You are here: University of Sydney / Engineering & IT / About us / Our people / Professor Roger Tanner 

Professor Roger Tanner

PN Russell Professor

J07 - Mechanical Engineering Building
The University of Sydney

Telephone +61 2 9351 7153
Fax +61 2 9351 7060

Selected grants

2011

  • Rheology of suspensions with viscoelastic matrices; Tanner R, Fan X; Australian Research Council (ARC)/Discovery Projects (DP).

2010

  • Modelling soft viscoelastic solids; Tanner R; Australian Research Council (ARC)/Discovery Projects (DP).

2007

  • Simulation of the rheology of a suspension of spheroidal particles in a non-Newtonian fluid - Polym; Bertevas E, Tanner R; Polymers CRC Ltd/Project Support.
  • Mullins-type effects in sofit filled viscoelastic solids; Tanner R; Australian Research Council (ARC)/Discovery.

2006

  • Linkage 2005 Round 2 - "Bubble Stabilization and Density Control in Self-Supporting Explosive Emulsi; Warr G, Tanner R, Hawkett B; Dyno Nobel Asia Pacific Limited/Project Support.
  • Project 4.1 Effect of additives on Polymer properties; Tanner R, Wright S; CRC for Polymers/BLO Project.
  • Nano-Rheology and Nano-Tribology: Atomistic Simulation of Boundary Lubrication; Tanner R, Jabbarzadeh-Khoei A; Australian Research Council (ARC)/Discovery Project.
  • Bubble Stabilization and Density Control in Self-Supporting Explosive Emulsions; Warr G, Hawkett B, Tanner R, Gore J, Gore J; Australian Research Council (ARC)/Linkage.

2005

  • Parent: CRC Polymers III (2006) / # 7612 / CRC for Polymers, Manufacturing Technology Sector ( Dev; Fulton G, Crossley P, Hirst T, Dolan N, Cox J, Tanner R.

2004

  • Soft solids rheology and filled elastomeric networks; Pereira G, Tanner R; Australian Research Council (ARC)/Discovery Project.

2003

  • Simulation studies of stick and slip at the solid-liquid boundary; Tanner R, Harrowell P; Australian Research Council (ARC)/Discovery Project.
  • Production of optimal microstructured polymer optical fibre; Barton G, Tanner R, Large M, Poladian L; Australian Research Council (ARC)/Linkage.

2000

  • Thin-film lubrication: molecular dynamics simulation; Atkinson J, Tanner R; Australian Research Council (ARC)/Earlier schemes: Large Grants.
  • Viscoelastic flow instabilities by a transient three-dimensional finite volume method: swirling flow inside a cylinder and torsional flow between two parallel p; Phan-Thien N, Tanner R; Australian Research Council (ARC)/Earlier schemes: Large Grants.

1998

  • Fibre Orientation in a viscoelastic Matrix: Numerical and Constitutive Modelling; Tanner R, Phan-Thien N; Australian Research Council (ARC)/Spirt Grants.
Back to Top

Selected publications

Download citations: PDF RTF Endnote

Books

  • Zheng, R., Tanner, R., Fan, X. (2011). Injection Molding: Integration of Theory and Modeling Methods. Heidelberg Dordrecht London New York: Springer.
  • Fan, X., Phan-Thien, N., Tanner, R. (2008). Numerical Study on Some Rheological Problems of Fibre Suspensions: Numerical Simulations of Fibre Suspensions. Germany: VDM Verlag Dr Muller.

Book Chapters

  • Jabbarzadeh-Khoei, A., Tanner, R. (2006). Molecular Dynamics Simulation and its Application to Nano-Rheology. In Bindings D M and Walters K (Eds.), Rheology Reviews, (pp. 165-216). Aberystwyth UK: British Society of Rheology.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). Effect of branching on the lubricant properties: A molecular dynamics study. In D Dowson, M Priest, G Dalmaz, AA Lubrecht (Eds.), Boundary and Mixed Lubrication: Science and Applications, (pp. 231-240). United States: Elsevier.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2001). Lubrication processes near wall asperities: a molecular dynamics study. In G. Dalmaz, A.A. Lubrecht, D. Dowson and M. Priest (Eds.), Tribology Research: From model experiment to industrial problem, (pp. 779-785). Netherlands: Academic Press Elsevier.

Journals

  • Tanner, R., Qi, F., Uthayakumaran, S., Dai, S. (2013). The effect of pre-test deformation on dough rheology. Rheologica Acta, 52(1, 2013), 33-38.
  • Lee Wo, D., Tanner, R., Fletcher, D. (2012). A numerical treatment of crystallization in tube flow. Polymer Engineering and Science, 52(6), 1356-1366.
  • Dai, S., Tanner, R. (2012). Aspects of elongational testing with bread dough. Journal of Rheology, 56(2), 385-395.
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Newberry, M., Wrigley, C., Copeland, L. (2012). Genotype-based Stability of Dough Quality in Wheat from Different Growth Environments. Journal of Agricultural Science, 4(7), 41-50.
  • Housiadas, K., Tanner, R. (2012). Perturbation solution for the viscoelastic flow around a rigid sphere under pure uniaxial elongation. Journal of Non-Newtonian Fluid Mechanics, 167-168, 75-86.
  • Qi, F., Tanner, R. (2012). Random close packing and relative viscosity of multimodal suspensions. Rheologica Acta, 51(4), 289-302.
  • Housiadas, K., Tanner, R. (2012). The drag of a freely sendimentating sphere in a sheared weakly viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 183–184, 52-56.
  • Tanner, R., Uthayakumaran, S., Qi, F., Dai, S. (2011). A suspension model of the linear viscoelasticity of gluten doughs. Journal of Cereal Science, 54(2), 224-228.
  • Tanner, R., Qi, F., Dai, S. (2011). Bread dough rheology: An improved damage function model. Rheologica Acta, 50(1), 75-86.
  • Dai, S., Qi, F., Tanner, R. (2011). Interpreting shear creep data for bread dough using a damage function model. Applied Rheology (Fliessverhalten steuern), 21(4), 45070-1-45070-6.
  • Housiadas, K., Tanner, R. (2011). Perturbation solution for the viscoelastic 3D flow around a rigid sphere subject to simple shear. Physics of Fluids, 23, 083101-1-083101-20.
  • Qi, F., Tanner, R. (2011). Relative viscosity of bimodal suspensions. Korea - Australia Rheology Journal, 23(2), 105-111.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346.
  • Housiadas, K., Tanner, R. (2011). The angular velocity of a freely rotating sphere in a weakly viscoelastic matrix fluid. Physics of Fluids, 23(5), 051702-1-051702-4.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2011). Thin lubricant films confined between crystalline surfaces: Gold versus mica. Tribology International, 44(6), 711-719.
  • Tanner, R., Qi, F., Housiadas, K. (2010). A differential approach to suspensions with power-law matrices. Journal of Non-Newtonian Fluid Mechanics, 165(23-24), 1677-1681.
  • Tanner, R., Qi, F., Dai, S. (2010). Bread dough rheology: an improved damage function model. Rheologica Acta, 50(1), 75-86.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Flow-Induced Crystallization: Unravelling the Effects of Shear Rate and Strain. Macromolecules, 43(19), 8136-8142.
  • Zheng, R., Tanner, R., Lee Wo, D., Fan, X., Hadinata, C., Costa, F., Kennedy, P., Zhu, P., Edward, G. (2010). Modeling of flow-induced crystallization of colored polypropylene in injection molding. Korea - Australia Rheology Journal, 22(3), 151-162.
  • Fan, X., Zheng, R., Liu, G., Tanner, R., Edward, G. (2010). Modelling Post-molding Warping. International Polymer Processing, 25(1), 47-54.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346.
  • Bertevas, E., Fan, X., Tanner, R. (2010). Simulation of the rheological properties of suspensions of oblate spheroidal particles in a Newtonian fluid. Rheologica Acta, 49(1), 53-73.
  • Fan, X., Tanner, R., Zheng, R. (2010). Smoothed particle hydrodynamics simulation of non-Newtonian moulding flow. Journal of Non-Newtonian Fluid Mechanics, 165, 219-226.
  • Amirkaveei, S., Dai, S., Newberry, M., Qi, F., Shahedi, M., Tanner, R. (2009). A comparison of the rheology of four wheat flour doughs via a damage function model. Applied Rheology (Fliessverhalten steuern), 19(3), 1705-34305-9.
  • Tanner, R., Qi, F., Housiadas, K. (2009). A differential model for the rheological properties of concentrated suspensions with weakly viscoelastic matrices. Rheologica Acta, Online(2), 1-8.
  • Tanner, R., Hadinata, C., Lee Wo, D. (2009). Behaviour of a simple crystallisation model in tube and channel flow. Rheologica Acta, 48(5), 499-507.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2009). Crystallization of alkanes under quiescent and shearing conditions. Journal of Non-Newtonian Fluid Mechanics, 160, 99-21.
  • Housiadas, K., Tanner, R. (2009). On the rheology of a dilute suspension of rigid spheres in a weakly viscoelastic matrix fluid. Journal of Non-Newtonian Fluid Mechanics, 162(1-3), 88-92.
  • Tanner, R., Qi, F. (2009). Stretching, shearing and solidification. Chemical Engineering Science, 64(22), 4576-4579.
  • Tanner, R. (2009). The changing face of rheology. Journal of Non-Newtonian Fluid Mechanics, 157(3), 141-144.
  • Lee Wo, D., Tanner, R. (2009). The impact of blue organic and inorganic pigments on the crystallization and rheological properties of isotactic polypropylene. Rheologica Acta, Online, 1-14.
  • Qi, F., Dai, S., Newberry, M., Love, R., Tanner, R. (2008). A simple approach to predicting dough sheeting thickness. Journal of Cereal Science, 47(3), 489-495.
  • Tanner, R., Qi, F., Dai, S. (2008). Bread dough rheology and recoil I. Rheology. Journal of Non-Newtonian Fluid Mechanics, 148, 33-40.
  • Tanner, R., Dai, S., Qi, F. (2008). Bread dough rheology in biaxial and step-shear deformations. Rheologica Acta, 47(7), 739-749.
  • Tanner, R., Jabbarzadeh-Khoei, A. (2008). Thin-film lubrication nano-rheology via molecular dynamics. Australian Journal of Mechanical Engineering, 5(1), 43-50.
  • Mai-Duy, N., Tanner, R. (2007). A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17(2), 165-186.
  • Mai-Duy, N., Tanner, R. (2007). A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201(1), 30-47.
  • Tanner, R., Dai, S., Qi, F. (2007). Bread dough rheology and recoil 2. Recoil and relaxation. Journal of Non-Newtonian Fluid Mechanics, 143, 107-119.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). Crystal bridges, tetratic order, and elusive equilibria: The role of structure in lubrication films. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 111(39), 11354-11365.
  • Yu, Z., Shao, X., Tanner, R. (2007). Dynamic simulation of shear-induced particle migration in a two-dimensional circular couette device. Chinese Journal of Chemical Engineering, 15(3), 333-338.
  • Tanner, R. (2007). Revisitation of PTT model. Central South University of Technology, 14(Suppl 1), 26-29.
  • Yu, Z., Phan-Thien, N., Tanner, R. (2007). Rotation of a spheroid in a Couette flow at moderate Reynolds numbers. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 76, 026310-1-026310-11.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). The structural origin of the complex rheology in thin dodecane films: Three routes to low friction. Tribology International, 40(10-12), 1574-1586.
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30(10), 809-817.
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A new high-order time-kernel BIEM for the Burgers equation. Computer Modeling in Engineering and Sciences, 16(3), 177-186.
  • Dai, S., Tanner, R. (2006). Anisotropic thermal conductivity in sheared polypropylene. Rheologica Acta, 45(3), 228-238.
  • Tanner, R., Xue, S. (2006). Change of shape of an off-axis hole during optical fibre drawing. Acta Mechanica, 187(1-4), 129-138.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Crystal bridge formation marks the transition to rigidity in a thin lubrication film. Physical Review Letters, 96(20), 206102-1-206102-4.
  • Ausias, G., Fan, X., Tanner, R. (2006). Direct simulation for concentrated fibre suspensions in transient and steady state shear flows. Journal of Non-Newtonian Fluid Mechanics, 135(1), 46-57.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Low friction lubrication between amorphous walls: Unraveling the contributions of surface roughness and in-plane disorder. Journal of Chemical Physics, 125(3), 034703-1-034703-11.
  • Wang, C., Dai, S., Tanner, R. (2006). On the compressibility of bread dough. Korea - Australia Rheology Journal, 18(3), 127-131.
  • Tanner, R. (2006). On the congruence of some network and pom-pom models. Korea - Australia Rheology Journal, 18(1), 9-14.
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860.
  • Dai, S., Qi, F., Tanner, R. (2006). Strain and strain-rate formulation for flow-induced crystallization. Polymer Engineering and Science, 46(5), 659-669.
  • Tanner, R., Qi, F. (2005). A comparison of some models for describing polymer crystallization at low deformation rates. Journal of Non-Newtonian Fluid Mechanics, 127(2-3), 131-141.
  • Tanner, R., Qi, F. (2005). A phenomenological approach to suspensions with viscoelastic matrices. Korea - Australia Rheology Journal, 17, 149-156.
  • Liang, G., Hawkett, B., Tanner, R. (2005). A rheological investigation of the self-assembly and adsorption behavior of a surfactant salt. Journal of Colloid and Interface Science, 292(1), 46-53.
  • Tanner, R. (2005). A theory of die-swell revisited. Journal of Non-Newtonian Fluid Mechanics, 129(2), 85-87.
  • Mai-Duy, N., Tanner, R. (2005). An effective high order interpolation scheme in BIEM for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29(3), 210-223.
  • Mai-Duy, N., Tanner, R. (2005). Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48(12), 1309-1336.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266.
  • Tanner, R., Zdilar, A., Nasseri, S. (2005). Recoil from elongation using general network models. Rheologica Acta, 44(5), 513-520.
  • Mai-Duy, N., Tanner, R. (2005). Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63(11), 1636-1654.
  • Ellero, M., Tanner, R. (2005). SPH simulations of transient viscoelastic flows at low Reynolds number. Journal of Non-Newtonian Fluid Mechanics, 132(1), 61-72.
  • Fan, Y., Yang, H., Tanner, R. (2005). Stress boundary layers in the viscoelastic flow past a cylinder in a channel: limiting solutions. Acta Mechanica Sinica, 21(4), 311-321.
  • Liang, G., Hawkett, B., Tanner, R. (2005). The determination of the isoelectric point from measurements of dispersion viscosity as a function of pH. Journal of Dispersion Science and Technology, 26(4), 469-472.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2005). Very low friction state of a dodecane film confined between mica surfaces. Physical Review Letters, 94(12), 126103-126103-4.
  • Yu, Z., Phan-Thien, N., Tanner, R. (2004). Dynamic Simulation Of Sphere Motion In A Vertical Tube. Journal of Fluid Mechanics, 518, 61-93.
  • Nasseri, S., Bilston, L., Fasheun, B., Tanner, R. (2004). Modelling The Biaxial Elongational Deformation Of Soft Solids. Rheologica Acta, 43(1), 68-79.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). A parallel algorithm for molecular dynamics simulation of branched molecules. Computer Physics Communications, 150(2), 65-84.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). Effect of Molecular Shape on Rheological Properties in Molecular Dynamics Simulation of Star, H, Comb and Linear Polymer Melts. Macromolecules, 36(13), 5020-5031.
  • Tanner, R., Tanner, E. (2003). Heinrich Hencky: a rheological pioneer. Rheologica Acta, 42(1-2), 93-101.
  • Tanner, R. (2003). On the flow of crystallizing polymers. I. Linear regime. Journal of Non-Newtonian Fluid Mechanics, 112(2-3), 251-268.
  • Fan, Y., Dai, S., Tanner, R. (2003). Rheological properties of some thermotropic liquid crystalline polymers. Korea - Australia Rheology Journal, 15(3), 109-115.
  • See, H., Tanner, R. (2003). Shear rate dependence of the normal force of a magnetorheological suspension. Rheologica Acta, 42(1-2), 166-170.
  • Tanner, R., Nasseri, S. (2003). Simple constitutive models for linear and branched polymers. Journal of Non-Newtonian Fluid Mechanics, 116(1), 1-17.
  • Kitoko, V., Keentok, M., Tanner, R. (2003). Study of shear and elongational flow of solidifying polypropylene melt for low deformation rates. Korea - Australia Rheology Journal, 15(2), 63-73.
  • Tanner, R. (2002). A suspension model for low shear rate polymer solidification. Journal of Non-Newtonian Fluid Mechanics, 102(2), 397-408.
  • Carter, J., Poulos, H., Tanner, R. (2002). Biographical memoirs: John Robert Booker 1942-1998. Historical Records of Australian Science, 14(2), 143-168.
  • Tanner, R., Xue, S. (2002). Computing transient flows with high elasticity. Korea - Australia Rheology Journal, 14(4), 143-159.
  • Former, C., Castro, J., Fellows, C., Tanner, R., Gilbert, R. (2002). Effect of Branching and Molecular Weight on the Viscoelastic Properties of Poly(butyl acrylate). Journal of Polymer Science. Part A, Polymer Chemistry, 40(20), 3335-3349.
  • Tanner, R. (2002). Note on the beginnings of sinusoidal testing methods. Korea - Australia Rheology Journal, 14(2), 87-90.
  • Uthayakumaran, S., Beasley, H., Stoddard, F., Keentok, M., Phan-Thien, N., Tanner, R., Bekes, F. (2002). Synergistic and additive effects of three high molecular weight glutenin subunit Loci. I. Effects on wheat dough rheology. Cereal Chemistry, 79(2), 294-300.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). The effect of branching on slip and rheological properties of lubricants in molecular dynamics simulation of Couette shear flow. Tribology International, 35(1), 35-46.
  • Keentok, M., Newberry, M., Gras, P., Bekes, F., Tanner, R. (2002). The rheology of bread dough made from four commercial flours. Rheologica Acta, 41(1-2), 173-179.
  • Xue, S., Phan-Thien, N., Tanner, R. (2002). Upwinding with deferred correction (UPDC): an effective implementation of higher-order convection schemes for implicit finite volume methods. Journal of Non-Newtonian Fluid Mechanics, 108(1-3), 1-24.
  • Fan, Y., Tanner, R., Phan-Thien, N. (2001). Fully developed viscous and viscoelastic flows in curved pipes. Journal of Fluid Mechanics, 440, 327-357.
  • Fan, Y., Phan-Thien, N., Tanner, R. (2001). Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders. Journal of Fluid Mechanics, 431, 65-89.

Conferences

  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Separating the effects of shear rate and strain on flow induced crystallization of polymers by large scale molecular simulations. International Soft Matter Conference 2010, Spain: RSC Publishing.
  • Tanner, R., Dai, S., Qi, F., Newberry, M., Bekes, F. (2009). Basic dough rheology and the Kieffer Test. 5th International Symposium on Food Rheology and Structure, Zurich, Switzerland: ETH Zurich.
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Tanner, R., Lee Wo, D., Zheng, R., Costa, F. (2009). Impact of Colorants on Polypropylene Rheology. Advances in Polymer Science and Technology 1, Linz, Austria: Trauner Verlag.
  • Tanner, R. (2009). Yielding behaviour without an explicit yield stress for soft materials. XXII International Congress of Theoretical and Applied Mechanics, South Australia: ICTAM.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2008). Complex Rheology of Molecularly Thin Films and the Role of Surface and Structure. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Tanner, R. (2008). Towards a simple constitutive model for bread dough. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Jabbarzadeh-Khoei, A., Tanner, R. (2007). Molecular Dynamics Simulation of Crystallization under Quiescent and Shearing Conditions. International Conference on Computational Methods in Science and Engineering 2007 (ICCMSE 2007), Melville, New York United States: American Institute of Physics (AIP).
  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.
  • Tanner, R. (2005). A Revisitation of the PTT Model. 4th Pacific Rim Conference on Rheology (PRCR4), Shanghai, China: Science Press USA.
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Mai-Duy, N., Tanner, R. (2004). An Efficient Bem For Numerical Solution Of The Biharmonic Boundary Value Problem. The 2004 International Conference on Computational Experimental Engineering and Sciences (ICCES04). Tech Science Press.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Mai-Duy, N., Tanner, R. (2004). Numerical Analysis Of Corrugated Tube Flow Using RBFNs. The XIVth International Congress on Rheology (ICR 2004). The Korean Society of Rheology.
  • Tanner, R. (2001). A century of stress and strain in rheology. 3rd Pacific Rim Conference on Rheolgoy, : Ads & Adea.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical investigation on three-dimensional, time-dependent Newtonian rotational flow between two rotating coaxial disks with a finite domain. 1st Asian-Pacific Congress on Computational Mechanics. UNSW Australian Defence Force Academy.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical simulations on torsional flow of viscoelastic fluid in parallel plate rheometer with a finite radial domain. 3rd Pacific Rim Conference on Rheolgoy, : Ads & Adea.
  • Uthayakumaran, S., Newberry, M., Tanner, R., Phan-Thien, N. (2001). Gluten and starch: builders of dough rheology. Cereals 2000, : UNSW Australian Defence Force Academy.
  • Uthayakumaran, S., Hubraq, T., Keentok, M., Tanner, R., Daqiq, L., Beasley, H., Partridge, S., Gras, P., Bekes, F. (2001). Role of HMW-GS in defining the basic and applied rheological parameters and end-use quality of wheat flour dough. Cereas l2000, : UNSW Australian Defence Force Academy.
  • Keentok, M., Newberry, M., Tanner, R., Gras, P., Bekes, F. (2001). The rheology of bread dough made from commercial flours. Cereals 2000, : UNSW Australian Defence Force Academy.

2013

  • Tanner, R., Qi, F., Uthayakumaran, S., Dai, S. (2013). The effect of pre-test deformation on dough rheology. Rheologica Acta, 52(1, 2013), 33-38.

2012

  • Lee Wo, D., Tanner, R., Fletcher, D. (2012). A numerical treatment of crystallization in tube flow. Polymer Engineering and Science, 52(6), 1356-1366.
  • Dai, S., Tanner, R. (2012). Aspects of elongational testing with bread dough. Journal of Rheology, 56(2), 385-395.
  • Uthayakumaran, S., Tanner, R., Dai, S., Qi, F., Newberry, M., Wrigley, C., Copeland, L. (2012). Genotype-based Stability of Dough Quality in Wheat from Different Growth Environments. Journal of Agricultural Science, 4(7), 41-50.
  • Housiadas, K., Tanner, R. (2012). Perturbation solution for the viscoelastic flow around a rigid sphere under pure uniaxial elongation. Journal of Non-Newtonian Fluid Mechanics, 167-168, 75-86.
  • Qi, F., Tanner, R. (2012). Random close packing and relative viscosity of multimodal suspensions. Rheologica Acta, 51(4), 289-302.
  • Housiadas, K., Tanner, R. (2012). The drag of a freely sendimentating sphere in a sheared weakly viscoelastic fluid. Journal of Non-Newtonian Fluid Mechanics, 183–184, 52-56.

2011

  • Tanner, R., Uthayakumaran, S., Qi, F., Dai, S. (2011). A suspension model of the linear viscoelasticity of gluten doughs. Journal of Cereal Science, 54(2), 224-228.
  • Tanner, R., Qi, F., Dai, S. (2011). Bread dough rheology: An improved damage function model. Rheologica Acta, 50(1), 75-86.
  • Zheng, R., Tanner, R., Fan, X. (2011). Injection Molding: Integration of Theory and Modeling Methods. Heidelberg Dordrecht London New York: Springer.
  • Dai, S., Qi, F., Tanner, R. (2011). Interpreting shear creep data for bread dough using a damage function model. Applied Rheology (Fliessverhalten steuern), 21(4), 45070-1-45070-6.
  • Housiadas, K., Tanner, R. (2011). Perturbation solution for the viscoelastic 3D flow around a rigid sphere subject to simple shear. Physics of Fluids, 23, 083101-1-083101-20.
  • Qi, F., Tanner, R. (2011). Relative viscosity of bimodal suspensions. Korea - Australia Rheology Journal, 23(2), 105-111.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2011). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346.
  • Housiadas, K., Tanner, R. (2011). The angular velocity of a freely rotating sphere in a weakly viscoelastic matrix fluid. Physics of Fluids, 23(5), 051702-1-051702-4.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2011). Thin lubricant films confined between crystalline surfaces: Gold versus mica. Tribology International, 44(6), 711-719.

2010

  • Tanner, R., Qi, F., Housiadas, K. (2010). A differential approach to suspensions with power-law matrices. Journal of Non-Newtonian Fluid Mechanics, 165(23-24), 1677-1681.
  • Tanner, R., Qi, F., Dai, S. (2010). Bread dough rheology: an improved damage function model. Rheologica Acta, 50(1), 75-86.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Flow-Induced Crystallization: Unravelling the Effects of Shear Rate and Strain. Macromolecules, 43(19), 8136-8142.
  • Zheng, R., Tanner, R., Lee Wo, D., Fan, X., Hadinata, C., Costa, F., Kennedy, P., Zhu, P., Edward, G. (2010). Modeling of flow-induced crystallization of colored polypropylene in injection molding. Korea - Australia Rheology Journal, 22(3), 151-162.
  • Fan, X., Zheng, R., Liu, G., Tanner, R., Edward, G. (2010). Modelling Post-molding Warping. International Polymer Processing, 25(1), 47-54.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2010). Separating the effects of shear rate and strain on flow induced crystallization of polymers by large scale molecular simulations. International Soft Matter Conference 2010, Spain: RSC Publishing.
  • Chang, L., Friedrich, K., Schlarb, A., Tanner, R., Ye, L. (2010). Shear-thickening behaviour of concentrated polymer dispersions under steady and oscillatory shear. Journal of Materials Science, 46(2), 339-346.
  • Bertevas, E., Fan, X., Tanner, R. (2010). Simulation of the rheological properties of suspensions of oblate spheroidal particles in a Newtonian fluid. Rheologica Acta, 49(1), 53-73.
  • Fan, X., Tanner, R., Zheng, R. (2010). Smoothed particle hydrodynamics simulation of non-Newtonian moulding flow. Journal of Non-Newtonian Fluid Mechanics, 165, 219-226.

2009

  • Amirkaveei, S., Dai, S., Newberry, M., Qi, F., Shahedi, M., Tanner, R. (2009). A comparison of the rheology of four wheat flour doughs via a damage function model. Applied Rheology (Fliessverhalten steuern), 19(3), 1705-34305-9.
  • Tanner, R., Qi, F., Housiadas, K. (2009). A differential model for the rheological properties of concentrated suspensions with weakly viscoelastic matrices. Rheologica Acta, Online(2), 1-8.
  • Tanner, R., Dai, S., Qi, F., Newberry, M., Bekes, F. (2009). Basic dough rheology and the Kieffer Test. 5th International Symposium on Food Rheology and Structure, Zurich, Switzerland: ETH Zurich.
  • Tanner, R., Hadinata, C., Lee Wo, D. (2009). Behaviour of a simple crystallisation model in tube and channel flow. Rheologica Acta, 48(5), 499-507.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2009). Crystallization of alkanes under quiescent and shearing conditions. Journal of Non-Newtonian Fluid Mechanics, 160, 99-21.
  • Xue, S., Barton, G., Tanner, R. (2009). Heat Transfer within a Furnace for Drawing Microstructured Optical Fibres. 18th International Conference on Plastic Optical Fibers (POF 2009), CD-rom: University of Sydney.
  • Tanner, R., Lee Wo, D., Zheng, R., Costa, F. (2009). Impact of Colorants on Polypropylene Rheology. Advances in Polymer Science and Technology 1, Linz, Austria: Trauner Verlag.
  • Housiadas, K., Tanner, R. (2009). On the rheology of a dilute suspension of rigid spheres in a weakly viscoelastic matrix fluid. Journal of Non-Newtonian Fluid Mechanics, 162(1-3), 88-92.
  • Tanner, R., Qi, F. (2009). Stretching, shearing and solidification. Chemical Engineering Science, 64(22), 4576-4579.
  • Tanner, R. (2009). The changing face of rheology. Journal of Non-Newtonian Fluid Mechanics, 157(3), 141-144.
  • Lee Wo, D., Tanner, R. (2009). The impact of blue organic and inorganic pigments on the crystallization and rheological properties of isotactic polypropylene. Rheologica Acta, Online, 1-14.
  • Tanner, R. (2009). Yielding behaviour without an explicit yield stress for soft materials. XXII International Congress of Theoretical and Applied Mechanics, South Australia: ICTAM.

2008

  • Qi, F., Dai, S., Newberry, M., Love, R., Tanner, R. (2008). A simple approach to predicting dough sheeting thickness. Journal of Cereal Science, 47(3), 489-495.
  • Tanner, R., Qi, F., Dai, S. (2008). Bread dough rheology and recoil I. Rheology. Journal of Non-Newtonian Fluid Mechanics, 148, 33-40.
  • Tanner, R., Dai, S., Qi, F. (2008). Bread dough rheology in biaxial and step-shear deformations. Rheologica Acta, 47(7), 739-749.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2008). Complex Rheology of Molecularly Thin Films and the Role of Surface and Structure. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).
  • Fan, X., Phan-Thien, N., Tanner, R. (2008). Numerical Study on Some Rheological Problems of Fibre Suspensions: Numerical Simulations of Fibre Suspensions. Germany: VDM Verlag Dr Muller.
  • Tanner, R., Jabbarzadeh-Khoei, A. (2008). Thin-film lubrication nano-rheology via molecular dynamics. Australian Journal of Mechanical Engineering, 5(1), 43-50.
  • Tanner, R. (2008). Towards a simple constitutive model for bread dough. The XVth International Congress On Rheology- The Society of Rheology 80th Annual Meeting, United States of America: American Institute of Physics (AIP).

2007

  • Mai-Duy, N., Tanner, R. (2007). A collocation method based on one-dimensional RBF interpolation scheme for solving PDEs. International Journal of Numerical Methods for Heat and Fluid Flow, 17(2), 165-186.
  • Mai-Duy, N., Tanner, R. (2007). A spectral collocation method based on integrated Chebyshev polynomials for two-dimensional biharmonic boundary-value problems. Journal of Computational and Applied Mathematics, 201(1), 30-47.
  • Tanner, R., Dai, S., Qi, F. (2007). Bread dough rheology and recoil 2. Recoil and relaxation. Journal of Non-Newtonian Fluid Mechanics, 143, 107-119.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). Crystal bridges, tetratic order, and elusive equilibria: The role of structure in lubrication films. The Journal of Physical Chemistry Part B: Condensed Matter, Materials, Surfaces, Interfaces and Biophysical, 111(39), 11354-11365.
  • Yu, Z., Shao, X., Tanner, R. (2007). Dynamic simulation of shear-induced particle migration in a two-dimensional circular couette device. Chinese Journal of Chemical Engineering, 15(3), 333-338.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2007). Molecular Dynamics Simulation of Crystallization under Quiescent and Shearing Conditions. International Conference on Computational Methods in Science and Engineering 2007 (ICCMSE 2007), Melville, New York United States: American Institute of Physics (AIP).
  • Tanner, R. (2007). Revisitation of PTT model. Central South University of Technology, 14(Suppl 1), 26-29.
  • Yu, Z., Phan-Thien, N., Tanner, R. (2007). Rotation of a spheroid in a Couette flow at moderate Reynolds numbers. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), 76, 026310-1-026310-11.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2007). The structural origin of the complex rheology in thin dodecane films: Three routes to low friction. Tribology International, 40(10-12), 1574-1586.

2006

  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A domain-type boundary-integral-equation method for two-dimensional biharmonic Dirichlet problem. Engineering Analysis with Boundary Elements, 30(10), 809-817.
  • Mai-Duy, N., Tran-Cong, T., Tanner, R. (2006). A new high-order time-kernel BIEM for the Burgers equation. Computer Modeling in Engineering and Sciences, 16(3), 177-186.
  • Large, M., Van Eijkelenborg, M., Lwin, R., Barton, G., Poladian, L., Tanner, R., Xue, S. (2006). An Overview of mPOF Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Dai, S., Tanner, R. (2006). Anisotropic thermal conductivity in sheared polypropylene. Rheologica Acta, 45(3), 228-238.
  • Tanner, R., Xue, S. (2006). Change of shape of an off-axis hole during optical fibre drawing. Acta Mechanica, 187(1-4), 129-138.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Crystal bridge formation marks the transition to rigidity in a thin lubrication film. Physical Review Letters, 96(20), 206102-1-206102-4.
  • Ausias, G., Fan, X., Tanner, R. (2006). Direct simulation for concentrated fibre suspensions in transient and steady state shear flows. Journal of Non-Newtonian Fluid Mechanics, 135(1), 46-57.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Experimental Analysis of Hole Deformation During Microstructured Polymer Optical Fibre Fabrication. WorkPof 2006 - International Workshop on Polymer Optical Fibres and International Workshop on Mirco-Structured Polymer Optical, Rio de Janeiro, Brazil: Inclui bibliografia.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2006). Low friction lubrication between amorphous walls: Unraveling the contributions of surface roughness and in-plane disorder. Journal of Chemical Physics, 125(3), 034703-1-034703-11.
  • Jabbarzadeh-Khoei, A., Tanner, R. (2006). Molecular Dynamics Simulation and its Application to Nano-Rheology. In Bindings D M and Walters K (Eds.), Rheology Reviews, (pp. 165-216). Aberystwyth UK: British Society of Rheology.
  • Wang, C., Dai, S., Tanner, R. (2006). On the compressibility of bread dough. Korea - Australia Rheology Journal, 18(3), 127-131.
  • Tanner, R. (2006). On the congruence of some network and pom-pom models. Korea - Australia Rheology Journal, 18(1), 9-14.
  • Xue, S., Large, M., Barton, G., Tanner, R., Poladian, L., Lwin, R. (2006). Role of Material Properties and Drawing Conditions in the Fabrication of Microstructured Optical Fibers. Journal of Lightwave Technology, 24(2), 853-860.
  • Dai, S., Qi, F., Tanner, R. (2006). Strain and strain-rate formulation for flow-induced crystallization. Polymer Engineering and Science, 46(5), 659-669.
  • Lwin, R., Barton, G., Large, M., Poladian, L., Tanner, R., Xue, S. (2006). Validating the Rheological Changes during the Fibre Drawing of Microstructured Optical Fibres. 32nd European Conference on Optical Communication (ECOC 2006), USA: (IEEE) Institute of Electrical and Electronics Engineers.

2005

  • Tanner, R., Qi, F. (2005). A comparison of some models for describing polymer crystallization at low deformation rates. Journal of Non-Newtonian Fluid Mechanics, 127(2-3), 131-141.
  • Tanner, R., Qi, F. (2005). A phenomenological approach to suspensions with viscoelastic matrices. Korea - Australia Rheology Journal, 17, 149-156.
  • Tanner, R. (2005). A Revisitation of the PTT Model. 4th Pacific Rim Conference on Rheology (PRCR4), Shanghai, China: Science Press USA.
  • Liang, G., Hawkett, B., Tanner, R. (2005). A rheological investigation of the self-assembly and adsorption behavior of a surfactant salt. Journal of Colloid and Interface Science, 292(1), 46-53.
  • Tanner, R. (2005). A theory of die-swell revisited. Journal of Non-Newtonian Fluid Mechanics, 129(2), 85-87.
  • Mai-Duy, N., Tanner, R. (2005). An effective high order interpolation scheme in BIEM for biharmonic boundary value problems. Engineering Analysis with Boundary Elements, 29(3), 210-223.
  • Mai-Duy, N., Tanner, R. (2005). Computing non-Newtonian fluid flow with radial basis function networks. International Journal for Numerical Methods in Fluids, 48(12), 1309-1336.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part I: Problem formulation and numerical modeling of transient draw process. Journal of Lightwave Technology, 23(7), 2245-2254.
  • Xue, S., Tanner, R., Barton, G., Lwin, R., Large, M., Poladian, L. (2005). Fabrication of microstructured optical fibers - Part II: Numerical modeling of steady-state draw process. Journal of Lightwave Technology, 23(7), 2255-2266.
  • Xue, S., Large, M., Barton, G., Tanner, R., Lwin, R., Poladian, L. (2005). Hole Deformation Behaviour in Drawing Microstructured Optical Fibres. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Barton, G., Keawfanapadol, T., Large, M., Lwin, R., Poladian, L., Tanner, R., Xue, S. (2005). Microstructured polymer optical fibres - from concept to reality. 7th World Congress of Chemical Engineering, Glasgow, Scotland: IChemE.
  • Tanner, R., Zdilar, A., Nasseri, S. (2005). Recoil from elongation using general network models. Rheologica Acta, 44(5), 513-520.
  • Mai-Duy, N., Tanner, R. (2005). Solving high-order partial differential equations with indirect radial basis function networks. International Journal for Numerical Methods in Engineering, 63(11), 1636-1654.
  • Ellero, M., Tanner, R. (2005). SPH simulations of transient viscoelastic flows at low Reynolds number. Journal of Non-Newtonian Fluid Mechanics, 132(1), 61-72.
  • Fan, Y., Yang, H., Tanner, R. (2005). Stress boundary layers in the viscoelastic flow past a cylinder in a channel: limiting solutions. Acta Mechanica Sinica, 21(4), 311-321.
  • Lwin, R., Barton, G., Keawfanapadol, T., Large, M., Poladian, L., Tanner, R., Van Eijkelenborg, M., Xue, S. (2005). Suspended Core Microstructured Polymer Optical Fibre: Connecting to Reality. BGPP/ ACOFT 2005 : OSA Topical Meeting on Bragg Gratings, Poling & Photosensitivity (BGPP) / 30th Australian Conference on Optical Fibre Technology (ACOFT) 2005, Sydney: Tour Hosts Pty Ltd.
  • Liang, G., Hawkett, B., Tanner, R. (2005). The determination of the isoelectric point from measurements of dispersion viscosity as a function of pH. Journal of Dispersion Science and Technology, 26(4), 469-472.
  • Jabbarzadeh-Khoei, A., Harrowell, P., Tanner, R. (2005). Very low friction state of a dodecane film confined between mica surfaces. Physical Review Letters, 94(12), 126103-126103-4.

2004

  • Mai-Duy, N., Tanner, R. (2004). An Efficient Bem For Numerical Solution Of The Biharmonic Boundary Value Problem. The 2004 International Conference on Computational Experimental Engineering and Sciences (ICCES04). Tech Science Press.
  • Xue, S., Barton, G., Large, M., Lwin, R., Poladian, L., Tanner, R. (2004). Analysis of Hole Deformation in Drawing Microstructured Optical Fibres. 13th International Plastic Optical Fibres Conference POF 2004, Switzerland: Basel: AKM Congress Service.
  • Yu, Z., Phan-Thien, N., Tanner, R. (2004). Dynamic Simulation Of Sphere Motion In A Vertical Tube. Journal of Fluid Mechanics, 518, 61-93.
  • Large, M., Barton, G., Lwin, R., Poladian, L., Tanner, R., Xue, S., Yu, H. (2004). Hole Deformation in Microstructured Optical Fibres. ECOC 2004 - 30th European Conference on Optical Communications, Stockholm, Sweden: (IEEE) Institute of Electrical and Electronics Engineers.
  • Poladian, L., Barton, G., Large, M., Lwin, R., Pok, W., Tanner, R., Van Eijkelenborg, M., Xue, S., Yu, H. (2004). Microstructured Polymer Optical Fibres: Impact of Imperfections in Design and Manufacture. OECC/COIN 2004 - Optoelectronics and Communications Conference and Conference on Optical Internet.
  • Nasseri, S., Bilston, L., Fasheun, B., Tanner, R. (2004). Modelling The Biaxial Elongational Deformation Of Soft Solids. Rheologica Acta, 43(1), 68-79.
  • Mai-Duy, N., Tanner, R. (2004). Numerical Analysis Of Corrugated Tube Flow Using RBFNs. The XIVth International Congress on Rheology (ICR 2004). The Korean Society of Rheology.

2003

  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). A parallel algorithm for molecular dynamics simulation of branched molecules. Computer Physics Communications, 150(2), 65-84.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2003). Effect of Molecular Shape on Rheological Properties in Molecular Dynamics Simulation of Star, H, Comb and Linear Polymer Melts. Macromolecules, 36(13), 5020-5031.
  • Tanner, R., Tanner, E. (2003). Heinrich Hencky: a rheological pioneer. Rheologica Acta, 42(1-2), 93-101.
  • Tanner, R. (2003). On the flow of crystallizing polymers. I. Linear regime. Journal of Non-Newtonian Fluid Mechanics, 112(2-3), 251-268.
  • Fan, Y., Dai, S., Tanner, R. (2003). Rheological properties of some thermotropic liquid crystalline polymers. Korea - Australia Rheology Journal, 15(3), 109-115.
  • See, H., Tanner, R. (2003). Shear rate dependence of the normal force of a magnetorheological suspension. Rheologica Acta, 42(1-2), 166-170.
  • Tanner, R., Nasseri, S. (2003). Simple constitutive models for linear and branched polymers. Journal of Non-Newtonian Fluid Mechanics, 116(1), 1-17.
  • Kitoko, V., Keentok, M., Tanner, R. (2003). Study of shear and elongational flow of solidifying polypropylene melt for low deformation rates. Korea - Australia Rheology Journal, 15(2), 63-73.

2002

  • Tanner, R. (2002). A suspension model for low shear rate polymer solidification. Journal of Non-Newtonian Fluid Mechanics, 102(2), 397-408.
  • Carter, J., Poulos, H., Tanner, R. (2002). Biographical memoirs: John Robert Booker 1942-1998. Historical Records of Australian Science, 14(2), 143-168.
  • Tanner, R., Xue, S. (2002). Computing transient flows with high elasticity. Korea - Australia Rheology Journal, 14(4), 143-159.
  • Former, C., Castro, J., Fellows, C., Tanner, R., Gilbert, R. (2002). Effect of Branching and Molecular Weight on the Viscoelastic Properties of Poly(butyl acrylate). Journal of Polymer Science. Part A, Polymer Chemistry, 40(20), 3335-3349.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). Effect of branching on the lubricant properties: A molecular dynamics study. In D Dowson, M Priest, G Dalmaz, AA Lubrecht (Eds.), Boundary and Mixed Lubrication: Science and Applications, (pp. 231-240). United States: Elsevier.
  • Tanner, R. (2002). Note on the beginnings of sinusoidal testing methods. Korea - Australia Rheology Journal, 14(2), 87-90.
  • Uthayakumaran, S., Beasley, H., Stoddard, F., Keentok, M., Phan-Thien, N., Tanner, R., Bekes, F. (2002). Synergistic and additive effects of three high molecular weight glutenin subunit Loci. I. Effects on wheat dough rheology. Cereal Chemistry, 79(2), 294-300.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2002). The effect of branching on slip and rheological properties of lubricants in molecular dynamics simulation of Couette shear flow. Tribology International, 35(1), 35-46.
  • Keentok, M., Newberry, M., Gras, P., Bekes, F., Tanner, R. (2002). The rheology of bread dough made from four commercial flours. Rheologica Acta, 41(1-2), 173-179.
  • Xue, S., Phan-Thien, N., Tanner, R. (2002). Upwinding with deferred correction (UPDC): an effective implementation of higher-order convection schemes for implicit finite volume methods. Journal of Non-Newtonian Fluid Mechanics, 108(1-3), 1-24.

2001

  • Tanner, R. (2001). A century of stress and strain in rheology. 3rd Pacific Rim Conference on Rheolgoy, : Ads & Adea.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical investigation on three-dimensional, time-dependent Newtonian rotational flow between two rotating coaxial disks with a finite domain. 1st Asian-Pacific Congress on Computational Mechanics. UNSW Australian Defence Force Academy.
  • Xue, S., Tanner, R., Phan-Thien, N. (2001). Direct numerical simulations on torsional flow of viscoelastic fluid in parallel plate rheometer with a finite radial domain. 3rd Pacific Rim Conference on Rheolgoy, : Ads & Adea.
  • Fan, Y., Tanner, R., Phan-Thien, N. (2001). Fully developed viscous and viscoelastic flows in curved pipes. Journal of Fluid Mechanics, 440, 327-357.
  • Uthayakumaran, S., Newberry, M., Tanner, R., Phan-Thien, N. (2001). Gluten and starch: builders of dough rheology. Cereals 2000, : UNSW Australian Defence Force Academy.
  • Jabbarzadeh-Khoei, A., Atkinson, J., Tanner, R. (2001). Lubrication processes near wall asperities: a molecular dynamics study. In G. Dalmaz, A.A. Lubrecht, D. Dowson and M. Priest (Eds.), Tribology Research: From model experiment to industrial problem, (pp. 779-785). Netherlands: Academic Press Elsevier.
  • Uthayakumaran, S., Hubraq, T., Keentok, M., Tanner, R., Daqiq, L., Beasley, H., Partridge, S., Gras, P., Bekes, F. (2001). Role of HMW-GS in defining the basic and applied rheological parameters and end-use quality of wheat flour dough. Cereas l2000, : UNSW Australian Defence Force Academy.
  • Fan, Y., Phan-Thien, N., Tanner, R. (2001). Tangential flow and advective mixing of viscoplastic fluids between eccentric cylinders. Journal of Fluid Mechanics, 431, 65-89.
  • Keentok, M., Newberry, M., Tanner, R., Gras, P., Bekes, F. (2001). The rheology of bread dough made from commercial flours. Cereals 2000, : UNSW Australian Defence Force Academy.
Back to Top

For support on your academic profile contact Research Support.