2024

• Zhu, C., Easton, M., Fordyce, I., Sun, S., Annasamy, M., Fabijanic, D., Short, K., Paradowska, A., Leary, M., Brandt, M. (2024). Effect of boron addition on the microstructure and wear resistance of laser beam directed energy deposited high chromium white irons. Wear, 546-547, 205320. [More Information]
• Yakubov, V., Ostergaard, H., Bhagavath, S., Leung, C., Hughes, J., Yasa, E., Khezri, M., Loschke, S., Li, Q., Paradowska, A. (2024). Multimodal defect analysis and application of virtual machining for solid-state manufactured aluminium structure. Progress in Additive Manufacturing. [More Information]
• Wan, B., Yoda, N., Zheng, K., Zhang, Z., Wu, C., Clark, J., Paradowska, A., Swain, M., Li, Q. (2024). On effect of residual stress on fracture behavior of mandibular reconstruction plates. Engineering Fracture Mechanics, 305, 110158. [More Information]
• Yakubov, V., Ostergaard, H., Bhagavath, S., Leung, C., Hughes, J., Yasa, E., Khezri, M., Loschke, S., Li, Q., Paradowska, A. (2024). Recycled aluminium feedstock in metal additive manufacturing: A state of the art review. Heliyon, 10(5). [More Information]
• Alipooramirabad, H., Kianfar, S., Paradowska, A., Ghomashchi, R. (2024). Residual stress measurement in engine block—an overview. International Journal of Advanced Manufacturing Technology, 131(1), 1-27. [More Information]

2023

• Wu, Y., Lun Pun, C., Huang, P., Welsby, D., Mutton, P., Paradowska, A., Yan, W. (2023). Effect of creepages on stress intensity factors of rolling contact fatigue cracks. Engineering Fracture Mechanics, 289. [More Information]
• Yan, S., Nie, Y., Paradowska, A. (2023). Effect of specimen size and crystallographic orientation on the nano/microscale mechanical properties and deformation behavior of CrCoNi medium-entropy alloy. Materials and Design, 235, 112387. [More Information]
• Kendall, O., Abrahams, R., Paradowska, A., Reid, M., Qiu, C., Mutton, P., Schläfer, T., Yan, W. (2023). Influence of multi-layer laser cladding depositions and rail curvature on residual stress in light rail components. Engineering Failure Analysis, 150. [More Information]
• Kendall, O., Paradowska, A., Abrahams, R., Reid, M., Qiu, C., Mutton, P., Yan, W. (2023). Residual Stress Measurement Techniques for Metal Joints, Metallic Coatings and Components in the Railway Industry: A Review. Materials, 16(1). [More Information]
• Ermakova, A., Razavi, J., Cabeza, S., Gadalinska, E., Reid, M., Paradowska, A., Ganguly, S., Berto, F., Mehmanparast, A. (2023). The effect of surface treatment and orientation on fatigue crack growth rate and residual stress distribution of wire arc additively manufactured low carbon steel components. Journal of Materials Research and Technology, 24, 2988-3004. [More Information]

2022

• Lim, B., Chen, H., Nomoto, K., Chen, Z., Saville, A., Vogel, S., Clarke, A., Paradowska, A., Reid, M., Primig, S., Liao, X., Breen, A., Ringer, S., et al (2022). Additively manufactured Haynes-282 monoliths containing thin wall struts of varying thicknesses. Additive Manufacturing, 59. [More Information]
• Kendall, O., Fasihi, P., Abrahams, R., Paradowska, A., Reid, M., Lai, Q., Qiu, C., Mutton, P., Soodi, M., Yan, W. (2022). Application of a New Alloy and Post Processing Procedures for Laser Cladding Repairs on Hypereutectoid Rail Components. Materials, 15(15). [More Information]
• Chen, S., Huang, E., Chiu, S., Reid, M., Wu, C., Paradowska, A., Lam, T., Wu, Y., Lee, S., Lu, S., et al (2022). Diffraction-based Residual Stress Mapping of a Stress Frame of Gray Iron via Vibratory Stress Relief Method. Frontiers in Minerals, 9. [More Information]
• Alipooramirabad, H., Paradowska, A., Reid, M., Ghomashchi, R. (2022). Effect of holding time on strain relaxation in high-strength low-alloy steel welds: An in-situ neutron diffraction approach. Journal of Manufacturing Processes, 73, 326-339. [More Information]
• Zhu, C., Fordyce, I., Sun, S., Annasamy, M., Fabijanic, D., Short, K., Paradowska, A., Leary, M., Brandt, M., Easton, M. (2022). Effect of Ti and TiC additions on the microstructure and wear resistance of high chromium white irons produced by laser directed energy deposition. Wear, 510-511. [More Information]
• Alipooramirabad, H., Paradowska, A., Reid, M., Ghomashchi, R. (2022). Effects of PWHT on the Residual Stress and Microstructure of Bisalloy 80 Steel Welds. Metals, 12(10). [More Information]
• Stroh, J., Sediako, D., Lombardi, A., Byczynski, G., Reid, M., Paradowska, A. (2022). Evolution of residual stress through the processing stages in manufacturing of bore-chilled sand-cast aluminum engine blocks with pressed-in iron liners. International Journal of Advanced Manufacturing Technology, 120(7-8), 4693-4705. [More Information]
• Vidler, J., Kotousov, A., Hughes, J., Paradowska, A., Reid, M., Ng, C. (2022). Feasibility of early fatigue damage evaluation using the Neutron diffraction method. Engineering Failure Analysis, 141. [More Information]
• Faisal, N., Ahmed, R., Prathuru, A., Paradowska, A., Lee, T. (2022). Measuring Residual Strain and Stress in Thermal Spray Coatings Using Neutron Diffractometers. Experimental Mechanics, 62(3), 369-392. [More Information]
• Ostergaard, H., Pribe, J., Tarik Hasib, M., Paradowska, A., Siegmund, T., Kruzic, J. (2022). Near-threshold fatigue crack growth in laser powder bed fusion produced alloy 718. International Journal Of Fatigue, 163. [More Information]
• Shen, C., Ma, Y., Reid, M., Pan, Z., Hua, X., Cuiuri, D., Paradowska, A., Wang, L., Li, H. (2022). Neutron diffraction residual stress determinations in titanium aluminide component fabricated using the twin wire-arc additive manufacturing. Journal of Manufacturing Processes, 74, 141-150. [More Information]

2021

• Vu, T., Gowripalan, N., De Silva, P., Paradowska, A., Garbe, U., Kidd, P., Sirivivatnanon, V. (2021). Assessing carbonation in one-part fly ash/slag geopolymer mortar: Change in pore characteristics using the state-of-the-art technique neutron tomography. Cement and Concrete Composites, 114, 103759. [More Information]
• Chin, K., Idapalapati, S., Paradowska, A., Reid, M., Shukla, S., Ardi, D. (2021). Mechanical Stress Relaxation of a Laser Peened and Shot Peened Ni-Based Superalloy. 1st International Conference on Advanced Surface Enhancement, Germany: Springer Science and Business Media Deutschland GmbH. [More Information]
• Ahuja, Y., Ibrahim, R., Paradowska, A., Riley, D. (2021). Probeless tool aided friction stir welding as a fabrication technique for tungsten embedded mechanical composite of copper. ASME 2014 Pressure Vessels and Piping Conference, United States: American Society of Mechanical Engineers (ASME). [More Information]
• Li, D., Paradowska, A., Uy, B., Wang, J., Proust, G., Kazemzadeh Azad, S., Huang, Y. (2021). Residual stress measurements of lean duplex stainless steel welded sections. Journal of Constructional Steel Research, 186, 106883. [More Information]
• Kianfar, S., Stroh, J., Bahramian, N., Sediako, D., Lombardi, A., Byczynski, G., Mayr, P., Reid, M., Paradowska, A. (2021). Residual Stress Prediction in the Casting Process of Automotive Powertrain Components. In Linus Perander (Eds.), Light Metals 2021: 50th Anniversary Edition, (pp. 858-864). Cham: Springer. [More Information]

2020

• Alipooramirabad, H., Paradowska, A., Nafisi, S., Reid, M., Ghomashchi, R. (2020). Post-weld heat treatment of API 5L x70 high strength low alloy steel welds. Materials, 13(24), 1-24. [More Information]
• Roy, T., Paradowska, A., Abrahams, R., Law, M., Mutton, P., Soodi, M., Yan, W. (2020). Residual stress in laser cladded heavy-haul rails investigated by neutron diffraction. Journal of Materials Processing Technology, 278. [More Information]
• Le, T., Paradowska, A., Bradford, M., Liu, X., Valipour, H. (2020). Residual stresses in welded high-strength steel I-Beams. Journal of Constructional Steel Research, 167, 105849. [More Information]
• Li, D., Paradowska, A., Uy, B., Wang, J., Khan, M. (2020). Residual stresses of box and I-shaped columns fabricated from S960 ultra-high-strength steel. Journal of Constructional Steel Research, 166, 105904. [More Information]
• Stroh, J., Sediako, D., Byczynski, G., Lombardi, A., Paradowska, A. (2020). Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction. Light Metals Symposium held at the 149th Annual Meeting and Exhibition, Switzerland: Springer Science and Business Media Deutschland GmbH. [More Information]

2019

• Kirkwood, H., Wensrich, C., Paradowska, A., Abbey, B. (2019). Application and validity of the Radon transform applied to axisymmetric neutron strain imaging. International Journal of Solids and Structures, 180-181, 137-146. [More Information]
• Tremsin, A., Sokolova, A., Salvemini, F., Luzin, V., Paradowska, A., Muránsky, O., Kirkwood, H., Abbey, B., Wensrich, C., Kisi, E. (2019). Energy-resolved neutron imaging options at a small angle neutron scattering instrument at the Australian Center for Neutron Scattering. Review of Scientific Instruments, 90(3). [More Information]
• Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M., Fasihi, P., Yan, W. (2019). Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails. Wear, 432-433. [More Information]
• Aba-Perea, P., Withers, P., Pirling, T., Paradowska, A., Ma, D., Preuss, M. (2019). In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50(8), 3555-3565. [More Information]
• Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Soodi, M., Wu, X. (2019). Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails. Journal of Materials Processing Technology, 263, 1-20. [More Information]
• Sun, S., Fabijanic, D., Annasamy, M., Gallo, S., Fordyce, I., Paradowska, A., Leary, M., Easton, M., Brandt, M. (2019). Microstructure, abrasive wear and corrosion characterisation of laser metal deposited Fe-30Cr-6Mo-10Ni-2.2C alloy. Wear, 438-439. [More Information]

2018

• Paul, S., Singh, R., Yan, W., Samajdar, I., Paradowska, A., Thool, K., Reid, M. (2018). Critical deposition height for sustainable restoration via laser additive manufacturing. Scientific Reports, 8(1). [More Information]
• Roy, T., Lai, Q., Abrahams, R., Mutton, P., Paradowska, A., Soodi, M., Yan, W. (2018). Effect of deposition material and heat treatment on wear and rolling contact fatigue of laser cladded rails. Wear, 412-413, 69-81. [More Information]
• Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Fang, X., Soodi, M., Wu, X. (2018). Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels. Materials Science & Engineering A, 712, 548-563. [More Information]
• Tremsin, A., Kockelmann, W., Kelleher, J., Paradowska, A., Ramadhan, R., Fitzpatrick, M. (2018). Energy-resolved neutron imaging for reconstruction of strain introduced by cold working. Journal of Imaging, 4(3). [More Information]
• Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M., Yan, W. (2018). Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails. 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Netherlands: TU Delft.
• Kirkwood, H., De Jonge, M., Muránsky, O., Hofmann, F., Howard, D., Ryan, C., van Riessen, G., Rowles, M., Paradowska, A., Abbey, B. (2018). Simultaneous X-ray diffraction, crystallography and fluorescence mapping using the Maia detector. Acta Materialia, 144, 1-10. [More Information]

2017

• Law, M., Paradowska, A., Hoye, N., Grace, P. (2017). Assessment of residual stress, hardness, and defect tolerance in a tee joint, as-welded and after post-weld heat treatment. The Journal of Pipeline Engineering, 16(1), 27-32.
• Zhao, Y., Le Joncour, L., Baczmanski, A., Franois, M., Wronski, S., Panicaud, B., Gadalinska, E., Braham, C., Buslaps, T., Paradowska, A. (2017). Elastoplastic deformation and damage process in duplex steel studied using synchrotron and neutron diffraction. 8th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Lai, Q., Abrahams, R., Yan, W., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T. (2017). Finite element analysis of thermal cycle in laser cladding for railway repair. 9th Australasian Congress on Applied Mechanics (ACAM9), : Springer Verlag.
• Alipooramirabad, H., Paradowska, A., Lavigne, O., Ghomashchi, R., Reid, M. (2017). In situ neutron diffraction measurement of strain relaxation in welds during heat treatment. Science and Technology of Welding and Joining, 22(6), 484-495. [More Information]
• Garbe, U., Ahuja, Y., Ibrahim, R., Li, H., Aldridge, L., Salvemini, F., Paradowska, A. (2017). Industrial Application Experiments on the Neutron Imaging Instrument DINGO. Neutron Imaging for Applications in Industry and Science Proceedings of the 8th International Topical Meeting on Neutron Radiography ITMNR-8, Beijing: Elsevier B.V. [More Information]
• Alipooramirabad, H., Paradowska, A., Ghomashchi, R., Reid, M. (2017). Investigating the effects of welding process on residual stresses, microstructure and mechanical properties in HSLA steel welds. Journal of Manufacturing Processes, 28, 70-81. [More Information]
• Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Soodi, M. (2017). Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology. Composites Part B, 130, 174-191. [More Information]
• Lai, Q., Abrahams, R., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T., Yan, W. (2017). Laser cladding for railway repair: Influence of depositing materials and heat treatment on microstructural characteristics. 1st International Conference on Rail Transportation 2017, Reston VA USA: Ultrasound International. [More Information]
• Ahuja, Y., Abrahams, R., Paradowska, A. (2017). Neutron diffraction based non-destructive techniques for integrity studies on copper-stainless steel hybrid composites fabricated by friction stir forming. 9th Australasian Congress on Applied Mechanics (ACAM9), : Springer Verlag.
• Kirkwood, H., De Jonge, M., Howard, D., Ryan, C., van Riessen, G., Hofmann, F., Rowles, M., Paradowska, A., Abbey, B. (2017). Polycrystalline materials analysis using the Maia pixelated energy-dispersive X-ray area detector. Powder Diffraction, 32(S2), S16-S21. [More Information]
• Roy, T., Paradowska, A., Lai, Q., Abrahams, R., Law, M., Mutton, P., Soodi, M., Yan, W. (2017). Residual stress measurement in laser cladded rail utilizing neutron diffraction technique. 9th Australasian Congress on Applied Mechanics (ACAM9), : Springer Verlag. [More Information]
• Ren, Y., Paradowska, A., Wang, B., Eren, E., Jin Janin, Y. (2017). Residual Stress State of X65 Pipeline Girth Welds before and after Local and Furnace Post Weld Heat Treatment. Journal of Pressure Vessel Technology: Transactions of the ASME, 139(4). [More Information]
• Haque, R., Wong, Y., Paradowska, A., Blacket, S., Durandet, Y. (2017). SPR characteristics curve and distribution of residual stress in self-piercing riveted joints of steel sheets. Advances in Materials Science and Engineering, 2017. [More Information]
• Roy, T., Abrahams, R., Lai, Q., Mutton, P., Soodi, M., Paradowska, A., Yan, W. (2017). Tribological behaviour of laser cladded rail under rolling contact test. 1st International Conference on Rail Transportation 2017, Reston VA USA: Ultrasound International. [More Information]

2016

• Tremsin, A., Kockelmann, W., Paradowska, A., Zhang, S., Korsunsky, A., Shinohara, T., Feller, W., Lehmann, E. (2016). Investigation of microstructure within metal welds by energy resolved neutron imaging. 6th European Conference on Neutron Scattering, United Kingdom: Institute of Physics Publishing. [More Information]
• Alipooramirabad, H., Paradowska, A., Ghomashchi, R., Kotousov, A., Hoye, N. (2016). Prediction of welding stresses in WIC test and its application in pipelines. Materials Science and Technology, 32(14), 1462-1470. [More Information]
• Ren, Y., Paradowska, A., Wang, B., Eren, E. (2016). Residual stress state of x65 pipeline girth welds before and after local and furnace post weld heat treatment. ASME 2016 Pressure Vessels and Piping Conference, United States: American Society of Mechanical Engineers (ASME). [More Information]
• Alipooramirabad, H., Ghomashchi, R., Paradowska, A., Reid, M. (2016). Residual stress- microstructure- mechanical property interrelationships in multipass HSLA steel welds. Journal of Materials Processing Technology, 231, 456-467. [More Information]
• Khan, M., Paradowska, A., Uy, B., Mashiri, F., Tao, Z. (2016). Residual stresses in high strength steel welded box sections. Journal of Constructional Steel Research, 116, 55-64. [More Information]

2015

• Ahuja, Y., Abrahams, R., Paradowska, A., Riley, D. (2015). Friction stir forming to fabricate copper-tungsten composite. Journal of Materials Processing Technology, 217, 222-231. [More Information]
• Alipooramirabad, H., Paradowska, A., Ghomashchi, R., Kotousov, A., Reid, M. (2015). Quantification of residual stresses in multi-pass welds using neutron diffraction. Journal of Materials Processing Technology, 226, 40-49. [More Information]
• Haque, R., Wong, Y., Paradowska, A., Durandet, Y. (2015). Residual stress profiles in riveted joints of steel sheets. Science and Technology of Welding and Joining, 20(3), 199-207. [More Information]

2014

• Zhuang, W., Liu, Q., Djugum, R., Sharp, P., Paradowska, A. (2014). Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy. Applied Surface Science, 320, 558-562. [More Information]
• Aloraier, A., Al-fadhalah, K., Paradowska, A., Alfaraj, E. (2014). Effect of welding polarity on bead geometry, microstructure, microhardness, and residual stresses of 1020 steel. Magallat al-Abhat al-Handasiyyat, 2(4), 137-160. [More Information]
• Tremsin, A., McPhate, J., Vallerga, J., Siegmund, O., Kockelmann, W., Paradowska, A., Zhang, S., Kelleher, J., Steuwer, A., Feller, W. (2014). High-resolution strain mapping through time-of-flight neutron transmission diffraction. 6th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Song, S., Paradowska, A., Dong, P. (2014). Investigation of residual stresses distribution in titanium weldments. 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Hoye, N., Li, H., Cuiuri, D., Paradowska, A., Thorogood, K. (2014). Investigation of residual stresses in titanium aerospace components formed via additive manufacturing. 8th Australasian Congress on Applied Mechanics (ACAM 8), Barton, ACT: Engineers Australia.
• Khodabakhshi, B., Paradowska, A., Ibrahim, R., Mutton, P. (2014). Measurement of residual stresses in aluminothermic rail welds using neutron diffraction technique. 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Hoye, N., Li, H., Cuiuri, D., Paradowska, A. (2014). Measurement of residual stresses in titanium aerospace components formed via additive manufacturing. 7th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Shalev, S., Caspi, E., Shilstein, S., Paradowska, A., Kockelmann, W., Kan-Cipor Meron, T., Levy, Y. (2014). Middle Bronze Age II Battleaxes from Rishon LeZion, Israel: Archaeology and metallurgy. Archaeometry, 56(2), 279-295. [More Information]
• Paradowska, A., Larkin, N., Li, H., Pan, Z., Shen, C., Law, M. (2014). Neutron diffraction residual stress measurements of welds made with pulsed tandem gas metal arc welding (PT-GMAW). Powder Diffraction, 29, S24-S27. [More Information]
• Olsen, S., Gilbert, E., Booth, N., Pullen, S., Imperia, P., Peterson, V., Garbe, U., Dieter-Liss, K., Luzin, V., Paradowska, A., et al (2014). Novel non destructive sample analysis techniques using neutron scattering. 8th Australasian Congress on Applied Mechanics (ACAM 8), Barton, ACT: Engineers Australia.
• Mashiri, F., Paradowska, A., Uy, B., Tao, Z., Khan, M., Dayal, P. (2014). Residual stresses distribution measured by neutron diffraction in fabricated square high strength steel tubes. Materials Science Forum, 777, 249-254. [More Information]
• Baczmaski, A., Gadalinska, E., Wronski, S., Le Joncour, L., Panicaud, B., Francois, M., Braham, C., Klosek, V., Paradowska, A. (2014). Study of stresses in texture components using neutron diffraction. 9th International Conference on Residual Stresses, Switzerland: Trans Tech Publications Ltd. [More Information]

2013

• Francois, M., Panicaud, B., Le Joncour, L., Baczmaski, A., Paradowska, A., Wronski, S., Gadalinska, E. (2013). Comparison of strain/stress behaviour of a duplex stainless steel between mesoscopic and macroscopic scales by neutron measurements extended to the necking range. Thin Solid Films, 530, 62-65. [More Information]
• Lee, S., Huang, E., Wu, W., Liaw, P., Paradowska, A. (2013). Development of crystallographic-orientation-dependent internal strains around a fatigue-crack tip during overloading and underloading. Materials Characterization, 79, 7-14. [More Information]
• Gong, W., Tomota, Y., Adachi, Y., Paradowska, A., Kelleher, J., Zhang, S. (2013). Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel. Acta Materialia, 61(11), 4142-4154. [More Information]
• Muránsky, O., Holden, T., Kirstein, O., James, J., Paradowska, A., Edwards, L. (2013). Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange. Journal of Nuclear Materials, 438(1-3), 154-162. [More Information]
• Mashiri, F., Paradowska, A., Uy, B., Tao, Z., Khan, M. (2013). Measurement of residual stresses in fabricated square high strength steel tubes using neutron diffraction method. 5th International Conference on Advances in Experimental Structural Engineering, AESE 2013, Taiwan: EUCENTRE.
• Haigh, R., Hutchings, M., James, J., Ganguly, S., Mizuno, R., Ogawa, K., Okido, S., Paradowska, A., Fitzpatrick, M. (2013). Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness. International Journal Of Pressure Vessels And Piping, 101, 1-11. [More Information]
• Haque, R., Durandet, Y., Wong, Y., Paradowska, A., Beynon, J., Blacket, S. (2013). Optimising parameters for meaningful measurement of residual strain by neutron diffraction in self-pierce riveted joints. Science and Technology of Welding and Joining, 18(6), 492-499. [More Information]
• Skouras, A., Paradowska, A., Peel, M., Flewitt, P., Pavier, M. (2013). Residual stress measurements in a ferritic steel/In625 superalloy dissimilar metal weldment using neutron diffraction and deep-hole drilling. International Journal Of Pressure Vessels And Piping, 101, 143-153. [More Information]

2012

• Haynes, R., Paradowska, A., Chowdhury, M., Goodway, C., Done, R., Kirichek, O., Oliver, E. (2012). An inert-gas furnace for neutron scattering measurements of internal stresses in engineering materials. Measurement Science and Technology, 23(4). [More Information]
• Knupfer, S., Paradowska, A., Kirstein, O., Moore, A. (2012). Characterization of the residual strains in iterative laser forming. Journal of Materials Processing Technology, 212(1), 90-99. [More Information]
• Pierret, S., Evans, A., Paradowska, A., Kaestner, A., James, J., Etter, T., Van Swygenhoven, H. (2012). Combining neutron diffraction and imaging for residual strain measurements in a single crystal turbine blade. NDT and E International, 45(1), 39-45. [More Information]
• Tremsin, A., McPhate, J., Steuwer, A., Kockelmann, W., Paradowska, A., Kelleher, J., Vallerga, J., Siegmund, O., Feller, W. (2012). High-resolution strain mapping through time-of-flight neutron transmission diffraction with a microchannel plate neutron counting detector. Strain, 48(4), 296-305. [More Information]
• Paddea, S., Francis, J., Paradowska, A., Bouchard, P., Shibli, I. (2012). Residual stress distributions in a P91 steel-pipe girth weld before and after post weld heat treatment. Materials Science & Engineering A, 534, 663-672. [More Information]
• Kundu, A., Bouchard, P., Kumar, S., Venkata, K., Francis, J., Paradowska, A., Dey, G., Truman, C. (2012). Residual stresses in P91 steel electron beam welds. Science and Technology of Welding and Joining, 18(1), 70-75. [More Information]
• Martinez, L., Barsoum, Z., Paradowska, A. (2012). State-of-the-art: Fatigue life extension of offshore installations. 31st International Conference on Ocean, Offshore and Arctic Engineering, United States: The American Society of Mechanical Engineers. [More Information]
• Baczmaski, A., Gaj, A., Le Joncour, L., Wroski, S., Franois, M., Panicaud, B., Braham, C., Paradowska, A. (2012). Study of stress localisation in polycrystalline grains using self-consistent modelling and neutron diffraction. Philosophical Magazine, 92(24), 3015-3035. [More Information]
• Robinson, J., Tanner, D., Truman, C., Paradowska, A., Wimpory, R. (2012). The influence of quench sensitivity on residual stresses in the aluminium alloys 7010 and 7075. Materials Characterization, 65, 73-85. [More Information]
• Wu, W., Lee, S., Paradowska, A., Gao, Y., Liaw, P. (2012). Twinning-detwinning behavior during fatigue-crack propagation in a wrought magnesium alloy AZ31B. Materials Science & Engineering A, 556, 278-286. [More Information]
• Turski, M., Paradowska, A., Zhang, S., Mortensen, D., Fjaer, H., Grandfield, J., Davis, B., Delorme, R. (2012). Validation of predicted residual stresses within direct chill cast magnesium alloy slab. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 43(5), 1547-1557. [More Information]

2011

• Assuncao, E., Ganguly, S., Yapp, D., Williams, S., Paradowska, A. (2011). Characterisation of residual stress state in laser welded low carbon mild steel plates produced in keyhole and conduction mode. Science and Technology of Welding and Joining, 16(3), 239-243. [More Information]
• Suder, W., Ganguly, S., Williams, S., Paradowska, A., Colegrove, P. (2011). Comparison of joining efficiency and residual stresses in laser and laser hybrid welding. Science and Technology of Welding and Joining, 16(3), 244-248. [More Information]
• Grazzi, F., Bartoli, L., Civita, F., Franci, R., Paradowska, A., Scherillo, A., Zoppi, M. (2011). From Koto age to modern times: Quantitative characterization of Japanese swords with Time of Flight Neutron Diffraction. Journal of Analytical Atomic Spectrometry, 26(5), 1030-1039. [More Information]
• Alessandroni, M., Paradowska, A., Perelli, C., Senesi, R., Andreani, C., Gorini, G., Montedoro, P., Chiti, F., Sala, D., Spinelli, D. (2011). Investigation of residual stress distribution of wheel rims using neutron diffraction. Materials Science Forum, 681, 522-526. [More Information]
• Gaj, A., Le Joncour, L., Baczmanski, A., Wronski, S., Panicaud, B., Francois, M., Braham, C., Paradowska, A. (2011). Localization of stresses in polycrystalline grains measured by neutron diffraction and predicted by self-consistent model. Materials Science Forum, 681, 103-108. [More Information]
• Grazzi, F., Bartoli, L., Barzagli, E., Civita, F., Paradowska, A., Scherillo, A., Zoppi, M. (2011). Microstructural characterization of two Koto age Japanese swords. La Metallurgia Italiana, 103(5), 13-18.
• Ahmed, R., Faisal, N., Paradowska, A., Fitzpatrick, M., Khor, K. (2011). Neutron diffraction residual strain measurements in nanostructured hydroxyapatite coatings for orthopaedic implants. Journal of the Mechanical Behavior of Biomedical Materials, 4(8), 2043-2054. [More Information]
• Baczma?ski, A., Le Joncour, L., Panicaud, B., Francois, M., Braham, C., Paradowska, A., Wro?ski, S., Amara, S., Chiron, R. (2011). Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture. Journal of Applied Crystallography, 44(5), 966-982. [More Information]
• Festa, G., Senesi, R., Alessandroni, M., Andreani, C., Vitali, G., Porcinai, S., Giusti, A., Materna, T., Paradowska, A. (2011). Non destructive neutron diffraction measurements of cavities, inhomogeneities, and residual strain in bronzes of Ghiberti's relief from the Gates of Paradise. Journal of Applied Physics, 109(6). [More Information]

2010

• Paradowska, A., Price, J., Finlayson, T., Lienert, U., Abrahams, R. (2010). Comparison of neutron and synchrotron diffraction measurements of residual stress in bead-on-plate weldments. Journal of Pressure Vessel Technology: Transactions of the ASME, 132(1), 0115021-0115028. [More Information]
• Paradowska, A., Price, J., Finlayson, T., Rogge, R., Donaberger, R., Abrahams, R. (2010). Comparison of neutron diffraction measurements of residual stress of steel butt welds with current fitness-for-purpose assessments. Journal of Pressure Vessel Technology: Transactions of the ASME, 132(5). [More Information]
• Le Joncour, L., Panicaud, B., Baczma?ski, A., Francois, M., Braham, C., Paradowska, A., Wro?ski, S., Chiron, R. (2010). Damage in duplex steels studied at mesoscopic and macroscopic scales. Mechanics of Materials, 42(12), 1048-1063. [More Information]
• Tomota, Y., Xu, P., Oliver, E., Paradowska, A. (2010). In situ neutron diffraction during thermo-mechanically controlled process for low alloy steels. In Thomas Kannengiesser, Sudarsanam Suresh Babu, Yu-ichi Komizo, Antonio J. Ramirez (Eds.), In-situ Studies with Photons, Neutrons and Electrons Scattering, (pp. 175-190). Berlin: Springer - Verlag Italia Srl. [More Information]
• Knupfer, S., Paradowska, A., Kirstein, O., Moore, A. (2010). Investigation of residual stress in laser formed mild steel plates using neutron diffraction. 5th International Conference on Mechanical Stress Evaluation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Le Joncour, L., Panicaud, B., Baczmanski, A., Francois, M., Braham, C., Paradowska, A. (2010). Large deformation and mechanical effects of damage in aged duplex stainless steel. 5th International Conference on Mechanical Stress Evaluation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Ahmed, R., Faisal, N., Reuben, R., Paradowska, A., Fitzpatrick, M., Kitamura, J., Osawa, S. (2010). Neutron diffraction residual strain measurements in alumina coatings deposited via APS and HVOF techniques. Journal of Physics: Conference Series, 251(1), 012051-1-012051-5. [More Information]
• Ahmed, R., Faisal, N., Knupfer, S., Paradowska, A., Fitzpatrick, M., Khor, K., Cizek, J. (2010). Neutron diffraction residual strain measurements in plasma sprayed nanostructured hydroxyapatite coatings for orthopaedic implants. 5th International Conference on Mechanical Stress Evaluation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Paradowska, A., Suder, W., Williams, S. (2010). Neutron diffraction residual stress measurements in key-hole laser formed weldments. Journal of Physics: Conference Series, 251(1), 012049-1-012049-5. [More Information]
• Caspi, E., Shalev, S., Shilstein, S., Paradowska, A., Kockelmann, W., Levy, Y. (2010). Neutron diffraction study of Levantine Middle Bronze Age cast axes. Journal of Physics: Conference Series, 251(1), 012047-1-012047-6. [More Information]
• Grazzi, F., Bartoli, L., Civita, F., Paradowska, A., Scherillo, A., Zoppi, M. (2010). Non destructive characterization of phase distribution and residual strain/stress map of two ancient (Koto) age Japanese swords. 5th International Conference on Mechanical Stress Evaluation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Postma, H., Amkreutz, L., Borella, A., Clarijs, M., Kamermans, H., Kockelmann, W., Paradowska, A., Schillebeeckx, P., Visser, D. (2010). Non-destructive bulk analysis of the Buggenum sword by neutron resonance capture analysis and neutron diffraction. Journal of Radioanalytical and Nuclear Chemistry, 283(3), 641-652. [More Information]
• Robinson, J., Hossain, S., Truman, C., Paradowska, A., Hughes, D., Wimpory, R., Fox, M. (2010). Residual stress in 7449 aluminium alloy forgings. Materials Science & Engineering A, 527(10-11), 2603-2612. [More Information]
• Davies, C., Wimpory, R., Paradowska, A., Nikbin, N. (2010). Residual stress measurements in large scale component sections. 5th International Conference on Mechanical Stress Evaluation, Switzerland: Trans Tech Publications Ltd. [More Information]
• Kisi, E., Zhang, J., Kirstein, O., Riley, D., Styles, M., Paradowska, A. (2010). Shear stiffness in nanolaminar Ti3SiC2 challenges ab initio calculations. Journal of Physics: Condensed Matter, 22(16). [More Information]
• Kirstein, O., Zhang, J., Kisi, E., Riley, D., Styles, M., Paradowska, A. (2010). Single crystal elastic constants of the MAX phase Ti3AlC 2 determined by neutron diffraction. 6th International Conference on Processing and Manufacturing of Advanced Materials, Switzerland: Trans Tech Publications Ltd. [More Information]
• Paradowska, A., Price, J., Kerezsi, B., Dayawansa, P., Zhao, X. (2010). Stress relieving and its effect on life of welded tubular joints. Engineering Failure Analysis, 17(1), 320-327. [More Information]
• Cruise, R., Paradowska, A. (2010). The non-destructive measurement of residual stresses in stainless steel roll formed sections. International Colloquium on Stability and Ductility of Steel Structures (SDSS 2010), Brazil: Federal University of Rio de Janeiro.

2009

• Lee, S., Choo, H., Liaw, P., Oliver, E., Paradowska, A. (2009). In situ neutron diffraction study of internal strain evolution around a crack tip under variable-amplitude fatigue-loading conditions. Scripta Materialia, 60(10), 866-869. [More Information]
• Price, J., Paradowska, A., Finlayson, T. (2009). Measurement of residual stresses in weld repairs in steels. In Raman Singh (Eds.), Weld Cracking in Ferrous Alloys, (pp. 459-474). Cambridge: Woodhead Publishing Ltd. [More Information]
• Paradowska, A., Price, J., Finlayson, T., Lienert, U., Walls, P., Abrahams, R. (2009). Residual stress distribution in steel butt welds measured using neutron and synchrotron diffraction. Journal of Physics: Condensed Matter, 21(12). [More Information]

2008

• Price, J., Paradowska, A., Joshi, S., Finlayson, T., Semetay, C., Nied, H. (2008). Comparison of experimental and theoretical residual stresses in welds: The issue of gauge volume. International Journal of Mechanical Sciences, 50(3), 513-521. [More Information]
• Paradowska, A., Price, J., Finlayson, T., Rogge, R., Donaberger, R., Ibrahim, R. (2008). Comparison of neutron diffraction residual stress measurements of steel welded repairs with current fitness-for-purpose assessments. ASME 2008 Pressure Vessels and Piping Conference, United States of America: American Society of Mechanical Engineers (ASME). [More Information]
• Paradowska, A., Price, J., Ibrahim, R. (2008). Neutron and synchrotron diffraction measurements of residual stress in steel weldments. ASME 2008 Pressure Vessels and Piping Conference, United States of America: American Society of Mechanical Engineers (ASME). [More Information]
• Price, J., Paradowska, A., Finlayson, T. (2008). Neutron diffraction residual stress measurements of steel welded repairs and comparison with current fitness-for-purpose assessments. Welding in the World, 52(SPEC. ISS.), 693-700.

2007

• Paradowska, A., Price, J., Finlayson, T., Lienert, U., Abrahams, R. (2007). Residual stress measurements of welded components using synchrotron and neutron diffraction. Welding in the World, 51(SPEC. ISS.), 475-484.
• Paradowska, A., Price, J., Abrahams, R., Finlayson, T., Ripley, M., Blevins, R. (2007). The effects of restraint and post-weld heat treatment on residual stress distribution in a bead-on-plate weld. Journal of Neutron Research, 15(3-4), 231-241. [More Information]

2006

• Paradowska, A., Price, J., Ibrahim, R., Finlayson, T., Blevins, R., Ripley, M. (2006). Assessment of residual stresses in single-and multi-bead-on-plate weldments measured by neutron diffraction. Materials and Testing Conference 2005, United States of America: Materials Science and Technology.
• Paradowska, A., Finlayson, T., Price, J., Abrahams, R., Steuwer, A., Ripley, M. (2006). Investigation of reference samples for residual strain measurements in a welded specimen by neutron and synchrotron X-ray diffraction. Physica B: Condensed Matter, 385-386, 904-907. [More Information]
• Paradowska, A., Price, J., Dayawansa, P., Kerezsi, B., Zhao, X., Ibrahim, R. (2006). Measurement of residual stress distribution in tubular joints considering post weld heat treatment. Materials and Testing Conference 2005, United States of America: Materials Science and Technology.
• Paradowska, A., Price, J., Abrahams, R., Finlayson, T., Blevins, R., Ripley, M. (2006). Residual stress measurements by neutron diffraction in multi-bead welding. Physica B: Condensed Matter, 385-386, 890-893. [More Information]
• Price, J., Paradowska, A., Joshi, S., Finlayson, T. (2006). Residual stresses measurement by neutron diffraction and theoretical estimation in a single weld bead. International Journal Of Pressure Vessels And Piping, 83(5), 381-387. [More Information]
• Paradowska, A., Price, J., Dayawansa, P., Kerezsi, B., Zhao, X., Abrahams, R. (2006). Study of influence of post weld heat treatment on residual stress distribution in tubular joints. Welding Research Abroad, 52(2), 10-19.

2005

• Paradowska, A., Price, J., Abrahams, R., Finlayson, T. (2005). A neutron diffraction study of residual stress due to welding. Journal of Materials Processing Technology, 164-165, 1099-1105. [More Information]
• Paradowska, A., Price, J., Abrahams, R., Finlayson, T., Ripley, M., Blevins, R. (2005). Residual stress evaluation in multi-beads steel weldments using neutron difraction. Welding Research Abroad, 51(12), 40-51.
• Paradowska, A., Price, J., Ibrahim, R., Finlayson, T., Curfs, C. (2005). Study of residual stresses distribution and the influence of restraint for a single weld bead in a low carbon steelusing neutron difraction technique. Fourth Australasian Congress on Applied Mechanics 2005, Melbourne: Institute of Materials Engineering Australasia.