Skip to main content
Unit outline_

PHYS2921: Physics 2A (Special Studies Program)

Semester 1, 2023 [Normal day] - Camperdown/Darlington, Sydney

How energy and matter interact is at the very foundation of physics. We will explore two of the most important aspects of such interactions, as well as developing skills in experimental and computational physics. This unit is the same as PHYS2911, but with some labs replaced by an open-ended research project. First, we will study optics, the properties of light and its interactions with matter. We will focus on the wave nature of light and effects such as refraction, diffraction and interference. In our second module we will study thermodynamics, a subject central to many branches of science, with applications from the smallest systems of atoms to the big bang. We will examine the concepts such as entropy, thermodynamic interactions, engines and heat. In the computational physics module students will develop computational thinking skills for simulating and understanding physics. These skills are essential to modern physics, particularly in a diversity of complex systems, from the brain and AI to quantum computing. In the experimental physics and research module students will carry out one experiment and then a research project, working within one of the research groups from the School of Physics.

Unit details and rules

Academic unit Physics Academic Operations
Credit points 6
Prerequisites
? 
75 or above in (PHYS1901 or PHYS1001 or PHYS1002 or PHYS1903) and 75 or above in (PHYS1902 or PHYS1003 or PHYS1004 or PHYS1904)
Corequisites
? 
None
Prohibitions
? 
PHYS2011 or PHYS2911
Assumed knowledge
? 

First year thermodynamics as studied in PHYS1001 or PHYS1901/PHYS1903. Students who have done PHYS1002 should self-study chapters 17-20 of the first year textbook (Pearson's University Physics) prior to the thermodynamics module of this unit. (MATH1X21 or MATH1931 or MATH1X01 or MATH1906) and (MATH1X02) and (MATH1X23 or MATH1933 or MATH1X03 or MATH1907) and (MATH1X05)

Available to study abroad and exchange students

Yes

Teaching staff

Coordinator Scott Croom, scott.croom@sydney.edu.au
Laboratory supervisor(s) Scott Croom, scott.croom@sydney.edu.au
Pulin Gong, pulin.gong@sydney.edu.au
Lecturer(s) Sahand Mahmoodian, sahand.mahmoodian@sydney.edu.au
Martijn de Sterke, martijn.desterke@sydney.edu.au
Project supervisor(s) Helen Johnston, h.johnston@sydney.edu.au
Type Description Weight Due Length
Supervised exam
? 
Final examination
Optics/Thermodynamics
40% Formal exam period 2 hours
Outcomes assessed: LO1 LO2 LO5 LO7
Small continuous assessment Optics/Thermodynamics continuous assessment
Optics and thermodynamics, short quizzes and other submitted work.
5% Ongoing approx 1hr per week
Outcomes assessed: LO1 LO7 LO5 LO4 LO2
Small continuous assessment SSP project group assessment
Performance during the research project.
8.4% Ongoing Semester long research project.
Outcomes assessed: LO3 LO7 LO6 LO5 LO4
Assignment Optics - Assignment
Optics written assignment submitted online
2.5% Week 06
Due date: 02 Apr 2023 at 23:59
Variable
Outcomes assessed: LO1 LO2 LO4
Tutorial quiz Thermodynamics - Quiz
In-lecture quiz
2.5% Week 12 20 mins
Outcomes assessed: LO1 LO5 LO4 LO2
Presentation SSP presentation
presentation on SSP project
4.2% Week 13 10mins
Outcomes assessed: LO3 LO7 LO6 LO5 LO4
Tutorial quiz Computational lab test
Test of Matlab and computational lab skills
11% Week 13 1 hour
Outcomes assessed: LO1 LO7 LO5 LO4 LO3 LO2
Assignment SSP project report
Report based on SSP research project.
8.4% Week 13
Due date: 28 May 2023 at 23:59
Semester long SSP project.
Outcomes assessed: LO3 LO4 LO5 LO6 LO7
Small continuous assessment Experimental Physics
One experiment (5 weeks)
9% Weekly 2 hours
Outcomes assessed: LO3 LO7 LO6 LO5 LO4
Small continuous assessment Computational Lab
Computational physics in-class assessment
9% Weekly 2 hours
Outcomes assessed: LO1 LO7 LO5 LO2

Assessment summary

  • Optics/Thermodynamics continuous assessment: quizzes and other submitted work (e.g. problem sets) that will be available weekly and/or within lectures.
  • Optics Assignment: Assignment questions will be available from the Canvas site. Students submit individual (not group) responses to assignments.
  • Thermodynamics Quiz: This is a quiz with multiple questions to be completed individually, through Canvas. It will occur during your regular lecture. The questions will test conceptual understanding and ability to calculate quantities.
  • Experimental Physics + Research Project: Assessment is based on: i) successful completion of one experiment, ii)  overall performance in the research project (determined by your research group), iii) oral presentation about the research project and iv) a written report about the research project. For the experiment you will be graded using a rubric which assesses several aspects of your experimental work, including how well you prepared, your experimental procedure, logbook keeping skills, data analysis, and the results that you obtained. A copy of the grading rubric will be provided early in the semester.
  • Computational Lab: The total mark for the computational physics lab module is out of 20 marks: 11 marks will be for an in-lab exam and 9 marks for participation in labs. All codes you use in the labs will be provided in the test and exam, and specimen papers will be provided on the Canvas site.
  • Final examination: Optics/Thermodynamics: It consists of two parts: Section A is on Optics and Section B is on Thermodynamics.  Lists of Physical Constants and Formulas needed are provided in the paper. Past papers are available for review.   If a second replacement exam is required, this exam may be delivered via an alternative assessment method, such as a viva voce (oral exam). The alternative assessment will meet the same learning outcomes as the original exam. The format of the alternative assessment will be determined by the unit coordinator.

Detailed information for each assessment can be found on Canvas.

 

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

At HD level, a student demonstrates a flair for the subject as well as a detailed and comprehensive understanding of the unit material. A ‘High Distinction’ reflects exceptional achievement and is awarded to a student who demonstrates the ability to apply their subject knowledge and understanding to produce original solutions for novel or highly complex problems and/or comprehensive critical discussions of theoretical concepts.

Distinction

75 - 84

At DI level, a student demonstrates an aptitude for the subject and a well-developed understanding of the unit material. A ‘Distinction’ reflects excellent achievement and is awarded to a student who demonstrates an ability to apply their subject knowledge and understanding of the subject to produce good solutions for challenging problems and/or a reasonably well-developed critical analysis of theoretical concepts.

Credit

65 - 74

At CR level, a student demonstrates a good command and knowledge of the unit material. A ‘Credit’ reflects solid achievement and is awarded to a student who has a broad general understanding of the unit material and can solve routine problems and/or identify and superficially discuss theoretical concepts.

Pass

50 - 64

At PS level, a student demonstrates proficiency in the unit material. A ‘Pass’ reflects satisfactory achievement and is awarded to a student who has threshold knowledge.

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
Multiple weeks Optics weeks 1-7 Lecture (2 hr) LO1 LO2 LO4 LO5 LO6 LO7
Thermodynamics weeks 7-13 Lecture (2 hr) LO1 LO2 LO4 LO5 LO6 LO7
Week 01 Experimental lab introduction and registration Practical (1 hr) LO3 LO4 LO5 LO6 LO7
Weekly Experimental physics lab Practical (2 hr) LO3 LO4 LO5 LO6 LO7
Computational Physics Computer laboratory (2 hr) LO1 LO2 LO4 LO5 LO6 LO7
SSP Research Project Practical (3 hr) LO3 LO4 LO5 LO6 LO7

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. understand the key concepts in two foundation areas of physics - optics and thermodynamics
  • LO2. apply these concepts to develop models, and to solve qualitative and quantitative problems in scientific and engineering contexts, using appropriate mathematical and computing techniques as necessary
  • LO3. understand the nature of scientific measurement, and skills in the measurement of physical quantities and the handling of data
  • LO4. find and analyse information and judge its reliability and significance
  • LO5. communicate scientific information appropriately, both orally and through written work
  • LO6. engage in team and group work for scientific investigations and for the process of learning
  • LO7. develop a sense of responsibility, ethical behaviour and independence as a learner and as a scientist.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

updated comp lab test.

The optics lecture will cover the following topics:

  • Geometrical optics – revision
  • Two Source Interference
  • Diffraction from single and multiple slits and circular apertures
  • Interference and Diffraction 
  • Coherence of light
  • Interference in Thin Films
  • Interferometers - Michelson and Fabry-Perot Interferometers
  • Polarisation
  • Birefringence

Thermodynamics lectures will cover the following topics:

  • Revision of ideal gas law, internal energy and equipartition
  • First law and heat engines and refrigerators
  • The Second law
  • Probabilistic approach to entropy and thermodynamics
  • Equilibrium & the first law of thermodynamics identity
  • Chemical potential & extended first thermodynamic identity
  • Helmholtz & Gibb free energy
  • Thermodynamic potentials & the second law

Work, health and safety

We are governed by the Work Health and Safety Act 2011, Work Health and Safety Regulation 2011 and Codes of Practice. Penalties for non-compliance have increased. Everyone has a responsibility for health and safety at work. The University’s Work Health and Safety policy explains the responsibilities and expectations of workers and others, and the procedures for managing WHS risks associated with University activities.

General Laboratory Safety Rules

  • No eating or drinking is allowed in any laboratory under any circumstances

  • A laboratory coat and closed-toe shoes are mandatory

  • Follow safety instructions in your manual and posted in laboratories

  • In case of fire, follow instructions posted outside the laboratory door

  • First aid kits, eye wash and fire extinguishers are located in or immediately outside each laboratory

  • As a precautionary measure, it is recommended that you have a current tetanus immunisation. This can be obtained from University Health Service: unihealth.usyd.edu.au/

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.