Skip to main content
Unit outline_

DESC9015: Building Energy Analysis

Semester 1, 2024 [Block mode] - Camperdown/Darlington, Sydney

The aim of the unit is to acquaint students with the range of analytical and design tools available for low energy building design; to provide the opportunity for students to become proficient at using some of these tools. Among the techniques and tools explored are: climate data analysis; graphical and model techniques for solar studies; steady state and dynamic heat flow analysis; simplified methods for sizing passive solar elements; computer models of thermal performance; modelling ventilation; estimating energy consumption. Emphasis is given to tools which assist the design of the building fabric rather than building systems. At the end of the unit it is expected that students will: be aware of the importance of quantitative analysis in the design of low energy buildings; have an understanding of the theoretical basis of a range of analytical techniques; be familiar with the range of techniques available for building energy analysis; be able to apply many of these to design analysis; be familiar with the range of thermal analysis computer software available; and be able to use a software package to analyse the thermal performance of a typical small scale building. All of the assignments are designed to provide students with hands-on experience of each of the analysis tools.

Unit details and rules

Academic unit Architectural and Design Science
Credit points 6
Prerequisites
? 
None
Corequisites
? 
None
Prohibitions
? 
None
Assumed knowledge
? 

None

Available to study abroad and exchange students

Yes

Teaching staff

Coordinator Ozgur Gocer, ozgur.gocer@sydney.edu.au
The census date for this unit availability is 2 April 2024
Type Description Weight Due Length
Assignment Indoor thermal comfort and daylight performance analysis of a building
Written with non-written elements
60% Formal exam period
Due date: 03 Jun 2024 at 23:59
A2 x 10 pages
Outcomes assessed: LO1 LO2 LO3 LO4 LO5 LO6
Assignment group assignment A sensitivity analysis of building envelope
Written with non-written elements
40% Week 07
Due date: 08 Apr 2024 at 23:59
A2 x 10 pages
Outcomes assessed: LO1 LO2 LO3 LO4 LO5 LO6
group assignment = group assignment ?

Assessment summary

  • Sensitivity analysis of a building envelope: The purpose of this task is to establish your understanding of integrated design, modeling, and basic analysis processes by using energy analysis software tool DesignBuilder.  You are required to model and perform a sensitivity analysis of the building envelope and daylight performance of a selected building design. 
  • Indoor thermal comfort and energy performance analysis of a buildingThe assessment aims to improve the thermal comfort in each of the day time and night time use spaces or thermal zones. This improvement is to be determined by reducing the number of discomfort hours when compared to an initial design. 
Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2021 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction an excellent standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

Work of outstanding quality, demonstrating mastery of the learning outcomes
assessed. The work shows significant innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or exceptional skill.

Distinction

75 - 84

Work of excellent quality, demonstrating a sound grasp of the learning outcomes
assessed. The work shows innovation, experimentation, critical analysis,
synthesis, insight, creativity, and/or superior skill.

Credit

65 - 74

Work of good quality, demonstrating more than satisfactory achievement of the
learning outcomes assessed, or work of excellent quality for a majority of the
learning outcomes assessed.

Pass

50 - 64

Work demonstrating satisfactory achievement of the learning outcomes
assessed.

Fail

0 - 49

Work that does not meet the learning outcomes of the unit to a satisfactory standard.

 

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

This unit has an exception to the standard University policy or supplementary information has been provided by the unit coordinator. This information is displayed below:

In accordance with the University of Sydney School of Architecture Design and Planning Faculty Resolutions 2022, for every calendar day up to and including 10 calendar days after the due date, a penalty of 5% of the maximum awardable marks will be applied to the late work. For work submitted more than 10 calendar days after the due date, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Support for students

The Support for Students Policy 2023 reflects the University’s commitment to supporting students in their academic journey and making the University safe for students. It is important that you read and understand this policy so that you are familiar with the range of support services available to you and understand how to engage with them.

The University uses email as its primary source of communication with students who need support under the Support for Students Policy 2023. Make sure you check your University email regularly and respond to any communications received from the University.

Learning resources and detailed information about weekly assessment and learning activities can be accessed via Canvas. It is essential that you visit your unit of study Canvas site to ensure you are up to date with all of your tasks.

If you are having difficulties completing your studies, or are feeling unsure about your progress, we are here to help. You can access the support services offered by the University at any time:

Support and Services (including health and wellbeing services, financial support and learning support)
Course planning and administration
Meet with an Academic Adviser

WK Topic Learning activity Learning outcomes
Week 03 • Unit Introduction • Building energy systems and building performance simulation tools • Energy modeling in building design process and practices in AU • Energy simulation & Introduction to Design Builder Lecture (3 hr) LO1 LO2
Introduction to DesignBuilder Introduction to Assessment 1 Creating sun path diagrams for an existing building for different climates and orientations Tutorial (4 hr) LO2 LO4
Week 05 Natural light and visual comfort Daylighting and Shade Analysis Window 5.2 tool Sensitivity Analysis and Optimization in building simulation Lecture (3 hr) LO1 LO2 LO5
Shading device design, daylighting analysis Tutorial (4 hr) LO1 LO2 LO3 LO4 LO5 LO6
Week 07 Natural Ventilation Assignment 1 Presentation Introduction to Assignment 2 Lecture (3 hr) LO1 LO2 LO4 LO5
The effect of building construction systems (walls, roof/ceiling, etc) and glazing system performance (U-value, SHGC and VLT Tutorial (4 hr) LO1 LO2 LO3 LO4 LO5 LO6
Week 10 Thermal Comfort Heat transfer through the building envelope Internal heat gains/Occupant Behaviour Lecture (3 hr) LO1 LO2 LO3 LO5
Internal gains (artificial lighting, occupants, equipment etc.) Natural ventilation Tutorial (4 hr) LO4 LO6
Week 11 Climate responsive design/ Conclusion to the unit Lecture (3 hr) LO1 LO2 LO4 LO5
Q@A session on individual projects Creating visual images (graphs & charts) Tutorial (4 hr) LO3 LO4 LO5 LO6

Attendance and class requirements

1. Please refer to the Resolutions of the University School: University of Sydney School of Architecture Design and Planning Faculty Resolutions 2022

Clause 8 (3) (a). Students are expected to attend a minimum of 90% of timetabled activities for each unit of study unless granted exemption.

 

2.Students are required to submit an application for special consideration if they need an extension for an assignment.

3.Special consideration is only applicable for short-term circumstances that are beyond your control, such as illness, injury or misadventure. UoS Coordinators can permit a simple extension under special circumstances.

4.More information and details available at:
http://sydney.edu.au/students/special-consideration-and-arrangements.html

5.Unless a special consideration is approved or a disability adjustment is granted, penalties apply to late submissions: http://sydney.edu.au/architecture/documents/CS/forms/latesubattendance.pdf

6.Turnitin similarity matching software must be used for all assignments. It can only accept files 40 MB or less

7.Reference any material that is not yours.

8.  All instances of Academic dishonesty will be reported.

9.  For more details on Academic Appeals, please see: http://sydney.edu.au/student_affairs/academic_appeals/process.shtml

10. Students must acknowledge all sources of feedback, editing, and proof-reading.

11. More information and details available at:
http://sydney.edu.au/handbooks/architecture/rules/faculty_resolutions.shtml

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Required readings

1- Magoulès, Frédéric, and Hai‐Xiang Zhao. “Overview of Building Energy Analysis.” Data Mining and Machine Learning in Building Energy Analysis. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. 1–16. Web.

2- Hensen, Jan, and Roberto Lamberts. Building Performance Simulation for Design and Operation . Second edition. Abingdon, Oxon ;: Routledge, 2019. Web.

3- Wilde, Pieter. Building Performance Analysis. Chichester, UK: John Wiley & Sons, Ltd, 2018. Web.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. generate a grounded unique insight into the sustainable design of buildings
  • LO2. learn independently based on investigation of issues relating to sustainable design
  • LO3. demonstrate a developed interest in and awareness of the well founded knowledge of sustainable design for buildings and their environment
  • LO4. apply critical reasoning to the issues of the design of environment and independent, informed technical judgement of buildings
  • LO5. evaluate opinions from literature in the field, make design decisions and to reflect critically on the justifications for those decisions made
  • LO6. collect, analyse and organise information and ideas regarding buildings, their design development, detailing, and relationship to the environment, and to convey those ideas clearly and fluently, in both written and spoken forms.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

The submission format of the assessments have been revised.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.