multiobjective robust optimization. Structural and Multidisciplinary Optimization, 44(1), 99-110.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2010). Creating Biomaterials Inspired by the Microstructure of Cuttlebone. Materials Science Forum, 654-656, 2229-2232.
  • Zhou, S., Li, W., Li, Q. (2010). Design of 3-D Periodic Metamaterials for Electromagnetic Properties. IEEE Transactions on Microwave Theory and Techniques, 58(4), 910-916.
  • Chen, Y., Zhou, S., Cadman, J., Li, Q. (2010). Design of cellular porous biomaterials for wall shear stress criterion. Biotechnology and Bioengineering, 107(4), 737-746.
  • Chen, Y., Cadman, J., Li, Q. (2010). Effect of Scaffold Architecture on Tissue Regeneration. In Lim, C T & Goh, J C H (Eds.), 6th World Congress of Biomechanics (WCB 2010) August 1 - 6, 2010 Singapore: In Conjunction with 14th International Conference on Biomedical Engineering (ICBME) and 5th Asia Pacific Conference on Biomechanics (APBiomech), (pp. 815-818). Berlin: Springer.
  • Tammareddi, S., Li, Q. (2010). Effects of Material on the Deployment of Coronary Stents. Advanced Materials Research, 123-125, 315-318.
  • Zhou, S., Li, W., Li, Q. (2010). Level-set based topology optimization for electromagnetic dipole antenna design. Journal of Computational Physics, 229(19), 6915-6930.
  • Lin, D., Li, Q., Li, W., Duckmanton, N., Swain, M. (2010). Mandibular bone remodeling induced by dental implant. Journal of Biomechanics, 43(2), 287-293.
  • Chen, Y., Li, Q. (2010). Mathematical Modeling of Polymer Biodegradation and Erosion. Materials Science Forum, 654-656, 2071-2074.
  • Sun, G., Li, G., Zhou, S., Xu, W., Yang, X., Li, Q. (2010). Multi-fidelity optimization for sheet metal forming process. Structural and Multidisciplinary Optimization, Published Online 30 December 2010, 1-14.
  • Sun, G., Li, G., Gong, Z., Cui, X., Yang, X., Li, Q. (2010). Multiobjective robust optimization method for drawbead design in sheet metal forming. Materials and Design, 31(4), 1917-1929.
  • Chen, Y., Zhou, S., Li, Q. (2010). Multiobjective topology optimization for finite periodic structures. Computers and Structures, 88(11-12), 806-811.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2010). Multiscale Bone Remodeling Simulation of Single and Cantilever Implant-supported Fixed Dental Prosthesis. 1st International Conference on Applied Bionics and Biomechanics ICABB-2010, Online: ICABB.
  • Sturm, S., Zhou, S., Mai, Y., Li, Q. (2010). On stiffness of scaffolds for bone tissue engineering - a numerical study. Journal of Biomechanics, 43(9), 1738-1744.
  • Field, C., Li, Q., Li, W., Thompson, M., Swain, M. (2010). Prediction of mandibular bone remodelling induced by fixed partial dentures. Journal of Biomechanics, 43(9), 1771-1779.
  • Zhang, Z., Zhou, S., Li, Q., Li, W., Swain, M. (2010). Residual Stresses in Fabrication of Core-veneered Ceramic Prostheses. Advanced Materials Research, 97-101, 2241-2244.
  • Zhou, S., Li, W., Li, Q. (2010). Sensitivity analysis for electromagnetic topology optimization problems. 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics WCCM-APCOM 2010, Bristol, UK: IOP Publishing.
  • Rungsiyakull, C., Li, Q., Sun, G., Li, W., Swain, M. (2010). Surface morphology optimization for osseointegration of coated implants. Biomaterials, 31(27), 7196-7204.

2009

  • Lin, D., Li, Q., Li, W., Rungsiyakull, P., Swain, M. (2009). Bone Resorption Induced by Dental Implants with Ceramics Crowns. Australasian Ceramic Society. Journal, 45(2), 1-7.
  • Li, Q., Yu, J., Schellekens, M., Zhou, S., Li, W., Armfield, S., Appleyard, R. (2009). Characterization and Design of 3D Scaffolds for Biofluidic Criteria. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Chen, Y., Zhou, S., Li, Q. (2009). Computational Design for Multifunctional Microstructural Composites. International Journal of Modern Physics B: condensed matter physics etc, 23(6 & 7), 1345-1351.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2009). Crashworthiness design for foam filled thin-wall structures. Materials and Design, 30(6), 2024-2032.
  • Lin, D., Li, Q., Li, W., Swain, M. (2009). Dental implant induced bone remodelling and associated algorithms. Journal of the Mechanical Behavior of Biomedical Materials, 2(5), 410-432.
  • Lin, D., Li, Q., Li, W., Zhou, S., Swain, M. (2009). Design optimization of functionally graded dental implant for bone remodeling. Composites Part B: Engineering, 40(7), 668-675.
  • Chen, Y., Zhou, S., Li, Q. (2009). Level-set Based Topology Optimization of Micro-fluidic Wall Shear Stress in Tissue Engineering. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, Portugal: Guide- Artes Graficas, Lda.
  • Field, C., Ichim, I., Swain, M., Chan, E., Darendeliler, M., Li, W., Li, Q. (2009). Mechanical responses to orthodontic loading: A 3-dimensional finite element multi-tooth model. American Journal of Orthodontics and Dentofacial Orthopedics, 135(2), 174-181.
  • Li, W., Lin, D., Li, Q., Swain, M. (2009). Monitoring Natural Frequency for Osseointegration and Bone Remodeling Induced by Dental Implants. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2009). Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported Prosthesis. Advanced Materials Research, 79-82, 2167-2170.
  • Rungsiyakull, C., Li, Q., Li, W., Swain, M. (2009). Multiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported Prosthesis. Advanced Materials Research, 79-82, 2167-2170.
  • Rungsiyakull, C., Rungsiyakull, P., Li, Q., Li, W., Swain, M. (2009). The effect of implant-supported all ceramic cantilever bridge on bone remodelling. Australasian Ceramic Society. Journal, 45(1), 1-9.
  • Chen, K., Li, Q., Li, W., Lau, H., Ruys, A., Carter, P. (2009). Three-Dimensional finite element modeling of cochlear implant induced electrical current flows. IEEE International Conference on Computational Intelligence for Measurement Systems and Applications CIMSA 2009, United States: (IEEE) Institute of Electrical and Electronics Engineers.
  • Cadman, J., Chen, Y., Zhou, S., Li, Q. (2009). Topological Optimization of Cellular Structures, Learnt from Cuttlefish. 8th World Congress on Structural and Multidisciplinary Optimization (WCSMO-8), Lisboa, Portugal: Guide- Artes Graficas, Lda.
  • Zhang, Z., Li, Q., Li, W., Swain, M. (2009). Transient Modelling of Thermal Processing for Ceramic Prostheses. Australasian Ceramic Society. Journal, 45(2), 40-48.

2008

  • Liu, Y., Jin, F., Li, Q., Zhou, S. (2008). A fixed-grid bidirectional evolutionary structural optimization method and its applications in tunnelling engineering. International Journal for Numerical Methods in Engineering, 73(12), 1788-1810.
  • Zhou, S., Li, Q. (2008). A microstructure diagram for known bounds in conductivity. Journal of Materials Research, 23(3), 798-811.
  • Liao, X., Li, Q., Yang, X., Li, W., Zhang, W. (2008). A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact. International Journal of Crashworthiness, 13(3), 279-288.
  • Zhou, S., Li, Q. (2008). A variational level set method for the topology optimization of steady-state Navier-Stokes flow. Journal of Computational Physics, 227(24), 10178-10195.
  • Li, W., Lin, D., Li, Q., Swain, M. (2008). Bone remodelling due to dental prosthesis. Joint 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), online: WCCM8 and ECCOMAS.
  • Zhou, S., Li, Q. (2008). Computational design of microstructural composites with tailored thermal conductivity. Numerical Heat Transfer Part A-Applications, 54(7), 686-708.
  • Zhou, S., Li, Q. (2008). Computational design of multi-phase microstructural materials for extremal conductivity. Computational Materials Science, 43(3), 549-564.
  • Zhou, S., Li, Q. (2008). Design of graded two-phase microstructures for tailored elasticity gradients. Journal of Materials Science, 43(15), 5157-5167.
  • Patil, S., Zhou, S., Li, Q. (2008). Design Of Periodic Microstructural Materials By Using Evolutionary Structural Optimization Method. Advanced Materials Research, 32, 279-283.
  • Rungsiyakull, C., Li, Q., Li, W., Appleyard, R., Swain, M. (2008). Effect of Fully Porous-Coated (FPC) Technique on Osseointegration of Dental Implants. Advanced Materials Research, 32, 189-192.
  • Rungsiyakull, C., Li, Q., Li, W., Appleyard, R., Swain, M. (2008). Effect of Particle size of Fully Porous-Coated (FPC) Implants on Osseointegration. Advanced Materials Research, 47-50, 916-919.
  • Lin, D., Li, Q., Li, W., Swain, M. (2008). Functionally Graded Dental Implant and Its Effect on Bone Remodeling. Advanced Materials Research, 47-50, 1035-1038.
  • Field, C., Li, Q., Li, W., Swain, M. (2008). Influence of tooth removal on mandibular bone response to mastication. Archives of Oral Biology, 53, 1129-1137.
  • Zhou, S., Li, Q. (2008). Level-set based topological optimization for steady-state navier stokes flow. Joint 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), online: WCCM8 and ECCOMAS.
  • Zhou, S., Li, Q. (2008). Microstructural design of connective base cells for functionally graded materials. Materials Letters, 62(24), 4022-4024.
  • Liao, X., Li, Q., Yang, X., Zhang, W., Li, W. (2008). Multiobjective optimization for crash safety design of vehicles using stepwise regression model. Structural and Multidisciplinary Optimization, 35, 561-569.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2008). Multiobjective optimization of multi-cell sections for the crashworthiness design. International Journal of Impact Engineering, 35(11), 1355-1367.
  • Zhou, S., Li, Q. (2008). The Design of Functional Gradient Materials with Inverse Homogenization method. Advanced Materials Research, 32, 245-250.

2007

  • Lin, D., Li, Q., Li, W., Ichim, I., Swain, M. (2007). Biomechanical Evaluation of the Effect of Bone Remodeling on Dental Implantation using Finite Element Analysis. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • Lin, D., Li, Q., Li, W., Ichim, I., Swain, M. (2007). Damage Evaluation of Bone Tissues with Dental Implants. Key Engineering Materials, 348-349, 905-908.
  • Hou, S., Li, Q., Long, S., Yang, X., Li, W. (2007). Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria. Finite Elements in Analysis and Design, 43(6-7), 555-565.
  • Lin, D., Li, Q., Li, W., Swain, M., Ichim, I. (2007). Evaluation of dental implant induced bone remodelling by using a 2D Finite element model. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • Ichim, I., Li, Q., Li, W., Swain, M., Kieser, J. (2007). Modelling of fracture behaviour in biomaterials. Biomaterials, 28(7), 1317-1326.
  • Hou, S., Li, Q., Long, S., Li, G. (2007). Optimization Design of S-shaped Front Rail under Impact Loading with Crashworthiness Criterion. 7th World Congress on Structural and Multidisciplinary Opimization. International Society for Structural and Multidisciplinary Optimization.
  • Ichim, I., Li, Q., Loughran, J., Swain, M., Kieser, J. (2007). Restoration of non-carious cervical lesions. Part I. Modelling of restorative fracture. Dental Materials, 23(12), 1553-1561.
  • Ichim, I., Schmidlin, P., Li, Q., Kieser, J., Swain, M. (2007). Restoration of non-carious cervical lesions. Part II. Restorative material selection to minimise fracture. Dental Materials, 23(12), 1562-1569.
  • Zhou, S., Li, Q. (2007). The relation of constant mean curvature surfaces to multiphase composites with extremal thermal conductivity. Journal of Physics D: Applied Physics, 40(19), 6083-6093.
  • Farnoush, A., Li, Q. (2007). Three dimensional nonlinear finite element analysis of the newly designed cardiovascular stent. Fifth Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia: Engineers Australia.
  • de Kruijf, N., Zhou, S., Li, Q., Mai, Y. (2007). Topological design of structures and composite materials with multiobjectives. International Journal of Solids and Structures, 44(22-23), 7092-7109.
  • Li, Q., Zhou, S. (2007). Topology Optimization in the Design of Microstructure Composites with Tailored Thermal Conductivity. 7th World Congress on Structural and Multidisciplinary Opimization. International Society for Structural and Multidisciplinary Optimization.

2006

  • Li, W., Li, Q., Loughran, J., Ichim, I., Swain, M. (2006). A Continuum to Discrete Modelling Technique for All-Ceramic Dental Restorations. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.
  • Li, Q., Loughran, J., Peng, Z., Osborne, J. (2006). A Fracture Based Model for Wear Debris Formation. Key Engineering Materials, 324-325, 1157-1160.
  • Liu, Y., Jin, F., Li, Q. (2006). A Strength-Based Multiple Cutout Optimization in Composite Plates Using Fixed Grid Finite Element Method. Composite Structures, 73, 403-412.
  • Hou, S., Li, Q., Long, S., Li, W. (2006). Computational Design of Beam Sections under Impact Loading. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Li, W., Li, Q., Loughran, J., Swain, M., Ichim, I., Fujisawa, N. (2006). Contact-driven crack formation in dental ceramic materials. Key Engineering Materials, 324-325, 1257-1260.
  • Li, Q., Hou, S., Long, S., Li, W. (2006). Design Optimization of Square Tapered Beam Sections under Impact Loading and Crashworthiness Criterion. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.
  • Chen, X., Li, Q., Long, S., Yang, S. (2006). Evolutionary Topological Design of Frame for Impact Loads. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Li, Q., Ichim, I., Loughran, J., Li, W., Swain, M., Kieser, J. (2006). Numerical simulation of crack formation in all ceramic dental bridge. Key Engineering Materials, 312, 293-298.
  • Liao, X., Li, Q., Zhang, W. (2006). Optimization Studies for Crashworthiness Design Using Response Surface Method. 10th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science, Beijing, China: Springer & Tsinghua University Press.
  • Zhou, S., Li, Q. (2006). Topological design of microstructure composites for tailored conductivity. 7th World Congress on Computational Mechanics, Los Angeles: OmniPress.

2005

  • Li, W., Li, Q., Steven, G., Xie, Y. (2005). An evolutionary shape optimization for elastic contact problems subject to multiple load cases. Computer Methods in Applied Mechanics and Engineering, 194(30-33), 3394-3415.
  • Li, W., Swain, M., Li, Q., Steven, G. (2005). Towards automated 3D finite element modeling of direct fiber reinforced composite dental bridge. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 74B(1), 520-528.

2003

  • Li, W., Li, Q., Steven, G., Xie, Y. (2003). An evolutionary approach to elastic contact optimization of frame structures. Finite Elements in Analysis and Design, 40(1), 61-81.
  • Li, W., Li, Q., Steven, G., Xie, Y. (2003). An evolutionary shape optimization procedure for contact problems in mechanical designs. Institution of Mechanical Engineers. Proceedings. Part C, 217, 435-446.

2002

  • Steven, G., Li, Q., Xie, Y. (2002). Multicriteria optimization that minimizes maximum stress and maximizes stiffness. Computers and Structures, 80(27-30), 2433-2448.
  • Li, Q., Proos, K., Steven, G., Xie, Y. (2002). The role of Physical sensitivity in evolutionary topology design optimisation with multi-criteria and multi-physics. Proc. 5th World Congress on Computational Mechanics, Vienna: Vienna University of Technology.

2001

  • Li, Q., Steven, G., Xie, Y. (2001). A simple checkerboard suppression algorithm for evolutionary structural optimization. Structural and Multidisciplinary Optimization, 22, 230-239.
  • Li, Q., Steven, G., Xie, Y., Querin, O. (2001). Disceret sensitivity analysis for evolutionary topology optimization of thermal field. 3rd ASMO UK/ISSMO Conference on Engineering Design Optimization, : Ads & Adea.
  • Li, Q., Steven, G., Xie, Y. (2001). Evolutionary structural optimization for connection topology design of multi-component systems. Engineering Computations, 18(3/4), 460-479.
  • Li, Q., Steven, G., Xie, Y. (2001). Evolutionary thickness design with stiffness maximization and stress minimization criteria. International Journal for Numerical Methods in Engineering, 52, 979-995.
  • Li, Q., Steven, G., Querin, O., Xie, Y. (2001). Stress based optimization of torsional shafts using an evolutionary procedure. International Journal of Solids and Structures, 38, 5661-5677.
  • Li, Q., Steven, G., Xie, Y. (2001). Thermoelastic topology optimization for problems with varying temperature fields. Journal of Thermal Stresses, 24, 347-366.
Back to Top

For support on your academic profile contact Research Support.