Skip to main content
Unit outline_

PLAN9011: Planning Dissertation 2

Semester 1, 2020 [Normal day] - Camperdown/Darlington, Sydney

The planning dissertation is a substantial piece of research, conducted full time over one semester (by enrolment in PLAN9010 and PLAN9011), or part time over two semesters (by consecutive enrolment in these units). It takes the form of a document (between 15,000 and 25,000 words) on an approved urban and regional planning subject of your choice. There is also an option for students to prepare a shorter document suitable for publication in a refereed journal. The planning dissertation is an opportunity to advance your knowledge and skills in a particular area. For those intending to undertake further academic study, the dissertation also provides an opportunity for you to develop your research and inquiry skills. The objective of the dissertation is to allow you to develop higher order research and analytic skills by undertaking an in depth study of your own selection. The expected learning outcomes of the dissertation include the ability to: think critically about a planning problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to urban and regional planning issues; undertake primary and secondary research; present your findings in a way that demonstrates academic and professional competence. A dissertation generally includes: a strong literature review to delineate a problem or gap in knowledge; a statement of research aims or objectives, as well as research questions and / or hypotheses; explanation of research methods; presentation and analysis of data; discussion of conclusions; an abstract. Permission to continue the Planning Dissertation is subject to a satisfactory research proposal which must be approved by your supervisor by week 3 of semester. The dissertation will be marked by two examiners and may include an oral presentation. Dissertations are due at the end of the first week of exams for the semester in which you are enrolled in Planning Dissertation 2. Note that only one submission is required for both Planning Dissertation 1 and 2. It is not possible to complete Dissertation 1 independently of Dissertation 2. Students who intend a shorter project should enrol in PLAN9018 Planning Report.

Unit details and rules

Academic unit Urban and Regional Planning and Policy
Credit points 12
Prerequisites
? 
None
Corequisites
? 
PLAN9010
Prohibitions
? 
None
Assumed knowledge
? 

PLAN9068, PLAN9061, PLAN9063, PLAN9045, PLAN9064, ARCH9100

Available to study abroad and exchange students

No

Teaching staff

Coordinator Donald McNeill, d.mcneill@sydney.edu.au
Lecturer(s) Donald McNeill, d.mcneill@sydney.edu.au
Type Description Weight Due Length
Presentation Presentation and poster
Presentation, poster
10% Week 12
Due date: 22 May 2020 at 17:00
10 minutes
Outcomes assessed: LO1 LO4 LO3 LO2
Dissertation Planning dissertation
Written task
90% Week 14 (STUVAC)
Due date: 12 Jun 2020 at 23:00
25000 words
Outcomes assessed: LO1 LO2 LO3 LO4

Assessment summary

  • Presentation and poster: The final presentation and poster provide an opportunity to get feedback on your work prior to submitting your final report. Prepare hand-outs if required. Posters will be displayed on the presentation day and students are expected to stay for the exhibition. This year there may be a school-wide exhibition where posters and students may be invited. Both copies of the presentation and poster will be required to be sent to the unit coordinator prior to the day.
  • Planning dissertation: A dissertation is to be no more than
    25,000 words. Information about the requirements for content and submission will be provided in class.

Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a High distinction indicates work of an exceptional standard, a Distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

Work of outstanding quality, demonstrating mastery of the learning outcomes
assessed. The work shows significant innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or exceptional skill.

Distinction

75 - 84

Work of excellent quality, demonstrating a sound grasp of the learning
outcomes assessed. The work shows innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or superior skill.

Credit

65 - 74

Work of good quality, demonstrating more than satisfactory achievement of the
learning outcomes assessed, or work of excellent quality for a majority of the
learning outcomes assessed.

Pass

50 - 64

Work demonstrating satisfactory achievement of the learning outcomes
assessed.

Fail

0 - 49

Work that does not demonstrate satisfactory achievement of one or more of the
learning outcomes assessed.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
Week 01 Introductory Lecture Lecture (2 hr) LO1 LO2 LO3 LO4
Week 03 Initial project proposal presentation Lecture (2 hr) LO1 LO2 LO3 LO4
Week 12 Final presentation Lecture (2 hr) LO1 LO2 LO3 LO4

Attendance and class requirements

  • Referencing: Harvard or APA 6th. All references are to be in English. Translations from other languages will not be accepted.

 

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 12 credit point unit, this equates to roughly 240-300 hours of student effort in total.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. think critically about a planning or policy problem, and develop and apply an appropriate research methodology or analytical approach to address it
  • LO2. identify, access and analyse appropriate sources of information, research and literature relevant to urban and regional planning and policy issues
  • LO3. undertake primary and secondary research relevant to urban planning policy or practice
  • LO4. communicate research findings verbally and in writing in a way that demonstrates academic and professional competence.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered

Additional costs

Some costs may be incurred by the student in the production of the report.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.