University of Sydney Handbooks - 2013 Archive

Download full 2013 archive Page archived at: Mon, 20 May 2013 12:11:37 +1000

School of Chemical and Biomolecular Engineering

Master of Professional Engineering

For a standard enrolment plan for Master of Professional Engineering (Chemical and Biomolecular) visit http://cusp.sydney.edu.au/students/view-degree-page/name/MPE(CBE)

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Master of Professional Engineering (Chemical and Biomolecular)

To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 144 credit points, including core and elective units of study as listed below.
A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director and are equivalent to units of study offered in the Master of Professional Engineering.

Core units

Year One

Year One covers foundation units only. Students with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation are exempt from these foundation units.

Year One - Semester One

CHNG5701
Found of Conservation & Transport Proc
6    A Calculus, computations (Matlab, Excel), Mass and Energy Balances
N CHNG2801
Semester 1
CHNG5702
Found of Applied Maths for Chem Eng
6    A Enrolment in this unit of study assumes that all core science and engineering UoS in first-year (or their equivalent) have been successfully completed.
Semester 1
CHNG5703
Found of Energy and Fluid Systems
6    A Ability to understand basic principles of physical chemistry, physics and mechanics. Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature. Ability to write coherent reports and essays based on qualitative and quantitative information
N CHNG2803
Semester 1
ENGG5011
Foundation Engineering Studies A
6      Semester 1
Semester 2

Year One - Semester Two

CHNG5704
Found: Chem & Biological Syst Behaviour
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL.
N CHNG2804
Semester 2
CHNG5706
Materials Purification & Recovery (Fund)
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems. Ability to understand basic principles of physical chemistry, physics and mechanics. Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature. Ability to write coherent reports and essays based on qualitative and quantitative information
Semester 2
CHNG5707
Material & Energy Transformation (Fund)
6      Semester 2
CHNG5804
Found of Biochemical Eng
6    N CHNG3804
Semester 2

Year Two - Semester One

CHNG5801
Foundations of Process Design
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature Ability to write coherent reports and essays based on qualitative information
P CHNG5701, CHNG5702, CHNG5704, CHNG5705
N CHNG3801
Semester 1
CHNG5802
Found: Operation & Improving Ind Systems
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature Ability to write coherent reports and essays based on qualitative information
P CHNG5701, CHNG5702, CHNG5704 and CHNG5705
N CHNG3802
Semester 1
CHNG5803
Found of Chem & Biological Processes
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature Ability to write coherent reports and essays based on qualitative and quantitative information
P CHNG5701, CHNG5702, CHNG5704 and CHNG5705
N CHNG3803
Semester 1
ENGG5202
Sustainable Design, Eng and Mgt
6    A General knowledge in science and calculus.
Semester 1

Year Two - Semester Two

CHNG5805
Foundation of Prod Formulation & Design
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature Ability to write coherent reports and essays based on qualitative information
P CHNG5701, CHNG5702, CHNG5704 and CHNG5705
N CHNG3805
Semester 2
CHNG5806
Found of Manag of Industrial Syst
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve real chemical engineering problems Ability to understand basic principles of physical chemistry, physics and mechanics Ability to use mathematics of calculus (including vector calculus) and linear algebra, and carry out computations with MATLAB and MS EXCEL. Ability to read widely outside of the technical literature, and to synthesise arguments based on such literature Ability to write coherent reports and essays based on qualitative information
P CHNG5701, CHNG5702, CHNG5704 and CHNG5705.
N CHNG3806
Semester 2
Select 12 credit points from Specialist electives/Management electives.
Candidates must complete 24 credit points from Specialisation Electives and 6 credit points from Management Electives across Year Two and Year Three.

Year Three - Semester One

CHNG5112
Found of Chemical Eng Design A
6    A Enrolment in this unit of study assumes that all core chemical engineering UoS in second and third years, or their equivalent, have been successfully completed.
P CHNG5801, CHNG5802, CHNG5805, CHNG5806

Note: Department permission required for enrolmentin the following sessions:Semester 2,

Semester 1
Semester 2
ENGG5217
Practical Experience
   P Students will have completed a minimum of 48cp towards the MPE.
Semester 1
Semester 2
CHNG5020
Capstone Project A
6    P 48 credits from MPE degree program
N ENGG5222, ENGG5223

Note: Department permission required for enrolment

Semester 1
Semester 2
Candidates achieving an average mark of 70% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Extended Capstone Project. See Project units.
Candidates achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway and may replace CHNG5020 and 6CP of recommended electives with CHNG5222 Dissertation A.
Select 12 credit points from Specialist electives/Management electives.
Candidates must complete 24 credit points from Specialisation Electives and 6 credit points from Management Electives across Year Two and Year Three.

Year Three - Semester Two

CHNG5116
Found of Chemical Eng Design B
6    A Enrolment in this unit of study assumes that all core chemical engineering UoS in second and third years, or their equivalent, have been successfully completed.
P CHNG5112 Chemical Engineering Design A

Note: Department permission required for enrolmentin the following sessions:Semester 1,

Semester 1
Semester 2
CHNG5021
Capstone Project B
6    C CHNG5020
N ENGG5222, ENGG5223, ENGG5218, ENGG5219

Note: Department permission required for enrolment

Semester 1
Semester 2
Candidates achieving an average mark of 70% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Extended Capstone Project. See Project units.
Candidates achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway and may replace CHNG5021 and 6cp of recommended electives with CHNG5223 Dissertation B.
Select 12 credit points from Specialist electives/Management electives.
Candidates must complete 24 credit points from Specialisation Electives and 6 credit points from Management Electives across Year Two and Year Three.

Specialist elective units

Candidates must complete 24 credit points from the following Chemical & Biomolecular Specialist elective units.
CHNG5001
Process Systems Engineering
6    A Mathematics, physics and modeling. Assumed knowledge at the bachelor of Science level.


This unit of study is for Masters students and can be selected as an elective by 4th year students.
Semester 2
CHNG5003
Green Engineering
6    A Enrolment in this unit of study assumes that all (six) core chemical engineering UoS in third year or their equivalent have been successfully completed.
Semester 2
CHNG5004
Particles and Surfaces
6    A Enrolment in this unit of study assumes that all (six) core chemical engineering UoS in third year or their equivalent have been successfully completed.
Semester 1
CHNG5005
Wastewater Eng - Systems and Practice
6    A Ability to conduct mass and energy balances, and the integration of these concepts to solve 'real' chemical engineering problems. Ability to understand basic principles of physical chemistry, physics and mechanics. Ability to use basic calculus and linear algebra, and carry out such computations using Matlab and MS Excel. Ability to read widely outside of the technical literature and to synthesise arguments based on such literature. Ability to write coherent reports and essays based on information from diverse sources.
P CHNG5801
Semester 2
CHNG5008
Chemical & Biomolecular Engineering Adv
6    P CHNG5801

Note: Department permission required for enrolment

Semester 2
CHNG5601
Membrane Science
6      Semester 1
CHNG5602
Cellular Biophysics
6      Semester 1
CHNG5603
Analysis, Modelling, Control: BioPhy Sys
6    A It is assumed that students have a general knowledge of: MATH 1001 Differential Calculus MATH 1003 Integral Calculus and Modeling
Semester 1
CHNG5604
Membrane Science Laboratory
6      Semester 2
CHNG5605
Bio-Products: Laboratory to Marketplace
6      Semester 2

Management elective units

Candidates must complete 6 credit points from the following Management elective units.
ENGG5203
Quality Engineering and Management
6      Semester 2
ENGG5205
Professional Practice in PM
6    A Basic engineering or science knowledge. At least 2-3 years of work experience preferred.
Semester 1
Semester 2
ENGG5214
Management of Technology
6    A As graduates, they will have a soundly based technical knowledge in engineering or a related area, life skills and work experience.
Semester 2
ENGG5215
International Eng Strategy & Operations
6    A As graduates, they will have a soundly based technical knowledge in engineering or a related area, life skills and work experience.
Semester 2
ENGG5216
Management of Engineering Innovation
6    A As graduates, they will have a soundly based technical knowledge in engineering or a related area, life skills and work experience.
Semester 2

Project units

Candidates achieving an average mark of 70% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Extended Capstone Project.
Extended Capstone Project candidates take Capstone Project units CHNG5020 and CHNG5022 (total 18 cp) in place of Capstone Project CHNG5021 and 6 cp of elective units.
CHNG5020
Capstone Project A
6    P 48 credits from MPE degree program
N ENGG5222, ENGG5223

Note: Department permission required for enrolment

Semester 1
Semester 2
CHNG5021
Capstone Project B
6    C CHNG5020
N ENGG5222, ENGG5223, ENGG5218, ENGG5219

Note: Department permission required for enrolment

Semester 1
Semester 2
CHNG5022
Capstone Project B Extended
12    P Entry to ME with AQF Level 8 Degree or 42 credit points with WAM > 70; WAM >70 over 48 credit points of units of study in the Year Two MPE table.
C CHNG5020

Note: Department permission required for enrolment

Semester 1
Semester 2

Research pathway

Candidates achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway.
Research pathway candidates take Dissertation units CHNG5222 and CHNG5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
CHNG5222
Dissertation A
12   
Note: Department permission required for enrolment

Semester 1
Semester 2
CHNG5223
Dissertation B
12    C CHNG5222

Note: Department permission required for enrolment

Semester 1
Semester 2

MIPP pathway (Major Industrial Project Placement)

MIPP pathway candidates take CHNG5205 Major Industrial Project Placement (24 credit points) in place of the Engineering Project units (12 credit points) plus CHNG5112 Foundation of Chemical Engineering Design A and one of the electives from the Specialist Units of Study.
CHNG5205
Major Industrial Placement Project
24    P Passed at least 48 credit points in Master of Professional Engineering.
N CHNG5112, ENGG5219, ENGG5220, ENGG5221, CHNG5801

Note: Department permission required for enrolment
Enrollment by permission only. The students enrolled in this subject should complete the first year Master of Professional Engineering with specialisation in Chemical and Biomolecular Engineering and a minimum credit average. The candidate will be selected by interview and at the discretion of the Head of School.
Semester 1