University of Sydney Handbooks - 2017 Archive

Download full 2017 archive Page archived at: Mon, 28 Aug 2017 11:21:58 +1000

Mechanical Engineering unit of study descriptions

MECH – Mechanical Engineering unit of study descriptions

MECH1400 Mechanical Construction

Credit points: 6 Session: Semester 2 Classes: Lectures, Laboratories Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Learn about selected historical events, research methods, analysis techniques, application of theory and analysis to real machinery, use of machine and hand tools.
This is a project based subject where the students will design, build and test their own designs. Historical developments in the area of the project are researched and applied and research into relevant fields is required to fully understand and analyse the project problem.
The unit ties in with workshop component of MECH1560. Skills developed become relevant in MECH2400 Mechanical Design 1
MECH1560 Introduction to Mechanical Engineering

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Workshops Prohibitions: ENGG1800 or CIVL1900 or CHNG1108 or AERO1560 or AMME1960 or MTRX1701 or ENGG1960 Assessment: Through semester assessment (90%) and Final Exam (10%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Limited Places due to TAFE component. Department Permission required for non-BE(Mech) students.
Objectives: a) To develop an understanding of the role of Mechanical Engineers and the core concepts within the discipline; b) To understand the content of the degree structure and how the subjects are applied; c) To develop an understanding of a range of machining and manufacturing processes required to make mechanical components.
Introductory Mechanical Engineering (60%): The subject introduces the core mechanical engineering concepts of design and mechanisms, intelligent systems, applied materials and fluid machinery. An overview is provided of the range of roles and the skills and knowledge required of a Mechanical Engineer. Emphasis is placed on the relationship between the subjects in the degree program and how they are applied by practicing engineers.
Workshop Technology (40%): An overview of a range of processes related to the design and manufacture of mechanical components is provided through hands-on experience. Workshop Technology practical work is undertaken in: (a) Hand tools, Machining, and Welding- an introduction to basic manufacturing processes used to fabricate mechanical engineering hardware. Safety requirements: All students are required to provide their own personal protective equipment (PPE) and comply with the workshop safety rules provided in class. Students who fail to do this will not be permitted to enter the workshops. In particular, approved industrial footwear must be worn, and long hair must be protected by a hair net. Safety glasses must be worn at all times. (b) Solid Modelling- the use of computer aided design (CAD) tools to model geometry and create engineering drawings of engineering components. (c) Microcontrollers- ubiquitous in modern engineered products- will be introduced through experiential learning with development kits.
MECH2400 Mechanical Design 1

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Assumed knowledge: ENGG1801 and ENGG1802, HSC Maths and Physics Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Aim: For students to experience a realistic the design process and to develop good engineering skills.
Course Objectives- To develop an understanding of: 1) The need for and use of standard drawings in the communication and definition of parts and assemblies to AS1100; 2) Efficient use of a CAD package; 3) Creativity; 4) The design process from initial idea to finished product; 5) Methods used to analyse designs; 6) Appreciation and analysis of standard components; 7) An understanding of power transmission elements.
MECH2660 Engineering Management

Credit points: 6 Session: Semester 2 Classes: Lectures, Major Project, Assignments Prohibitions: MECH3661 or AERO3660 Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims to: develop an understanding of the principles of management as applies particularly to the engineering and industrial settings. It aims to provide knowledge of the principles and tools that can assist communication, supervision, project management, team membership, decision making and risk management. At the end of this unit students will be able to understand different management practices and approaches applicable to a broad range of environments. In the process they will develop greater skills in team work, written expression, and verbal presentation.
The concepts covered in this unit are from the following management areas: Engineers and Management- including ethics, Communication and People in Organisations, Economics, Leadership, Managerial Decision Analysis, Marketing, Business Planning, Legal Environment of Business, Risk Management, Human Resource Management, Project Management, Quality Assurance and Management, Operations Management, and Financial Management.
MECH2901 Anatomy and Physiology for Engineers

Credit points: 6 Session: Semester 2 Classes: Lectures, Laboratories Prerequisites: (AMME1960 OR ENGG1960 OR BIOL1xxx OR AMME1961) AND [6cp junior Chemistry] Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study provides the underpinning knowledge needed in biomedical engineering designs. The anatomic and physiological functional knowledge gained in this subject will enhance prototype development of biomedical designs. Students should gain familiarity with anatomical and physiological terms and their meaning, understanding of the gross anatomy of the major systems in the human body and their importance in the design of biomedical devices and understanding of the major physiological principles which govern the operation of the human body.
MECH3260 Thermal Engineering 2

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: AMME2200 OR AMME2262. Assumed knowledge: Fundamentals of thermodynamics and fluid mechanics are needed to begin this more advanced course Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims to develop an understanding of: 1) The principles of thermodynamics- energy, entropy and exergy balances- applied to pure substances, mixtures and combustion and the application of these principles to engineering processes, power and refrigeration systems. 2) The principles of heat transfer- conductive, convective, radiative heat transfer- in the context of a variety of physical situations and the application of these principles in order to design and size engineering equipment and analyse engineering processes.
Course content includes: 1) Thermodynamics- properties of matter, energy, entropy and exergy balances for closed and steady state flow systems, mixtures, mixing and separation, psychrometry and air-conditioning and combustion- stoichiometry, first and second law analysis of reacting systems. 2) Heat Transfer- conduction, thermal circuits, general conduction equation, conduction through cylindrical bodies and fins, heat exchangers, transient conduction including analytic solutions, forced convection and natural convection, boiling and radiation- spectrum, intensity, surface radiative properties, environmental radiation, solar radiation.
At the end of this unit students will be able to: 1) Thermodynamics- apply the principles of thermodynamics and heat transfer to engineering situations; have the ability to tackle and solve a range of problems involving thermodynamic cycles, devices such as compressors and turbines, mixtures, air conditioning, combustion. 2) Heat Transfer- have the ability to tackle and solve a range of heat transfer problems including heat exchangers, cooling by fluids, quenching, insulation and solar radiation.
MECH3261 Fluid Mechanics 2

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prerequisites: AMME2200 OR (AMME2261 AND AMME2262) Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims to provide students with a detailed understanding of the theory and practice of fluid mechanics in the context of mechanical engineering. Students will gain skills in problem solving in areas of pipe, pump and channel flow; lift and drag on immersed bodies; boundary layer theory and gas dynamics.
At the end of this unit students will have the ability to critically assess and solve problems commonly found in fluid mechanics practice, such as sizing pumps and piping systems, designing channels, and determing the lift and drag characteristics of submerged bodies. Additionally, they will develop a structured and systematic approach to problem solving.
MECH3361 Mechanics of Solids 2

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: AMME2301 AND (AMME1362 OR AMME2302 OR CIVL2110) Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
The unit of study aims to: teach the fundamentals of analysing stress and deformation in a solid under complex loading associated with the elemental structures/components in aerospace, mechanical and biomedical engineering; develop the following attributes: understand the fundamental principles of solid mechanics and basic methods for stress and deformation analysis of a solid structure/element in the above mentioned engineering areas; gain the ability to analyse problems in terms of strength and deformation in relation to the design, manufacturing and maintenance of machines, structures, devices and elements in the above mentioned engineering areas.
At the end of this unit students will have a good understanding of the following: applicability of the theories and why so; how and why to do stress analysis; why we need equations of motion/equilibrium; how and why to do strain analysis; why we need compatibility equations; why Hooke's law, why plasticity and how to do elastic and plastic analysis; how and why to do mechanics modelling; how to describe boundary conditions for complex engineering problems; why and how to solve a mechanics model based on a practical problem; why and how to use energy methods for stress and deformation analysis; why and how to do stress concentration analysis and its relation to fracture and service life of a component/structure; how and why to do fundamental plastic deformation analysis; how and why the finite element method is introduced and used for stress and deformation analysis.
The students are expected to develop the ability of solving engineering problems by comprehensively using the skills attained above. The students will get familiar with finite element analysis as a research and analysis tool for various real-life problems.
MECH3362 Materials 2

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prerequisites: AMME2301 AND (AMME1362 OR AMME2302 OR CIVL2110) Assumed knowledge: This subject requires you to have two important skills to bring in: (1) A good understanding of basic knowledge and principles of material science and engineering from AMME2302 (MECH2300) Materials I and mechanics of solids for simple structural elements (in tension, bending, torsion) from AMME2301 (AERO2300); (2) Reasonable mathematical skills in calculation of stresses and strains in simple structural elements. Assessment: Through semester assessment (45%) and Final Exam (55%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims for students to understand the relationship between properties of materials and their microstructures and to improve mechanical design based on knowledge of mechanics and properties of materials.
At the end of this unit students should have the capability to select proper materials for simple engineering design.
Course content will include: short-term and long-term mechanical properties; introductory fracture and fatigue mechanics, dislocations; polymers and polymer composite materials; ceramics and glasses; structure-property relationships; selection of materials in mechanical design.
MECH3460 Mechanical Design 2

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: MECH2400 and AMME2301 Assumed knowledge: Properties of engineering materials including fatigue failure theories. Statics and dynamics properties of machines. Practical use of Word and Excel including the use of the 'solver' and graphing capabilities built into the spreadsheet. The use of a spreadsheet is mandatory. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims to apply some newly acquired skills to begin to understand how stress and strain are distributed in the more common categories of machine parts. Reducing the loads in standard parts to just the most significant, leads to a range of relatively simple analyses. By using different degrees of simplification and a proportional amount of effort, the examination of components can provide results of corresponding accuracy. To lead the student to utilise and be aware of modern computer methods, to be aware of past methods and be prepared of future developments. Not all the analysis of mechanical components are covered in the course but the ones that are deal with exemplify principles that can be applied to novel items that our graduates may encounter in their professional life.
At the end of this unit students will be able to: apply fatigue life prediction in general to any component; design a bolted joint to carry tensile and or shear loads: use a numerical solver to arrive at the optimal dimensions of a component, given its loads and sufficient boundary conditions; design shafts to carry specified steady and alternating bending moments and torques; design and construct a space frame, such as that for a dune buggy, to meet requirements of strength and rigidity; be able to arrive at the principle parameters of a pair of matched spur gears, and to be able to extend this to helical gears.
Course content will include: stress and strain in engineering materials; yield and ultimate fail conditions in malleable and brittle materials; spatial, 3D frameworks; deflections due to forces, moments and torques.
MECH3660 Manufacturing Engineering

Credit points: 6 Session: Semester 1 Classes: Laboratories, Lectures, Tutorials Prerequisites: MECH2400 OR ENGG1960 OR AMME1960 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The unit aims to teach the fundamentals of manufacturing processes and systems in mechanical, mechatronic and biomedical engineering, including traditional and advanced manufacturing technologies.
This unit aims to develop the following attributes: to understand the fundamental principles of manufacturing technologies for the above mentioned engineering areas; to gain the ability to select existing manufacturing processes and systems for direct engineering applications; to develop ability to create innovative new manufacturing technologies for advanced industrial applications; to develop ability to invent new manufacturing systems
At the end of this unit students will have a good understanding of the following: merits and advantages of individual manufacturing processes and systems; principles of developing new technologies; comprehensive applications and strategic selection of manufacturing processes and systems.
Course content will include:
Manufacturing Processes: Common processes and their science (machining, casting, powder metallurgy, metal working, welding); merits and limitations; CNC and CAM;
Manufacturing Systems: Economics in manufacturing; flexible manufacturing; group technology; materials selection and requirements planning; quality control; introduction to new technology; introduction to e-manufacturing; human factors; plant layout.
MECH3661 Engineering Management

This unit of study is not available in 2017

Credit points: 6 Session: Semester 2 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assumed knowledge: It is expected that students will understand the concepts previously presented in ENGG1803 Professional Engineering. It is assumed that the students have an understanding of professional engineering issues, and are experienced in academic writing (both essays and reports), including appropriate referencing techniques, oral presentations and the project management process (particularly in group situations). Such previous knowledge will assist students in the development their awareness of the issues involved with engineering management. Assessment: Through semester assessment (60%) Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit has two parts. The first part aims to develop knowledge and understanding of the current state of aerospace design, manufacturing, and operations in the Australian aviation industry. Students will gain skills in aerospace engineering management. On satisfactory completion of this unit, students will be able to apply risk management skills to a variety of industry situations and use appropriate methodology to manage these situations. Students will also become proficient in the use of Project Management tools and learn how to apply them to industry standard problems. Subject areas covered within the Unit of Study include principles and practice of aviation and airline management; discussion and analysis of airline operations and management in aerospace engineering design. The second part addresses general management principles as applies particularly to engineering and industrial settings. It aims to provide knowledge of the principles and tools that can assist communication, supervision, project management, team membership, decision making and management of human resources. At the end of this unit students will be able to understand different management practices and approaches applicable to a broad range of environments. The concepts covered are from the following management areas: Engineers and Management - including ethics, Communication and People in Organisations, Economics, Leadership, Strategic Management, Managerial Decision Analysis, Marketing, Business Planning, Legal Environment of Business, Risk Management, Human Resource Management, Project Management, Quality Assurance and Management, Operations Management, and Financial Management.
MECH3921 Biomedical Design and Technology

Credit points: 6 Session: Semester 2 Classes: Lectures, Presentation Prerequisites: (AMME2302 OR AMME1362) AND MECH2901 AND (MECH2400 OR ENGG1960 OR AMME1960) Prohibitions: AMME5921 Assumed knowledge: A basic understanding of human physiology and anatomy and an understanding of the engineering design process. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit aims to give students an understanding of the Australian and International biomedical industry and in the development, manufacture and uses of biomedical engineering products in therapeutic, rehabilitation and clinical settings. Students will gain an understanding of the process of biomedical regulation in Australia and other major international markets as well as the entire process of creating a new biomedical engineering product, from design through to marketing and monitoring of the product. Students will design a biomedical device including the preparation of a detailed design brief.
This will be done as a team project. Each team will work on a specific biomedical design project following formal design protocols, including design control, regulatory considerations, and commercialisation/IP considerations.
Course content will include: - Biomedical Design: A team design project on a medical device; - Intellectual Property in the biomedical industry; - Biomedical devices and technology; - Regulatory and clinical considerations in the biomedical industry; - Commercialisation strategies in the biomedical industry; - The Australian biomedical industry- an overview. Includes site visits; - The global biomedical industry- an overview. Includes site visits.
MECH4460 Mechanical Design 3

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: MECH2400 and MECH3460 Assumed knowledge: ENGG1802, AMME2301, AMME2500, MECH3361 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design. The unit utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse the individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by each category. The resulting analyses provide approximations to the actual stresses and it is possible to have different degrees of simplifications, requiring more or less work, giving better or worse approximations. Should a particular part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations.
Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.
MECH4601 Professional Engineering 2

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: ENGG4000. It is recommended that you have undertaken ENGG4000 Practical Experience in a period prior to undertaking this course, or be able to demonstrate equivalent understanding of professional practice as some assessment tasks will draw upon your experiences in professional engineering practice. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study aims to create an awareness of issues surrounding the management of projects; impart knowledge resulting in a more global approach to the practice of engineering and engineering management; and provide a vehicle for improving communication skills (both written and oral). The course also aims, when taken together with other courses offered by the School, to substantially meet the requirement of the Institution of Engineers, Australia, for undergraduate training in management theory and Professional Engineering skills. On completion of this unit students should be able to: plan small projects and contribute effectively to planning of larger projects; work effectively in small teams; understand their role and expected conduct in the management of engineering projects; perform well in that role from the outset, with performance limited only by experience; prepare an interesting and relevant presentation on aspects of their work for their peers or senior managers; recognise the range of expertise they may need to call on in their role as an engineer working on a project (e.g. in safety and environmental fields); understand what the experts are saying, and be able to contribute effectively to that discussion.
MECH4961 Biomechanics and Biomaterials

Credit points: 6 Session: Semester 2 Classes: Lectures Prerequisites: (ENGG1960 OR ENGG1802 OR PHYS1001) AND (AMME2302 OR AMME1362) AND MECH2901 AND MECH3921 Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This course is divided into two parts, biomechanics and biomaterials:
Biomechanics is the study of the body from the point of view of it being an engineering structure. There are many aspects to this since the human body contains soft tissues, hard tissues (skeletal system), and articulating joints. We will begin with a general introduction to biomechanics, modelling the human body from the macroscopic level to the microscopic level. We will then study soft tissue mechanics, with respect to both non-linear and viscoelastic descriptions, with a significant focus on the mathematical methods used in relation to the mechanics of the system. We will then look at specific aspects of biomechanics: muscle mechanics, joint mechanics, kinematics and dynamics of human gait (gait analysis), biomechanics of cells, physiological fluid flow, biomechanics of injury, functional and mechanical response of tissues to mechanical loading.
This course will involve the study of biomaterials from two perspectives: firstly, the response of the body towards the biomaterial- an immune response and foreign body reaction; secondly, the response of the biomaterial to the body- corrosion, biodegradation, and mechanical failure. Our study will begin with the response of the body towards the biomaterial. We will begin by looking at the immune system itself and then move on to look at the normal inflammatory response. We will then study in detail the foreign body reaction caused by biomaterials. The final part of this section is the study of protein adsorption onto biomaterials, with a strong focus on the Vroman effect. Then we will move onto the response of the biomaterial to the body. We will begin by a review of biomaterials, their applications, and compositions, and mechanical properties. We will then look at key problems such as corrosion, stress shielding, static fatigue, and mechanical failure. Finally, we will take a practical look at the materials themselves. Beginning with metals, then polymers (thermoplastic, thermosetting, and biodegradable), and finally ceramics (bioinert, biodegradable, and bioactive).
MECH5255 Air Conditioning and Refrigeration

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: MECH3260 OR MECH9260 OR MECH5262 Prohibitions: MECH4255 Assumed knowledge: Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study develops an advanced knowledge of air conditioning systems and refrigeration applications. At the completion of this unit students will be able to determine thermal loads on structures and design an air conditioning or refrigeration system with attention to comfort, control, air distribution and energy consumption. Course content will include: applied psychrometrics, air conditioning systems, design principles, comfort in the built environment, cooling load calculations, heating load calculations, introduction and use of computer-based load estimation packages software, air distribution, fans, ducts, air conditioning controls, advanced refrigeration cycles, evaporators, condensers, cooling towers, compressors, pumps, throttling devices, piping, refrigerants, control, refrigeration equipment, simulation of refrigeration systems, food refrigeration and industrial applications; Use of CFD packages as tools to simulate flows in building and to optimise air conditioning design, energy estimation methods and software, energy evaluation and management in the built environment. Use of experimental air conditioning systems to test for thermal balances and compare with simulations.
MECH5265 Combustion

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: (MECH3260 AND MECH3261) OR MECH5262 OR MECH9260 Assumed knowledge: Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study aims to teach the basic principles of combustion highlighting the role of chemical kinetics, fluid mechanics, and molecular transport in determining the structure of flames. Students will become familiar with laminar and turbulent combustion of gaseous and liquid fuels including the formation of pollutants. They will also be briefly introduced to various applications such as internal combustion engines, gas turbines, furnaces and fires.
This unit will cover equilibrium compositions, flammability limits, simple chemically reacting systems, detailed chemical kinetics, and the basic theory underlying laminar and turbulent combustion for both premixed and non-premixed cases. There will be an introduction to droplet combustion, the concept of mixture fraction for non-premixed flames, combustion in engines and gas turbines as well as the formation of pollutants. Fire ignition, growth and spread will also be covered with respect to safety in buildings including the hazards related to the formation of smoke and toxic products.
MECH5275 Renewable Energy

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Prerequisites: (MECH3260 AND MECH3261) OR (AERO3260 AND AERO3261) OR (MECH5262 AND MECH5261) OR (MECH9260 AND MECH9261) OR (AERO9260 AND AERO9261). Students claiming to have prerequisite knowledge based on study at other institutions must contact the unit of study coordinator before enrolling in this unit and may be required to sit a pre-exam to demonstrate that they have the necessary knowledge and skills to undertake this advanced level unit. Assumed knowledge: The students will require an understanding of the basic principles of fluid mechanics, thermodynamics and heat transfer, and the application of these principles to energy conversion systems. In particular, students should be able to analyse fluid flow in turbomachinery; perform first and second law thermodynamic analysis of energy conversion systems; and perform calculations of radiative, conductive and convective heat transfer. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
This unit aims to develop understanding of the engineering design and analysis of different devices and technologies for generating power from renewable sources including: solar, wind, wave, tidal, ocean thermal, geothermal, hydro-electric, and biofuels; to understand the environmental, operational and economic issues associated with each of these technologies. At the end of this unit students will be able to perform in depth technical analysis of different types of renewable energy generation devices using the principles of fluid mechanics, thermodynamics and heat transfer. Students will be able to describe the environmental, economic and operational issues associated with these devices.
MECH5304 Materials Failure

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: (AMME9301 OR AMME2301) AND (AMME9302 OR AMME2302 OR AMME1362) AND (MECH9361 OR MECH3361) AND (MECH9362 OR MECH5362) Assumed knowledge: Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Develop advanced knowledge and skills in diagnostic analyses of materials failure using advanced techniques; enhance students' ability in handling complex engineering cases using interdisciplinary technologies; and provide students an opportunity to understand project research.
Students will attend a series lectures on failure analyses of engineering materials addressing brittle rupture/fracture, yielding, cleavage fracture, fatigue and creep failure of engineering materials under static and dynamic loads. Students will also attend short introduction courses on optical microscopy and scanning electron microscopy (SEM) to gain some essential knowledge in diagnostic and forensic analyses of materials failure. Each student participates in a couple of group projects relevant to diagnostic analyses of failure of typical engineering materials such as steel, aluminium, magnesium alloys, engineering plastics and advanced fibre composites. Under the guidance of the supervisor, the student will learn how to initiate a proposal on failure analysis, how to do the project investigation and how to prepare and carry out technical communications (oral presentation and discussion between groups). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.
MECH5305 Smart Materials

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: (AMME9301 OR AMME5301 OR AMME2301) AND (AMME9302 OR AMME5302 OR AMME2302 OR AMME1362) Assumed knowledge: Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Develop an essential understanding of structure-property relationship of smart materials, as well as their applications in practical applications; develop student's capability to design functional structures using smart materials; and provide students an opportunity to learn the new knowledge through project approaches.
The unit of study covers the key knowledge of most smart materials such as dielectric, piezoelectric, magneto-electric and shape memory materials. Each student participates in a couple of group projects relevant to characterisation of structure-property relationship of functional structures with desired performance. Under the guidance of the supervisor, students will learn how to develop a proposal, how to do the project investigation and how to prepare and carry out the technical communications (writing and oral). In any of these scenarios, the student is directly responsible for the progress and quality of the results. At the end of the semester, the student is required to submit a written project report and to give a seminar presenting the aims and achievements of the project.
MECH5310 Advanced Engineering Materials

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Laboratories Prerequisites: (AMME2301 OR AMME9301) AND (AMME2302 OR AMME1362 OR AMME9302) AND (MECH3362 OR MECH9362) Prohibitions: MECH4310 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
To understand (a) how to define the relationship between properties and microstructures of advanced engineering materials, (b) how to improve mechanical design with the knowledge of mechanics and properties of materials, and (c) how to conduct failure diagnosis of engineering materials.
Advanced polymer matrix composites, smart/functional materials, high-strength ferrous and non ferrous alloys, superalloys, high performance polymers, eco-materials, thin film science and technology, advanced joining methods, processing-structure-property relationship, damage tolerance, toughening mechanisms, structure integrity and reliability.
MECH5416 Advanced Design and Analysis

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prerequisites: (AMME2301 OR AMME9301) AND (AMME2500 OR AMME9500) AND (MECH2400 OR MECH9400) Assumed knowledge: ENGG1802 - Eng Mechanics, balance of forces and moments; AMME2301 - Mechanics of Solids, 2 and 3 dimensional stress and strain; AMME2500 - Engineering Dynamics - dynamic forces and moments; MECH2400 - Mechanical Design 1, approach to design problems and report writing, and preparation of engineering drawing; MECH3460 - Mechanical design 2, means of applying fatigue analysis to a wide range of machine components Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This UoS utilises assumed theoretical knowledge and skills to elucidate the stresses and strains that exit in the different categories of machine parts. It sets out to make the students familiar with the simplifications that are applied to arrive at the analytic expressions commonly used to analyse each individual categories parts. These simplifications usually begin by assuming that only particular types of loads are carried by teh parts in that category. The resulting analyses provide approximations to the actual stresses. It is possible to have different degrees of simplifications, requiring more or less work, giving better or poorer approximations. Should a part be used to carry loads that were not allowed for in the traditional method then some more appropriate method must be found or developed. An important aspect is to make the student practiced in a range of modern concepts, techniques and tools, and to be made aware of their strengths and limitations.
This unit of study teaches the student how to recognise where and how their theoretical skills can be applied to the practical situations that they may encounter in this field of design.
Options may be provided in the choice of design assignments. Biomedical engineering and vehicle design problems may be provided as options to more general machine design problems.
MECH5720 Sensors and Signals

Credit points: 6 Session: Semester 2 Classes: Lectures, Project Work - own time, Presentation, Laboratories, Tutorials Prohibitions: MECH4720 Assumed knowledge: Strong MATLAB skills Assessment: Through semester assessment (65%) and Final Exam (35%) Mode of delivery: Normal (lecture/lab/tutorial) day
Syllabus Summary: This course starts by providing a background to the signals and transforms required to understand modern sensors. It goes on to provide an overview of the workings of typical active sensors (Radar, Lidar and Sonar). It provides insight into basic sensing methods as well as aspects of interfacing and signal processing. It includes both background material and a number of case studies.
The course covers the following topics: a) SIGNALS: Convolution, The Fourier Transform, Modulation (FM, AM, FSK, PSK etc), Frequency shifting (mixing); b) PASSIVE SENSORS: Infrared Radiometers, Imaging Infrared, Passive Microwave Imaging, Visible Imaging & Image Intensifiers; c) ACTIVE SENSORS THE BASICS: Operational Principles, Time of flight (TOF) Measurement and Imaging of Radar, Lidar and Sonar, Radio Tags and Transponders, Range Tacking, Doppler Measurement, Phase Measurement; d) SENSORS AND THE ENVIRONMENT: Atmospheric Effects, Target Characteristics, Clutter Characteristics, Multipath; e) ACTIVE SENSORS: ADVANCED TECHNIQUES: Probability of Detection, Angle Measurement and Tracking, Combined Range/Doppler and Angle Tracking, Frequency Modulation and the Fast Fourier Transform, High Range Resolution, Wide Aperture Methods, Synthetic Aperture Methods (SAR)
Objectives: The course aims to provide students with a good practical knowledge of a broad range of sensor technologies, operational principles and relevant signal processing techniques.
Expected Outcomes: A good understanding of active sensors, their outputs and applicable signal processing techniques. An appreciation of the basic sensors that are available to engineers and when they should be used.
MECH5907 Orthopaedic and Surgical Engineering

Credit points: 6 Session: Semester 2 Classes: Lectures Prerequisites: (AMME2302 OR AMME9302 OR AMME1362) AND (MECH2901 OR AMME9901) AND (MECH3921 OR AMME5921) Prohibitions: MECH4902 Assumed knowledge: 1.Basic concepts in engineering mechanics - statics, dynamics, and solid mechanics. 2.Basic concepts in materials science, specifically with regard to types of materials and the relation between properties and microstructure. 3.A basic understanding of human biology and anatomy. Assessment: through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The aims and objectives of the unit of study are: 1. To introduce the student to the details and practice of orthopaedic engineering; 2. To give students an overview of the diverse knowledge necessary for the design and evaluation of implants used in orthopaedic surgery; 3. To enable students to learn the language and concepts necessary for interaction with orthopaedic surgeons and the orthopaedic implant industry; 4. To introduce the student to the details and practice of other engineering applications in surgery, particularly in the cardiovascular realm.