Skip to main content
Unit outline_

DESC9197: Energy Management and Code Compliance

Semester 2, 2024 [Block mode] - Camperdown/Darlington, Sydney

Objectives of this unit are to give students an understanding of energy consumption issues in buildings against the backdrop of escalating energy and carbon emission reduction targets for the built environment. In order to meet these targets, new design and operational management techniques are needed, including energy auditing, retrofitting and energy efficiency optimisation techniques. This unit is primarily concerned with energy management in buildings and Code compliance in Australia. Various methods of assessing energy performance will be explored, with emphasis on energy simulation. Students will be given an opportunity to understand Australian standards and building energy rating schemes, and how to apply them to the design and operation of buildings.

Unit details and rules

Academic unit Architectural and Design Science
Credit points 6
Prerequisites
? 
None
Corequisites
? 
None
Prohibitions
? 
None
Assumed knowledge
? 

DESC9015

Available to study abroad and exchange students

Yes

Teaching staff

Coordinator Jungsoo Kim, jungsoo.kim@sydney.edu.au
Lecturer(s) Jungsoo Kim, jungsoo.kim@sydney.edu.au
PC Thomas, p.c.thomas@sydney.edu.au
The census date for this unit availability is 2 September 2024
Type Description Weight Due Length
Assignment Assignment 1
Report
40% Week 05
Due date: 30 Aug 2024 at 23:59
max. 5 pages (A4)
Outcomes assessed: LO1 LO2 LO3 LO6 LO7
Assignment Assignment 2
Case study
60% Week 13
Due date: 02 Nov 2024 at 23:59
max. 25 pages (A4)
Outcomes assessed: LO1 LO2 LO3 LO4 LO5 LO6 LO7

Assessment summary

  • Assignment 1: A written report on various topics discussed in class, incl. building energy performance, simulation, regulation and standard. 
  • Assignment 2: Application of the JV3 alternate verification method. You are the ESD Consultant on this project and have been engaged to provide a NCC Section-J compliance solution using DesignBuilder simulation and a report for the NCC Certifier.
Detailed information for each assessment will be given in class

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2021 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

This unit has an exception to the standard University policy or supplementary information has been provided by the unit coordinator. This information is displayed below:

In accordance with University of Sydney School of Architecture Design and Planning Faculty Resolutions 2022, for every calendar day up to and including 10 calendar days after the due date, a penalty of 5% of the maximum awardable marks will be applied to the late work. For work submitted more than 10 calendar days after the due date, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Support for students

The Support for Students Policy 2023 reflects the University’s commitment to supporting students in their academic journey and making the University safe for students. It is important that you read and understand this policy so that you are familiar with the range of support services available to you and understand how to engage with them.

The University uses email as its primary source of communication with students who need support under the Support for Students Policy 2023. Make sure you check your University email regularly and respond to any communications received from the University.

Learning resources and detailed information about weekly assessment and learning activities can be accessed via Canvas. It is essential that you visit your unit of study Canvas site to ensure you are up to date with all of your tasks.

If you are having difficulties completing your studies, or are feeling unsure about your progress, we are here to help. You can access the support services offered by the University at any time:

Support and Services (including health and wellbeing services, financial support and learning support)
Course planning and administration
Meet with an Academic Adviser

WK Topic Learning activity Learning outcomes
Week 02 Key concepts of building simulation; Residential energy codes and rating systems Lecture (7 hr) LO1 LO2 LO3 LO6 LO7
Week 04 Energy rating systems and energy management Lecture (7 hr) LO1 LO2 LO3 LO4 LO6 LO7
Week 06 Energy code compliance; Energy modelling Lecture and tutorial (7 hr) LO2 LO3 LO4 LO5 LO6 LO7
Week 08 Building simulation as NCC alternative solution Part 1 Lecture and tutorial (7 hr) LO1 LO2 LO3 LO5 LO6 LO7
Week 11 Building simulation as NCC alternative solution Part 2 Lecture and tutorial (7 hr) LO1 LO2 LO3 LO5 LO6 LO7

Attendance and class requirements

Please refer to the Resolutions of the University School: University of Sydney School of Architecture Design and Planning Faculty Resolutions 2022. Clause 8 (3) (a). Students are expected to attend a minimum of 90% of timetabled activities for each unit of study, unless granted exemption.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Required readings

Readings and various support materials will be posted to the unit’s Canvas site across the semester.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. understand energy consumption issues in buildings against the backdrop of escalating energy and carbon emission reduction targets for the built environment
  • LO2. understand the principles of energy auditing, retrofitting, and energy efficiency optimisation techniques in buildings
  • LO3. understand energy efficiency standards and rating schemes in the Australian context
  • LO4. apply principles of energy management in buildings and code compliance requirements in Australia
  • LO5. perform basic energy performance assessments in buildings
  • LO6. demonstrate improved ability of critical thinking and of critical analysis of evidence
  • LO7. demonstrate improved ability to critically and synthetically analyse the issues, and to efficaciously communicate the technical information.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered.

Additional costs

N/A

Site visit guidelines

N/A

Work, health and safety

There are no specific WHS requirements for this unit.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.